Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Minecraft
Sandbox 2011

Minecraft

46%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
391 FPS
Ultra 1080p Measured
153 FPS

1440p (2K / QHD)

Low 1440p Measured
247 FPS
Ultra 1440p Measured
97 FPS

4K (Ultra HD)

Low 4K Measured
129 FPS
Ultra 4K Measured
51 FPS
4.1ms Frame Time
6ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,554
Your CPU 14,185
Graphics Card
Required 26,954
Your GPU 15,171

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 51 81 102 129
1440p QHD 97 155 195 247
1080p Full HD 153 246 309 391

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 246
1920x1080 Low 391
1920x1080 Medium 309
1920x1080 Ultra 153
2560x1440 High 155
2560x1440 Low 247
2560x1440 Medium 195
2560x1440 Ultra 97
3840x2160 High 81
3840x2160 Low 129
3840x2160 Medium 102
3840x2160 Ultra 51

Performance Analysis: Minecraft on Your System

Measured FPS Breakdown

The recorded data for Minecraft with the Intel Core i5-10400F and AMD Radeon RX 7600 shows a wide performance envelope across resolutions and presets. At 1920x1080, the combination is exceptionally fast. The Low preset delivers an average of 391 FPS, which is the highest recorded figure in the entire dataset. Moving to Medium, the average drops to 309 FPS, with a minimum of 263 FPS and a maximum of 356 FPS. High settings still produce 246 FPS on average. Ultra, the most demanding preset at this resolution, maintains an average of 153 FPS. Every preset at 1080p clears the 60 FPS playable threshold by a wide margin, and even the most conservative measurements stay far above it.

At 2560x1440, performance remains strong but begins to show the expected scaling cost. Low settings average 247 FPS, while Medium averages 195 FPS with a minimum of 166 FPS and a maximum of 225 FPS. High settings yield 155 FPS on average. Ultra still delivers 97 FPS on average, which is comfortably above the 60 FPS threshold. The pattern here is consistent: each step up in quality costs a noticeable but not crippling amount of performance. The gap between Low and Ultra at this resolution is approximately 150 FPS, indicating that the GPU has ample headroom even when pushed harder.

At 3840x2160, the picture changes more dramatically. Low settings average 129 FPS, which is still very playable. Medium averages 102 FPS, with a minimum of 87 FPS and a maximum of 117 FPS, so even the worst-case recorded frame rate stays above 60 FPS. High settings average 81 FPS, which remains playable. Ultra, however, drops to an average of 51 FPS, falling below the 60 FPS playable threshold. This is the only configuration in the dataset where the combination fails to maintain playable performance. The recorded data shows a steep drop from High to Ultra at 4K, a decline of 30 FPS on average. That means users targeting 4K should stick to High or below for a smooth experience.

Looking at the data across all resolutions, the scaling from 1080p to 1440p is roughly linear, while the jump to 4K imposes a much heavier load. The minimum and maximum values are only provided for Medium settings at each resolution. At 1920x1080 Medium, the spread between minimum and maximum is 93 FPS. At 2560x1440 Medium, the spread is 59 FPS. At 3840x2160 Medium, the spread is 30 FPS. This narrowing spread at higher resolutions suggests that the workload becomes more consistently GPU-bound, reducing frame-time variance relative to the average.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for what similar hardware would deliver. For the Intel Core i5-10400F, the database lists four comparable processors. The Intel Xeon 6756E has an average score of 14163, which is 0.2% lower than the i5-10400F's average of 14185. The Intel Core 7 160UL scores 14232, which is 0.3% higher. The AMD EPYC 7552 scores 14115, or 0.5% lower. The AMD Ryzen 3 7320C scores 14277, or 0.6% higher. In practice, any of these CPUs would produce nearly identical frame rates in Minecraft, since the differences are all under one percent. The i5-10400F sits in the 68th percentile among all CPUs, meaning it outperforms roughly two-thirds of the processors in the database.

For the AMD Radeon RX 7600, the nearest rivals are similarly close. The NVIDIA GeForce RTX 3050 OEM scores 15199, which is 0.2% higher than the RX 7600's average of 15171. The AMD Radeon Pro 560X scores 15082, or 0.6% lower. The AMD Radeon 680M scores 15270, or 0.7% higher. The NVIDIA GeForce GTX 660 Ti scores 15063, or 0.7% lower. All four rivals fall within a range of roughly 1.4% of the RX 7600's average score. The GPU sits in the 57th percentile among all GPUs. In Minecraft specifically, any of these alternatives would likely produce frame rates within a few FPS of the recorded values, though the RX 7600's 8 GB of memory and modern architecture give it an edge in the most demanding scenarios. The practical takeaway is that users with any of these nearby components can expect broadly similar behavior: strong 1080p performance, good 1440p performance, and playable 4K at reduced settings.

FAQ

Q: Can this PC run Minecraft at 60 FPS on Ultra settings at 1920x1080?

A: Yes. The recorded average FPS at 1920x1080 Ultra is 153, which is more than double the 60 FPS playable threshold.

Q: What is the highest preset that maintains 60 FPS at 3840x2160?

A: High settings average 81 FPS at 4K. Ultra drops to 51 FPS on average, so High is the most demanding preset that stays playable at that resolution.

Q: How does the RX 7600 compare to its nearest GPU rival in raw benchmark scores?

A: The RX 7600 has an average benchmark score of 15171. The NVIDIA GeForce RTX 3050 OEM scores 15199, which is 0.2% higher. The AMD Radeon Pro 560X scores 15082, which is 0.6% lower.

Q: Is the CPU or GPU more likely to be the limiting factor in this game?

A: The data indicates the GPU becomes the primary constraint at higher resolutions. At 4K Ultra the average drops to 51 FPS, while the CPU's performance class is sufficient to drive very high frame rates at lower resolutions, as shown by the 391 FPS average at 1080p Low.

Q: What frame rates can be expected at 2560x1440 with Medium settings?

A: The average FPS is 195, with a minimum of 166 and a maximum of 225. All recorded values exceed the 60 FPS threshold.

Q: How does this combination rank among all tested PC configurations for Minecraft?

A: It ranks 2494 out of 3710 tested combinations, placing it in the upper portion of the database.

The Verdict

The recorded data clearly answers whether this PC can run Minecraft. At 1920x1080, every preset clears 60 FPS. The lowest average among all presets at this resolution is 153 FPS on Ultra, so users have complete freedom to enable the highest quality settings. At 2560x1440, the same is true: Ultra averages 97 FPS, and all other presets are well above 60 FPS. At 3840x2160, the verdict is more nuanced. High settings average 81 FPS, which is playable. Medium averages 102 FPS, and Low averages 129 FPS. Ultra, however, averages only 51 FPS, which falls below the 60 FPS threshold. The verdict by resolution is therefore: 1080p and 1440p are fully playable at all presets, while 4K is playable up to High settings but not Ultra. The playable settings at 4K are Low, Medium, and High, with High being the best choice for visual quality while maintaining an average of 81 FPS.

For users with high refresh rate monitors at 1080p, the headroom is substantial. Even the most demanding preset delivers 153 FPS on average, which comfortably exceeds 144 Hz displays. At 1440p, the 97 FPS average on Ultra is suitable for 60 Hz to 100 Hz displays, and dropping to High raises the average to 155 FPS for higher refresh rates. At 4K, users should target High for a balanced experience, or Medium if they prefer a larger safety margin, since the minimum recorded FPS at Medium is 87.

CPU and GPU Roles

The division of labor between the Intel Core i5-10400F and the AMD Radeon RX 7600 shifts noticeably across resolutions. At 1920x1080, the frame rates are extraordinarily high, with the Low preset reaching 391 FPS. Such high frame rates indicate that the CPU is capable of feeding the GPU rapidly, but the GPU still has enough headroom to render frames quickly. The i5-10400F's 6 cores and 12 threads, with a boost clock of 4.30 GHz, appear sufficient to avoid bottlenecking at these frame rates. The single-thread benchmark score of 2541 on Passmark and the Cinebench R23 single-core score of 1451 support this interpretation, as Minecraft tends to rely heavily on single-thread performance.

At 2560x1440, the frame rates remain high but scale down consistently. The transition from 1080p to 1440p increases the pixel count by roughly 78%, and the recorded averages reflect a corresponding load increase. The CPU's role becomes relatively less important as the GPU takes on more work. The fact that Ultra still averages 97 FPS at 1440p suggests the GPU is not yet saturated, but the scaling from Low to Ultra shows a 150 FPS drop, indicating that the GPU is the dominant factor in quality scaling.

At 3840x2160, the GPU is clearly the limiting component. The pixel count quadruples compared to 1080p, and the Ultra preset drops to 51 FPS. This is the only configuration where the system fails to maintain 60 FPS. The CPU's contribution is unlikely to be the issue, given its strong performance at lower resolutions. The GPU's 8 GB of memory and 288.0 GB/s bandwidth are being pushed hard at 4K, especially with Ultra settings. The recorded data shows that the gap between High and Ultra at 4K is 30 FPS, which is the largest single-step drop in the entire dataset. This indicates that Ultra settings at 4K introduce a workload that the RX 7600 cannot sustain at playable levels.

The broader pattern is clear: at 1080p and 1440p, the combination is balanced, with the GPU handling quality scaling while the CPU provides enough throughput for very high frame rates. At 4K, the GPU becomes the bottleneck, and users must reduce settings to maintain playability. The CPU's percentile rank of 68 among all CPUs and the GPU's rank of 57 among all GPUs suggest that neither component is exceptionally high-end, but they are well matched for this game at most settings.

How This Combo Ranks

The Intel Core i5-10400F and AMD Radeon RX 7600 combination ranks 2494 out of 3710 tested configurations in the database for Minecraft. This places it in the upper third of all tested combos, roughly at the 67th percentile. The rank reflects the combination's ability to handle the game at high frame rates across most resolutions and presets. The only significant weakness is 4K Ultra, which is a demanding scenario that many configurations would struggle with. The CPU's percentile of 68 and the GPU's percentile of 57 are broadly consistent with the combo's overall rank, though the combo performs slightly better than the GPU's percentile alone might suggest. This is likely because Minecraft is not an extremely demanding game, and the CPU's strong single-thread performance helps maintain high frame rates even when the GPU is not the limiting factor.

Given that 3710 combinations have been tested, a rank of 2494 means roughly 1216 configurations perform better and about 2493 perform worse. The combination is not at the top of the database, but it is far from the bottom. For a mainstream desktop CPU from 2020 paired with a mid-range GPU from 2023, this ranking is respectable. The data indicates that the combination delivers playable performance in the vast majority of scenarios, with only the most demanding 4K preset falling short.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 153 FPS. This is the recommended setting for 1080p, as it provides the highest visual quality while maintaining a frame rate that is more than double the playable threshold. Users with high refresh rate monitors could also consider High at 246 FPS or Medium at 309 FPS, but Ultra is the best balance of quality and performance.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is also Ultra, with an average of 97 FPS. This is comfortably above the threshold and offers the best visual experience at this resolution. The margin is sufficient for most users, though those who prefer a larger buffer for demanding scenes could drop to High at 155 FPS.

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 81 FPS. The minimum recorded value for Medium is 87 FPS, so High should remain playable in most scenes, but the margin is narrower than at lower resolutions. Users who want a safer frame rate buffer should choose Medium at 102 FPS, while those who prioritize visual quality can use High. Ultra is not recommended at 4K, as it averages only 51 FPS. The best settings per resolution are therefore Ultra at 1080p, Ultra at 1440p, and High at 4K. This combination of settings maximizes visual quality while keeping the average frame rate at or above 60 FPS in every scenario.