Instant compatibility check with FPS benchmarks and optimization tips
Minecraft
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 105 | 168 | 212 | 267 |
| 1440p QHD | 201 | 321 | 405 | 511 |
| 1080p Full HD | 318 | 509 | 641 | 810 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Minecraft on Your System
This analysis examines the measured performance of the Intel Core i9-14900K paired with the NVIDIA GeForce RTX 4080 SUPER in Minecraft. The data is drawn directly from benchmark measurements, providing a clear picture of how this combination handles the game across common resolutions and quality presets. The results are presented in a neutral, data-driven format, focusing on frame rates, relative performance, and component roles.
Measured FPS Breakdown
The measured FPS data for this combination reveals a substantial performance envelope across all tested resolutions. At 1920x1080, the system delivers exceptionally high frame rates, with the Low preset averaging 810 FPS, Medium averaging 641 FPS with a minimum of 545 and maximum of 738, High averaging 509 FPS, and Ultra averaging 318 FPS. These numbers indicate that at 1080p, the CPU-GPU pairing is rarely the limiting factor, with even the most demanding preset producing frame rates far above typical display refresh rates.
Moving to 2560x1440, the performance remains very high but shows the expected scaling from the increased pixel count. The Low preset averages 511 FPS, Medium averages 405 FPS with a minimum of 344 and maximum of 466, High averages 321 FPS, and Ultra averages 201 FPS. The transition from 1080p to 1440p reduces average frame rates by roughly 37% on Low, 37% on Medium, 37% on High, and 37% on Ultra, demonstrating a consistent resolution scaling factor across all presets.
At 3840x2160, the performance still clears the playable threshold by a wide margin. The Low preset averages 267 FPS, Medium averages 212 FPS with a minimum of 180 and maximum of 243, High averages 168 FPS, and Ultra averages 105 FPS. The step from 1440p to 4K imposes a more significant load, with average frame rates dropping by approximately 48% on Low, 48% on Medium, 48% on High, and 48% on Ultra compared to the 1440p results. The minimum frame rates recorded at Medium settings across all resolutions show strong frame time consistency, with the 4K Medium minimum of 180 FPS still leaving substantial headroom above the 60 FPS playability threshold.
The pattern across the data shows that this combination is capable of high refresh rate gameplay even at 4K Ultra, where the 105 FPS average still exceeds 100 FPS. The absence of min and max values for most presets in the dataset suggests that in those configurations, the frame rate was stable enough that only the average was recorded, while the Medium presets at each resolution include additional frame time data, showing the variance between the 180 FPS minimum and 243 FPS maximum at 4K, the 344 to 466 range at 1440p, and the 545 to 738 range at 1080p.
Best Settings per Resolution
The most demanding preset that maintains at least 60 FPS at each resolution is Ultra across the board, per the verdict data. At 1920x1080, the Ultra preset delivers an average of 318 FPS, which is more than five times the playable threshold. This indicates that users with high refresh rate monitors at 1080p can fully utilize their display capabilities, as even the maximum preset leaves substantial performance headroom.
At 2560x1440, the Ultra preset averages 201 FPS, still well above the 60 FPS threshold. This resolution and preset combination represents a strong balance for competitive or fast-paced gameplay, as the frame rate remains high enough to support 144Hz or even 165Hz displays without compromise. The data shows no need to reduce settings at this resolution to maintain smooth gameplay.
At 3840x2160, the Ultra preset averages 105 FPS, which is the lowest average among the tested configurations but still comfortably exceeds the 60 FPS playability threshold by a factor of 1.75. This means that even at 4K resolution with maximum quality settings, the system provides a playable experience with a significant margin. The benchmark results indicate that no resolution or preset combination in the measured data falls below the playable threshold, making this combination exceptionally capable for Minecraft.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the Intel Core i9-14900KF has an average benchmark score of 79371, which is 0.3% lower than the i9-14900K. This makes the KF variant effectively identical in performance, differing only by the absence of integrated graphics. The Intel Core Ultra 9 290HX Plus scores 79574, 0.6% lower than the i9-14900K, while the AMD EPYC 7413 scores 80041, 1.2% lower. On the other side, the AMD Ryzen AI Max+ 395 scores 77740, which is 1.7% higher than the i9-14900K. These small deltas mean that in gaming scenarios, any of these CPUs would produce nearly indistinguishable frame rates when paired with the same GPU.
For the GPU, the NVIDIA GeForce RTX 4080 is the closest rival with an average score of 54247, just 0.1% lower than the RTX 4080 SUPER. The AMD Radeon Pro W5700X scores 54828, 1.1% lower, the AMD Radeon RX 6750 GRE 12 GB scores 55698, 2.7% lower, and the AMD Radeon 8060S scores 55757, 2.8% lower. These differences are marginal in the context of Minecraft, where frame rates are already extremely high. A user with the RTX 4080 instead of the RTX 4080 SUPER would see virtually identical performance, as the 0.1% delta translates to less than 1 FPS difference at any of the measured settings.
The data from the nearest rivals suggests that this system's performance is representative of a plateau among top-tier hardware. Substituting any of these near-identical alternatives would not meaningfully change the gaming experience in Minecraft, as all configurations would remain far above the 60 FPS playability threshold.
The Verdict
This PC can run Minecraft exceptionally well at all tested resolutions and presets. The verdict data confirms that at 3840x2160, all four settings — High, Low, Medium, and Ultra — are playable, with the best settings being Ultra at an average of 105 FPS. At 2560x1440, the same pattern holds, with Ultra being the best settings at 201 FPS. At 1920x1080, Ultra runs at 318 FPS. The playable threshold of 60 FPS is cleared by a wide margin in every configuration, with the lowest average being 105 FPS at 4K Ultra.
The system is not merely playable; it delivers high refresh rate performance across the board. Even the most demanding combination of 4K resolution and Ultra settings produces an average frame rate that exceeds 100 FPS, making this setup suitable for high refresh rate monitors at any resolution. The data shows no scenario where users would need to compromise on visual quality to achieve smooth gameplay, as every preset at every resolution comfortably exceeds the playability threshold.
For users with 60Hz displays, this system provides substantial headroom, often delivering 3.5 to 13.5 times the required frame rate. For users with 144Hz or 240Hz displays, the system can drive those refresh rates at 1080p and 1440p with Ultra settings, and at 4K with medium or high settings if higher frame rates are preferred over maximum quality.
FAQ
Q: What is the average FPS at 4K with Ultra settings?
A: The average FPS at 3840x2160 with Ultra settings is 105 FPS, which is well above the 60 FPS playability threshold.
Q: Can this system run Minecraft at 1440p with Ultra settings?
A: Yes, the data shows an average of 201 FPS at 2560x1440 with Ultra settings, providing a smooth experience with high headroom for high refresh rate displays.
Q: How does the RTX 4080 SUPER compare to the RTX 4080 in this game?
A: The RTX 4080 SUPER has an average benchmark score of 54209, while the RTX 4080 has a score of 54247, a delta of -0.1%. This means the RTX 4080 is essentially equivalent in performance for Minecraft.
Q: What is the fastest preset at 1080p?
A: The Ultra preset at 1920x1080 delivers an average of 318 FPS, which is the highest quality setting and still produces a very high frame rate.
Q: Is the frame rate stable at Medium settings?
A: At Medium settings, the minimum frame rates are 545 FPS at 1080p, 344 FPS at 1440p, and 180 FPS at 4K, showing strong consistency with no dips below the playable threshold.
Q: What is the playable threshold for this analysis?
A: The playable threshold is defined as 60 FPS. All measured configurations in this dataset exceed this threshold by a significant margin.
How This Combo Ranks
This specific combination of the Intel Core i9-14900K and NVIDIA GeForce RTX 4080 SUPER ranks 208th out of 3710 tested combinations in Minecraft, placing it in the top 5.6% of all tested systems. This high rank reflects the exceptional performance measured across all resolutions and presets. The percentile data for the individual components reinforces this position: the CPU ranks in the 95th percentile among all CPUs, while the GPU ranks in the 86th percentile among all GPUs.
The rank of 208 out of 3710 indicates that while this is a very high-performing combination, there are 207 other tested systems that achieve even higher frame rates in this game. These would likely include configurations with more recent or higher-end GPUs such as the GeForce 50-series or possibly dual-GPU setups, though the data does not specify which configurations rank higher. The combination's position in the top percentiles of both CPU and GPU performance, combined with its top 5.6% ranking in the game, demonstrates that this system is well-suited for Minecraft but is not the absolute peak of tested hardware.
CPU and GPU Roles
The measured FPS data reveals how the CPU and GPU each contribute to performance in Minecraft across different resolutions and presets. At 1920x1080, the average frame rates are extremely high, reaching 810 FPS on Low and 318 FPS on Ultra. The scaling from Low to Ultra at this resolution shows a 61% reduction in frame rate, indicating that the GPU is increasingly stressed as quality settings rise. However, the absolute values suggest that neither component is fully saturated at 1080p, as the frame rates are far above what most displays can show.
At 2560x1440, the frame rates drop by approximately 37% across all presets compared to 1080p. This uniform scaling suggests that the GPU is the primary bottleneck at this resolution, as the pixel count increase directly impacts rendering load. The CPU, with its high single-thread performance of 2262.5 in Cinebench R23 single-core and 4697 in PassMark single-thread, has sufficient headroom to feed the GPU at these frame rates. The 511 FPS Low preset at 1440p indicates that even at lower quality settings, the GPU is still the limiting factor, as the CPU could likely produce even higher frame rates if the GPU were faster.
At 3840x2160, the frame rates drop by an additional 48% compared to 1440p. This larger scaling factor at 4K confirms that the GPU's role becomes even more dominant at higher resolutions. The 267 FPS Low preset at 4K shows that even with minimal GPU load, the system still achieves high frame rates, but the 105 FPS Ultra preset indicates that the GPU is working much harder. The CPU's performance remains sufficient throughout, as evidenced by the fact that even the lowest frame rate at 4K Ultra (105 FPS) is far above the playable threshold, and the CPU's percentile rank of 95th among all CPUs suggests it is not a limiting factor in these scenarios.
The data indicates that for this game, the GPU is the primary determinant of performance scaling between resolutions, while the CPU provides a robust foundation that never becomes a bottleneck at the tested settings. The CPU's high single-core performance is particularly relevant for Minecraft, as the game's world generation and entity processing are known to be single-threaded workloads, though the benchmark data does not explicitly isolate these effects. The consistent resolution scaling across presets suggests that the GPU handles the rendering load proportionally to pixel count, while the CPU maintains its ability to feed frames without becoming saturated.