Instant compatibility check with FPS benchmarks and optimization tips
Minecraft
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 82 | 131 | 165 | 209 |
| 1440p QHD | 157 | 251 | 316 | 400 |
| 1080p Full HD | 249 | 398 | 501 | 633 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Minecraft on Your System
The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 3080 Ti delivers exceptional performance in Minecraft, with measured frame rates far exceeding the 60 FPS playable threshold at every resolution and preset combination tested. Across all three resolutions — 1920x1080, 2560x1440, and 3840x2160 — the benchmark data shows average frame rates ranging from a low of 82 FPS at 4K Ultra to a high of 633 FPS at 1080p Low, indicating that this combination is not merely playable but massively overqualified for the game’s demands. The RTX 3080 Ti, which ranks in the 83rd percentile among all GPUs, dominates the rendering workload, while the Core i3-12100F, sitting in the 68th percentile, keeps pace without becoming the limiting factor in most scenarios. This analysis breaks down the measured performance, compares nearby hardware alternatives, evaluates optimal settings, and examines the roles each component plays across resolutions.
Measured FPS Breakdown
The measured FPS data for Minecraft with this CPU and GPU combination spans three resolutions and four quality presets, with the average frame rate serving as the primary metric alongside minimum and maximum figures where recorded. At 1920x1080, the lowest resolution tested, the performance is exceptional across the board. The Low preset produces an average of 633 FPS, which is the highest recorded number in the entire dataset. Medium settings deliver an average of 501 FPS, with a minimum of 426 FPS and a maximum of 577 FPS, showing a tight frame pacing band that indicates consistent performance under load. High settings at 1080p yield 398 FPS average, while Ultra still maintains a robust 249 FPS average. The jump from Ultra to Low represents a 384 FPS difference, or roughly 2.5 times the frame rate, which highlights how much headroom the Low preset offers in this resolution.
Moving to 2560x1440, the same pattern continues but with lower absolute numbers, as expected from the increased pixel count. Low settings produce a 400 FPS average, which is still far above any display refresh rate commonly in use. Medium at 1440p averages 316 FPS, with a minimum of 269 FPS and a maximum of 364 FPS, again demonstrating stable frame delivery. High hits 251 FPS average, and Ultra drops to 157 FPS average. The scaling from 1080p to 1440p shows a reduction of roughly 37% at Low (from 633 down to 400 FPS), 37% at Medium (501 to 316), 37% at High (398 to 251), and 37% at Ultra (249 to 157). This consistent 63% retention ratio across presets indicates that resolution scaling is linear for this workload, with the GPU being the primary driver of the frame rate decline as pixel count grows.
At 3840x2160, the highest resolution tested, performance remains well above playable thresholds but shows the most pronounced effects of the resolution increase. Low settings still achieve a 209 FPS average, which is more than triple the 60 FPS threshold. Medium at 4K averages 165 FPS, with a minimum of 141 FPS and a maximum of 190 FPS, meaning even the worst-case minimum frame rate stays comfortably above 120 FPS. High drops to 131 FPS average, while Ultra falls to 82 FPS average — still above the 60 FPS playable mark but with far less headroom than other presets. The data shows that Ultra at 4K is the only configuration where average FPS falls below 100, and even then, it remains 22 FPS above the playable threshold. The scaling from 1440p to 4K is less severe than from 1080p to 1440p, as the 4K Ultra average of 82 FPS represents a 48% drop from the 1440p Ultra average of 157 FPS, which is consistent with the pixel count difference but mitigated by other factors.
Minimum and maximum FPS data is only available for Medium settings across all three resolutions, as shown in the measured results. At 1080p Medium, the min of 426 FPS and max of 577 FPS create a range of 151 FPS, which is 30% of the average, indicating slight variance but no stutter issues. At 1440p Medium, the min of 269 FPS and max of 364 FPS spans 95 FPS, which is also about 30% of the average of 316 FPS. At 4K Medium, the min of 141 FPS and max of 190 FPS spans 49 FPS, again roughly 30% of the average of 165 FPS. This consistent 30% variance pattern across Medium suggests that the frame pacing is stable regardless of resolution, with the hardware maintaining proportional headroom.
Similar Performance Alternatives
The nearestRivals data provides context for how this specific CPU and GPU compare to other hardware. For the Intel Core i3-12100F CPU, the closest rivals by average benchmark score are the Intel Core 3 N355, the Intel Core i5-9500, the Intel Core 5 120UL, and the Intel Core i7-1250U. The Intel Core 3 N355 has an average score of 13492, which is exactly 0% different from the i3-12100F’s score of 13494, making it effectively identical in synthetic performance. The Intel Core i5-9500 scores 13452, a 0.3% lower delta, meaning it trails by a negligible margin that would not produce any observable difference in Minecraft frame rates. The Intel Core 5 120UL scores 13594, a 0.7% higher delta, slightly outperforming the i3-12100F in raw benchmarks, but again this is within noise for most gaming workloads. The Intel Core i7-1250U has a score of 13351, a 1.1% lower delta, which is the largest difference among the listed rivals but still under 2% in performance gap.
For the GPU, the NVIDIA GeForce RTX 3080 Ti’s nearest rivals include the AMD Radeon Pro 5300, the NVIDIA Tesla M40 24 GB, the NVIDIA Tesla M40 (8 GB), and the NVIDIA GeForce RTX 5070. The AMD Radeon Pro 5300 has an average score of 40870, which is 0.8% higher than the RTX 3080 Ti’s 41187 average. The NVIDIA Tesla M40 24 GB scores 41707, a 1.2% lower delta, while the Tesla M40 (non-24GB) scores 41897, a 1.7% lower delta, meaning both are slightly slower. The NVIDIA GeForce RTX 5070 scores 40377, a 2.0% higher delta, making it the closest competitor but still within a narrow margin. In practical terms, any of these GPUs would deliver Minecraft frame rates within a few percentage points of the RTX 3080 Ti’s measured results, so users with those cards could expect similar performance profiles. However, the RTX 3080 Ti’s 83rd percentile ranking among all GPUs underscores that these rivals are themselves high-end parts, not midrange alternatives.
Best Settings per Resolution
At 1920x1080, the most demanding preset that achieves an average FPS above 60 is Ultra, which produces an average of 249 FPS. This is the highest quality setting available in the test set, and it clears the 60 FPS threshold by 189 FPS, leaving enormous headroom. The data shows that all four presets — Low, Medium, High, and Ultra — are playable at 1080p, as the lowest average among them (Ultra at 249 FPS) is still four times the playability threshold. The recommendation for 1080p is Ultra, since there is no performance reason to sacrifice visual quality.
At 2560x1440, the same conclusion applies: Ultra is the best playable preset, with an average of 157 FPS. The minimum frame rate for Ultra at this resolution is not recorded, but the average is 97 FPS above the 60 FPS threshold. All presets at 1440p remain well above playable, with Low at 400 FPS, Medium at 316 FPS, and High at 251 FPS, so the choice of Ultra is straightforward from a performance standpoint.
At 3840x2160, the situation remains playable even at the highest settings. The Ultra preset averages 82 FPS, which is 22 FPS above the 60 FPS threshold. Medium at 4K averages 165 FPS, Low at 209 FPS, and High at 131 FPS, but the best settings that stays above 60 FPS is Ultra at 82 FPS. This is the only resolution where the FPS headroom narrows noticeably, yet the hardware still delivers playable performance at maximum quality settings. The verdict for 4K is that Ultra is the best choice, as it sacrifices no playability.
The Verdict
The verdict from the measured data is unambiguous: this computer can run Minecraft at 60 FPS or higher at every resolution and preset tested. The verdictByResolution field confirms that at 3840x2160, all four settings (Low, Medium, High, and Ultra) are playable, with the best settings being Ultra at an average of 82 FPS. At 2560x1440, again all four settings are playable, with Ultra averaging 157 FPS. At 1920x1080, the same pattern holds, with Ultra averaging 249 FPS. There is no configuration in the dataset that dips below the 60 FPS playability threshold, even at the most demanding resolution and preset combination. The minimum FPS recorded anywhere is 141 FPS, which occurs at 4K Medium, and that is still more than double the playable threshold. The maximum recorded FPS is 577 FPS at 1080p Medium, showing the extreme performance ceiling. This combination is not just playable — it is overkill for Minecraft, as the GPU’s 83rd percentile ranking and the CPU’s 68th percentile ranking combine to produce frame rates that most displays cannot even refresh. In short, users can enable any preset at any resolution and expect smooth gameplay.
FAQ
Q: What average FPS does this system achieve at 1080p Ultra settings?
A: The average FPS at 1920x1080 with Ultra settings is 249 FPS, which is well above the 60 FPS playability threshold.
Q: Is the 4K Ultra preset playable with this hardware?
A: Yes, the 3840x2160 Ultra preset averages 82 FPS, which is 22 FPS above the 60 FPS playable threshold, and the verdictByResolution lists Ultra as one of the playable settings at 4K.
Q: Which resolution shows the largest variance in frame rate for Medium settings?
A: At 1920x1080 Medium, the minimum FPS is 426 and the maximum is 577, a range of 151 FPS, which is the largest absolute range among all Medium presets. At 2560x1440 Medium, the range is 95 FPS (269 to 364), and at 3840x2160 Medium, the range is 49 FPS (141 to 190).
Q: How does the RTX 3080 Ti compare to its nearest rival GPU in terms of score?
A: The nearest rival is the NVIDIA GeForce RTX 5070 with a deltaPct of 2.0% higher score, while the AMD Radeon Pro 5300 is 0.8% higher, and the Tesla M40 24 GB is 1.2% lower.
Q: What is the playable threshold FPS and does this combo exceed it at every setting?
A: The playable threshold is 60 FPS, and the measured data shows that the average FPS at every resolution and preset exceeds this, with the lowest average being 82 FPS at 4K Ultra.
Q: At which resolution does the FPS drop below 100 FPS for any preset?
A: Only at 3840x2160 Ultra, where the average is 82 FPS, does the FPS fall below 100. All other presets across all resolutions average above 100 FPS, with 1440p Ultra at 157 FPS and 1080p Ultra at 249 FPS.
How This Combo Ranks
In the benchmark database, this exact combination of Intel Core i3-12100F and NVIDIA GeForce RTX 3080 Ti ranks 903rd out of 3710 tested combos for Minecraft. This puts it in the top 24% of all combinations in the database, which is consistent with the measured FPS data showing high performance in every scenario. The rank of 903 out of 3710 indicates that while there are many faster combinations (mostly pairing higher-end CPUs with even more powerful GPUs), this combo still sits in the upper quartile of results. The CPU’s 68th percentile ranking places it in the middle-to-upper range of all CPUs, while the GPU’s 83rd percentile ranking is higher, suggesting that the GPU is the stronger contributor to the combo rank. Since the game Minecraft is known for being draw-call and CPU-heavy in some scenarios, the relatively modest CPU rank might explain why this combo does not rank higher than 903rd, as the GPU alone cannot fully carry the load. The data shows that the combo outperforms the 60 FPS threshold by a wide margin, but the rank relative to other combos suggests that some pairings with faster CPUs achieve even higher frame rates.
CPU and GPU Roles
The benchmark data reveals that the GPU is the dominant factor in determining frame rates for this game, but the CPU’s role varies by resolution. At 1920x1080, the average FPS drops from 633 at Low to 249 at Ultra, a 61% reduction, which is primarily driven by GPU load, as lower resolutions put less stress on the GPU. Meanwhile, the CPU’s single-thread and multithread performance, as measured by its benchmarks such as 3dmark_single_thread score of 893 and passmark_single_thread score of 3444, are sufficient to sustain these high frame rates. At 1080p, the CPU is not the bottleneck, as the FPS is so high (over 600 FPS at Low) that any CPU limitation would be hidden by the massive GPU headroom.
At 2560x1440, the FPS scaling shows that the GPU becomes more prominent. The reduction from Low (400 FPS) to Ultra (157 FPS) is again 61%, but the absolute numbers are lower, indicating that the GPU is working harder. The CPU’s role remains constant, as the same CPU must feed the GPU with draw calls, but the data does not show any CPU-induced stalls since the minimum FPS at Medium (269 FPS) is still extremely high.
At 3840x2160, the GPU’s dominance becomes even clearer. The FPS at Ultra (82 FPS) is only 39% of the Low setting (209 FPS), which is a larger relative drop than 1440p, where Ultra was 39% of Low (157 vs 400). The 4K Ultra average of 82 FPS is the only configuration that approaches the 60 FPS threshold, and this is entirely attributable to the GPU’s pixel throughput limits. The RTX 3080 Ti’s memory bandwidth of 912.4 GB/s and pixel rate of 186.5 GPixel/s are the key specs that determine 4K performance, and they produce the 82 FPS result. The CPU’s role at 4K is diminished because the GPU is the bottleneck, but the CPU still meets the minimum requirements, as evidenced by the fact that the 4K Ultra is playable.
The scaling between resolutions shows that the performance drop from 1080p to 1440p is consistent at around 37% across all presets, and from 1440p to 4K is also around 37% for most presets, except Ultra which drops by 48%. This indicates that the GPU renders the same scene at higher pixel counts, and the CPU overhead per frame remains roughly constant, so the GPU is the scaling factor. The CPU benchmarks, such as the Cinebench R23 multi-core score of 11860 and the 3dMark 8 threads score of 4026, are more than adequate for the game’s CPU demands, which is why the CPU never becomes the limiting factor in any measured configuration. The conclusion is that in Minecraft, the GPU is the primary driver of FPS, with CPU influence limited to preventing bottlenecks at extremely high frame rates, and this combo shows no such CPU bottleneck.