Instant compatibility check with FPS benchmarks and optimization tips
Minecraft
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 46 | 74 | 93 | 117 |
| 1440p QHD | 88 | 141 | 177 | 224 |
| 1080p Full HD | 139 | 223 | 281 | 355 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Minecraft on Your System
Best Settings per Resolution
The data shows that this combination delivers a playable experience at every resolution tested, though the ceiling for quality settings varies significantly as resolution increases.
At 3840x2160 (4K), the most demanding preset that holds at or above 60 FPS is High, with an average of 74 FPS. The Medium preset also clears the threshold at 93 FPS, and Low runs at 117 FPS, but Ultra drops to 46 FPS, which falls below the playable floor. Pushing to Ultra at 4K is therefore not advisable for sustained gameplay.
At 2560x1440, the best settings that remain playable are Ultra, averaging 88 FPS. This is a notable jump from 4K, where the same preset fails to reach 60 FPS. The scaling from 4K to 1440p grants the headroom needed to enable the highest quality tier. High sits at 141 FPS, Medium at 177 FPS, and Low at 224 FPS, all well above the threshold.
At 1920x1080, the maximum quality preset that stays above 60 FPS is again Ultra, but with substantially more margin: 139 FPS on average. This is the strongest result of the three resolutions, and the gap between Ultra and the next tier down is large. High reaches 223 FPS, Medium 281 FPS, and Low 355 FPS. At 1080p, the GPU is not the limiting factor; the frame rates are high enough that other bottlenecks begin to appear.
The pattern is clear: 4K caps out at High, while 1440p and 1080p both allow Ultra. The 74 FPS at 4K High is playable but leaves little room for dips in demanding scenes, whereas the 88 FPS at 1440p Ultra and 139 FPS at 1080p Ultra provide comfortable margins.
CPU and GPU Roles
For Minecraft, the division of labor between the Intel Core Ultra 5 245 and the NVIDIA GeForce RTX 2060 shifts noticeably across resolutions. The recorded data shows that frame rates scale strongly with resolution, which points to the GPU becoming more influential as pixel count rises.
At 1920x1080, the Low preset hits 355 FPS and Ultra still reaches 139 FPS. The CPU, with its 14 cores and boost clock of 5.10 GHz, is capable of feeding the GPU at these high frame rates. The delta between Low and Ultra at 1080p is 216 FPS, which indicates that both the CPU and GPU are handling the workload well, but the GPU is not the primary constraint at lower resolutions. The CPU's single-thread performance, as reflected in a Cinebench R23 single-core score of 4648, is more than adequate for Minecraft's largely single-threaded rendering logic.
At 2560x1440, the same preset sweep shows Low at 224 FPS and Ultra at 88 FPS, a drop of 136 FPS from Low to Ultra. The gap between 1080p and 1440p at the same settings is substantial: Low falls from 355 to 224 FPS, and Ultra from 139 to 88 FPS. This scaling indicates the GPU is becoming the limiting factor, as the increased pixel workload directly reduces output.
At 3840x2160, the trend accelerates. Low yields 117 FPS, Medium 93 FPS, and High 74 FPS, while Ultra collapses to 46 FPS. The step from 1440p to 4K roughly halves the frame rate at every preset tier. This is the signature of GPU-bound performance: the RTX 2060's 6 GB memory and 192-bit bus width are sufficient for moderate settings, but the 4K pixel count overwhelms the card at Ultra quality.
The CPU's role is most visible at 1080p, where frame rates exceed 200 FPS on lower presets. At 4K, the CPU matters less because the GPU cannot keep up. The benchmark results indicate that this is a GPU-limited system at 1440p and above, with the CPU providing ample headroom across all tested configurations.
Measured FPS Breakdown
The complete measured FPS data, organized by resolution and settings, is as follows.
3840x2160 (4K):
- Low: average 117 FPS
- Medium: average 93 FPS, minimum 79 FPS, maximum 107 FPS
- High: average 74 FPS
- Ultra: average 46 FPS
The Medium preset at 4K is the only one with recorded min and max values, showing a spread of 28 FPS between the floor and ceiling. The Ultra preset's 46 FPS average is the only sub-60 result in the entire dataset.
2560x1440:
- Low: average 224 FPS
- Medium: average 177 FPS, minimum 151 FPS, maximum 204 FPS
- High: average 141 FPS
- Ultra: average 88 FPS
At 1440p, the Medium preset again provides the only min/max pair, with a 53 FPS spread. The Ultra preset's 88 FPS is comfortably above the playable threshold, and even the minimum recorded value at Medium (151 FPS) is far above 60 FPS.
1920x1080:
- Low: average 355 FPS
- Medium: average 281 FPS, minimum 239 FPS, maximum 323 FPS
- High: average 223 FPS
- Ultra: average 139 FPS
The 1080p Medium preset shows a spread of 84 FPS between minimum and maximum, the widest of any recorded range in the dataset. This variation suggests that scene complexity has a larger impact at high frame rates. Even the lowest recorded value at 1080p (239 FPS) exceeds the playable threshold by nearly four times.
The data shows that the RTX 2060's performance degrades gracefully from 1080p to 4K, with no sudden cliffs except at 4K Ultra. The min/max values recorded only for Medium presets indicate that this setting level was likely used for more detailed frame-time tracking, but the averages across all presets provide a consistent picture of scaling.
Similar Performance Alternatives
The nearest rivals for the CPU and GPU in the database offer a reference point for what other hardware would behave similarly in this configuration.
For the Intel Core Ultra 5 245, the closest match is the AMD Ryzen 7 PRO 5755G, with an average benchmark score of 49196 versus 48995, a delta of -0.4%. The AMD Ryzen 9 7900 scores 49228, just 0.5% higher. On the Intel side, the Intel Xeon Gold 5318H scores 48698, which is 0.6% lower, and the Intel Core i5-14600K scores 48618, 0.8% lower. These four processors sit within a 1.2% spread, meaning any of them would deliver nearly identical CPU-bound performance in Minecraft. The Core Ultra 5 245's 90th percentile ranking among all CPUs confirms its position as a strong desktop processor, not a niche part.
For the NVIDIA GeForce RTX 2060, the nearest rival is the NVIDIA GeForce GTX 580, with an average score of 15283 versus 15290, a delta of 0%. The AMD Radeon 680M scores 15270, just 0.1% lower. The NVIDIA GeForce RTX 3050 OEM scores 15199, 0.6% lower, and the AMD Radeon RX 7600 scores 15171, 0.8% lower. The RTX 2060's 58th percentile among all GPUs indicates a mid-range position. Given these near-identical average scores, a system built with any of these GPUs paired with a similar CPU would produce frame rates within a few percent of this configuration. The RX 7600 and RTX 3050 OEM are particularly relevant as newer alternatives that land in the same performance class.
If a user swapped the RTX 2060 for any of these rivals, the measured FPS in Minecraft would shift by less than 1% based on the delta values. The same logic applies to the CPU: swapping the Core Ultra 5 245 for a Ryzen 9 7900 or i5-14600K would not meaningfully change the frame rates shown here, because the game is not CPU-bound at the resolutions tested.
FAQ
Q: Can this system run Minecraft at 4K with maximum settings?
A: No. At 3840x2160 with Ultra settings, the average FPS is 46, which falls below the playable threshold of 60 FPS. The highest playable setting at 4K is High, with an average of 74 FPS.
Q: What is the best quality setting at 1440p for this combination?
A: The Ultra preset at 2560x1440 delivers an average of 88 FPS, making it the highest quality setting that stays above 60 FPS. Low, Medium, and High also clear the threshold at 224, 177, and 141 FPS respectively.
Q: How much performance drops when moving from 1080p to 4K?
A: At the same preset, the drop is substantial. For example, Low settings fall from 355 FPS at 1920x1080 to 117 FPS at 3840x2160. Ultra falls from 139 FPS at 1080p to 46 FPS at 4K.
Q: Is the CPU or GPU the limiting factor in this configuration?
A: The GPU is the primary limit at 1440p and 4K, as frame rates scale strongly with resolution. At 1080p, the CPU provides enough headroom to reach 355 FPS on Low, so the GPU remains the constraint even at lower resolutions.
Q: How does this combo rank among all tested configurations for Minecraft?
A: This combination ranks 2881 out of 3710 tested combos, placing it in the lower portion of the database. However, the rank reflects the absolute performance tier, not playability, and the measured FPS shows it is fully playable at all resolutions up to High at 4K.
Q: What settings should be avoided to maintain a smooth experience?
A: Only one setting is not recommended: Ultra at 3840x2160, which averages 46 FPS. Every other preset and resolution combination stays above 60 FPS, with the lowest playable result being 74 FPS at 4K High.
How This Combo Ranks
The database ranks this specific CPU and GPU pairing at 2881 out of 3710 tested combinations for Minecraft. This places the system in the 22nd percentile of all tested combos, meaning roughly 829 configurations performed better in this game. The rank is a composite measure, not a simple FPS ranking, and it accounts for the overall capability of the pairing across the tested presets.
What the rank does not convey is the playability picture. At 1080p, this combo reaches 139 FPS on Ultra, which is more than double the playable threshold. At 1440p, Ultra hits 88 FPS, and at 4K, High maintains 74 FPS. The rank of 2881 places this system below many higher-end configurations, but the practical outcome is that Minecraft runs smoothly at every resolution except 4K Ultra.
The gap between the rank and the playability stems from the GPU's age. The RTX 2060, released in 2019, sits at the 58th percentile among all GPUs. The CPU, by contrast, ranks at the 90th percentile, indicating a strong processor paired with a mid-range graphics card. This imbalance means the GPU holds the combo back in the rankings, even though the measured FPS shows the system is far from struggling in this particular game.
For context, the nearest rival GPUs all score within 0.8% of the RTX 2060, and the nearest rival CPUs within 0.8% as well. A system with any of those swaps would land in the same rank neighborhood, reinforcing that this is a consistent performance tier rather than an outlier.
The Verdict
The recorded data answers the core question directly: yes, this system can run Minecraft, and it does so with substantial headroom at most settings.
At 1920x1080, every preset is playable. Ultra averages 139 FPS, High 223 FPS, Medium 281 FPS, and Low 355 FPS. The lowest recorded frame rate at this resolution is 239 FPS on Medium, far above the 60 FPS playable threshold.
At 2560x1440, all four presets also clear the threshold. Ultra averages 88 FPS, High 141 FPS, Medium 177 FPS, and Low 224 FPS. The minimum recorded value at Medium is 151 FPS, leaving a comfortable buffer.
At 3840x2160, three of four presets are playable. High averages 74 FPS, Medium 93 FPS, and Low 117 FPS. Ultra averages 46 FPS, which is not playable. The verdict by resolution is: 1080p with Ultra at 139 FPS, 1440p with Ultra at 88 FPS, and 4K with High at 74 FPS.
The practical takeaway is that this combination is well suited for Minecraft at 1080p and 1440p with maximum settings, and at 4K with High settings. The only compromise required is avoiding Ultra at 4K, where the RTX 2060's 6 GB frame buffer and Turing architecture cannot sustain 60 FPS. For a game with Minecraft's art style and rendering demands, this system is more than sufficient for the vast majority of play scenarios.