Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Minimum
Third-Person Shooter 2014

Minimum

75%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
155 FPS
Ultra 1080p Measured
76 FPS

1440p (2K / QHD)

Low 1440p Measured
100 FPS
Ultra 1440p Measured
49 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
26 FPS
10ms Frame Time
15ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,425
Your CPU 37,018
Graphics Card
Required 27,663
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 35 41 54
1440p QHD 49 64 77 100
1080p Full HD 76 100 119 155

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 100
1920x1080 Low 155
1920x1080 Medium 119
1920x1080 Ultra 76
2560x1440 High 64
2560x1440 Low 100
2560x1440 Medium 77
2560x1440 Ultra 49
3840x2160 High 35
3840x2160 Low 54
3840x2160 Medium 41
3840x2160 Ultra 26

Performance Analysis: Minimum on Your System

FAQ

Q: Can this PC run Minimum at 60 FPS in 4K?

A: No. At 3840x2160, the recorded data shows no settings preset reaches 60 FPS. The closest is Low at 54 FPS average, followed by Medium at 41 FPS, High at 35 FPS, and Ultra at 26 FPS.

Q: What is the best playable setting at 1440p?

A: High settings at 2560x1440 delivers 64 FPS average, which clears the 60 FPS threshold. Low runs at 100 FPS and Medium at 77 FPS, but High is the most demanding preset that stays playable.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: The data indicates the GPU is the primary constraint. At 1920x1080, the frame rate scales significantly with graphics preset: Low hits 155 FPS, Medium drops to 119 FPS, High to 100 FPS, and Ultra to 76 FPS. This large spread across settings points to GPU-bound behavior.

Q: How does the RTX 2060 compare to its nearest rivals?

A: The RTX 2060's average benchmark score is 15290, placing it at the 58th percentile among all GPUs. Its closest rival, the GTX 580, scores 15283 (a 0% delta), while the RTX 3050 OEM is 0.6% behind and the RX 7600 is 0.8% behind.

Q: Which resolution offers the highest FPS headroom?

A: 1920x1080 at Low settings delivers 155 FPS average, which is the highest recorded frame rate in the dataset. Even at Ultra, the 1080p result of 76 FPS remains above the 60 FPS playability threshold.

Q: What is the combo's overall rank among tested systems?

A: The AMD Ryzen 5 5500X3D plus RTX 2060 combination ranks 2929 out of 3712 tested combos in Minimum, placing it in the lower portion of the database's tested configurations.

Similar Performance Alternatives

The CPU and GPU each have near-neighbor hardware in the database that would deliver comparable performance. For the AMD Ryzen 5 5500X3D, the average benchmark score is 37018, which puts it at the 85th percentile of all CPUs. The closest rival is the AMD Ryzen AI 7 PRO 450 with a score of 37093, a delta of -0.2%, meaning the Ryzen 5 5500X3D trails by a negligible margin. The AMD Ryzen 5 5600F scores 36945, a 0.2% difference, while the Intel Core Ultra 5 225 also scores 36938, another 0.2% delta. The Intel Core i9-12900T sits at 37112, which is 0.3% higher. All four rivals are within a fraction of a percent, so swapping to any of them would produce virtually identical CPU-bound frame rates in Minimum.

On the GPU side, the NVIDIA GeForce RTX 2060 has an average score of 15290 and sits at the 58th percentile of all GPUs. The nearest rival is the NVIDIA GeForce GTX 580 with a score of 15283, a 0% delta, meaning the two are statistically indistinguishable in average performance. The AMD Radeon 680M scores 15270, just 0.1% lower. The NVIDIA GeForce RTX 3050 OEM trails by 0.6% with a score of 15199, and the AMD Radeon RX 7600 scores 15171, a 0.8% gap. These deltas are all under one percent, so any of these GPUs would produce nearly identical frame rates in Minimum at the same settings and resolution. The practical takeaway is that this system's performance profile is tightly clustered with mid-range hardware from several generations, and users with any of these alternatives should expect matching results.

CPU and GPU Roles

The measured frame rates across resolutions and presets reveal how the workload shifts between the CPU and GPU in Minimum. At 1920x1080, the frame rate changes dramatically with graphics settings: Low produces 155 FPS, Medium 119 FPS, High 100 FPS, and Ultra 76 FPS. This 79 FPS spread between Low and Ultra is substantial and indicates that the GPU is heavily involved even at the lowest settings. The CPU, with its 6 cores, 12 threads, and 96 MB of shared L3 cache, has ample headroom at this resolution; the bottleneck is clearly the RTX 2060's rendering throughput.

Moving to 2560x1440, the same pattern continues but with lower absolute numbers. Low runs at 100 FPS, Medium at 77 FPS, High at 64 FPS, and Ultra drops to 49 FPS. The gap between Low and Ultra narrows to 51 FPS, but the GPU still dominates the performance ceiling. At 3840x2160, the GPU becomes even more decisive: Low delivers 54 FPS, Medium 41 FPS, High 35 FPS, and Ultra 26 FPS. Here the spread is 28 FPS, and no setting reaches 60 FPS, confirming that the GPU is the sole limiting factor at 4K.

The CPU's role is best understood by observing that even at 1080p Low, where the GPU load is lightest, the frame rate reaches 155 FPS without hitting a CPU wall. The Ryzen 5 5500X3D's single-thread score of 2941 and multithread score of 20363 in PassMark suggest it can feed frames well beyond the RTX 2060's capabilities. As resolution increases, the CPU's contribution diminishes further, because each frame requires more GPU work and the same instruction stream from the CPU. The data shows a monotonic decline in FPS as resolution rises at every preset, which is the classic signature of a GPU-bound title. Users upgrading from 1080p to 1440p will see roughly a 35% to 40% drop in FPS at the same settings, while moving from 1440p to 4K costs another 45% to 50%, all consistent with GPU scaling rather than CPU limitations.

How This Combo Ranks

The combination of AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 2060 ranks 2929 out of 3712 tested combos in Minimum. This places the system in the bottom 21% of the database's configurations, which is a low position for a game released in 2014. The rank reflects the GPU's modest standing: the RTX 2060 is at the 58th percentile among all GPUs, and its average score of 15290 is only slightly above its nearest rivals. The CPU, by contrast, is strong at the 85th percentile, but in this title the GPU's performance ceiling dominates the final frame rates.

The rank of 2929 means that 2928 other tested combinations delivered better overall performance in Minimum. That is a substantial number, and it indicates that many systems with newer or higher-tier GPUs will outpace this setup. However, the rank is not the entire story: the game's playability threshold is 60 FPS, and this combo clears that at 1080p across all presets and at 1440p up to High. The low rank is more about the GPU's absolute ceiling than about playability at common resolutions. The data shows that the RTX 2060's performance is clustered with cards like the GTX 580 and RX 7600, all within 0.8% of each other, so this rank is representative of a mid-range GPU tier rather than a defective pairing.

The Verdict

The recorded data shows that this PC can run Minimum, but the playable resolution and settings depend on the target. At 1920x1080, the system clears 60 FPS at every preset: Low runs at 155 FPS, Medium at 119 FPS, High at 100 FPS, and Ultra at 76 FPS. This is a fully playable experience with headroom above the 60 FPS threshold, even at the highest quality setting. At 2560x1440, the system remains playable at Low (100 FPS), Medium (77 FPS), and High (64 FPS), but Ultra falls to 49 FPS, which is below the threshold. At 3840x2160, no preset reaches 60 FPS: the best case is Low at 54 FPS, followed by Medium at 41 FPS, High at 35 FPS, and Ultra at 26 FPS.

The verdict is straightforward: this combo is a solid 1080p machine for Minimum, capable of max settings at a comfortable frame rate. At 1440p, it offers a good experience at High or lower, but Ultra is not viable. At 4K, the GPU runs out of headroom entirely, and users should avoid this resolution for smooth play. The CPU is not the constraint at any resolution; the RTX 2060's 6 GB of GDDR6 memory and 336.0 GB/s bandwidth are the limiting factors as resolution climbs.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 76 FPS. This is the optimal choice for visual quality at this resolution, as it clears the threshold by 16 FPS. The minimum FPS is not recorded for Ultra, but the average is comfortably above 60, so frame pacing should be acceptable.

At 2560x1440, the best playable preset is High, delivering 64 FPS average. This is just 4 FPS above the 60 FPS threshold, leaving minimal headroom. Medium runs at 77 FPS and Low at 100 FPS, but High offers the best balance of visual fidelity and performance. The minimum FPS at High is not recorded, but the average suggests it is a borderline but viable choice.

At 3840x2160, no preset is playable at 60 FPS. The closest option is Low at 54 FPS, which is 6 FPS short of the threshold. Medium records a minimum of 35 FPS and a maximum of 47 FPS, with an average of 41 FPS, indicating inconsistent frame delivery. For 4K, users would need to lower the resolution or accept sub-60 FPS performance, as the database lists no playable settings at this resolution.