Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Minecraft
Sandbox 2011

Minecraft

69%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
461 FPS
Ultra 1080p Measured
181 FPS

1440p (2K / QHD)

Low 1440p Measured
291 FPS
Ultra 1440p Measured
114 FPS

4K (Ultra HD)

Low 4K Measured
152 FPS
Ultra 4K Measured
60 FPS
3.4ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,554
Your CPU 27,578
Graphics Card
Required 26,954
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 60 96 121 152
1440p QHD 114 183 231 291
1080p Full HD 181 290 365 461

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 290
1920x1080 Low 461
1920x1080 Medium 365
1920x1080 Ultra 181
2560x1440 High 183
2560x1440 Low 291
2560x1440 Medium 231
2560x1440 Ultra 114
3840x2160 High 96
3840x2160 Low 152
3840x2160 Medium 121
3840x2160 Ultra 60

Performance Analysis: Minecraft on Your System

The AMD Ryzen 7 5700X paired with the NVIDIA GeForce RTX 4060 delivers exceptional performance in Minecraft, clearing the 60 FPS threshold at every preset and resolution tested, with the most demanding Ultra settings reaching 181 FPS at 1920x1080 and 60 FPS at 3840x2160. This combination ranks 1989th out of 3710 tested combos for this game, placing it in the upper half of all systems evaluated, though its raw scores suggest a setup that prioritizes consistency over extremes. The measured data indicates a system that never struggles with this sandbox title, even at 4K Ultra, making it a versatile choice for players who want maximum visual fidelity without compromising frame rates.

Measured FPS Breakdown

At 1920x1080, the AMD Ryzen 7 5700X and NVIDIA GeForce RTX 4060 produce staggering frame rates across all four presets. The Low preset delivers an average of 461 FPS, which is the highest average recorded for this combo in any configuration. Moving to Medium, the average drops to 365 FPS, with minimum and maximum values of 311 and 420 FPS respectively, showing tight frame pacing even under load. The High preset yields an average of 290 FPS, while the Ultra preset, which represents the most graphically intensive settings, still maintains an average of 181 FPS. The gap between Low and Ultra at this resolution is 280 FPS, indicating that the GPU and CPU have substantial headroom to absorb the increased workload from higher-quality textures, shadows, and draw distances without approaching the 60 FPS playability threshold.

At 2560x1440, the same pattern emerges but with proportionally lower numbers due to the increased pixel count. The Low preset averages 291 FPS, which is still far beyond what most displays can refresh. Medium produces an average of 231 FPS with minimum and maximum readings of 196 and 265 FPS, respectively, demonstrating stable performance during complex scene transitions. High settings drop the average to 183 FPS, while Ultra remains highly playable at 114 FPS. The delta between Low and Ultra here is 177 FPS, smaller than at 1080p, suggesting that the resolution increase begins to shift some of the load from the CPU toward the GPU, though neither component becomes a bottleneck at these frame rates.

At 3840x2160, also known as 4K UHD, the performance remains strong but shows the expected scaling curve. The Low preset averages 152 FPS, which is still comfortably above 60 FPS and suitable for high-refresh-rate 4K monitors. Medium settings produce an average of 121 FPS with minimum and maximum values of 102 and 139 FPS, respectively, providing a smooth experience even during intense moments. High drops to 96 FPS average, and Ultra, the most demanding preset, lands exactly at 60 FPS average, which meets the playable threshold but leaves no headroom for frame drops. The range from Low to Ultra at 4K is 92 FPS, the smallest delta among the three resolutions, confirming that the GPU becomes increasingly important as pixel count rises.

The min and max FPS data, where recorded, provide additional context. For Medium settings at all three resolutions, the spread between minimum and maximum is relatively narrow: 109 FPS at 1080p, 69 FPS at 1440p, and 37 FPS at 4K. This indicates that frame pacing remains consistent even when the scene complexity varies, with no sudden stutters or drops below the playable threshold. The absence of min/max data for Low, High, and Ultra presets means those runs were likely captured without those metrics, but the average values alone demonstrate that all presets at all resolutions deliver at least 60 FPS.

Best Settings per Resolution

For 1920x1080, the best setting that stays at or above 60 FPS is Ultra, which achieves an average of 181 FPS. This is the most demanding preset available, and it still provides over three times the playable threshold, meaning players can enable every visual enhancement without worrying about performance degradation. The data shows that even with maximum settings, the system has substantial reserve capacity, so there is no reason to compromise on quality at this resolution.

At 2560x1440, the best setting is also Ultra, with an average of 114 FPS. This is nearly double the 60 FPS threshold, offering a comfortable margin for demanding scenes or multiplayer environments where many players and entities are present. The jump from Ultra at 1440p to Ultra at 1080p is 67 FPS, reflecting the additional GPU workload from rendering more pixels, but the system still performs admirably.

For 3840x2160, the best setting remains Ultra, but the average FPS drops to exactly 60. This meets the playable threshold precisely, making it the boundary case for this combo. While 60 FPS is playable, the lack of headroom means that any significant in-game event—such as exploring a loaded chunk with many entities or enabling shaders—could push frame rates below the threshold. The data suggests that Ultra at 4K is viable but not ideal for players who demand consistent performance above 60 FPS; Medium at 121 FPS or High at 96 FPS would offer more safety margin.

Across all resolutions, the verdict data confirms that all four presets—Low, Medium, High, and Ultra—are considered playable, with the best setting being Ultra in every case. This uniformity reflects the game’s relatively modest hardware requirements compared to modern AAA titles, allowing this mid-range combo to max out settings without issue except at the highest resolution.

CPU and GPU Roles

The scaling between resolutions and presets reveals how the AMD Ryzen 7 5700X and NVIDIA GeForce RTX 4060 share the workload in Minecraft. At 1920x1080, the CPU’s role is more pronounced because the GPU has less pixel work to do, allowing the processor’s 8 cores and 16 threads to drive high frame rates. The Ryzen 7 5700X scores 13,184 in Cinebench R23 multi-core and 1,499 in single-core, with a PassMark single-thread score of 3,385, indicating strong per-core performance that benefits Minecraft’s largely single-threaded game logic. The jump from Low (461 FPS) to Ultra (181 FPS) at 1080p is a 60.8% reduction, which is primarily due to increased GPU load from higher-quality rendering, but the CPU still feeds frames fast enough to avoid bottlenecking.

As resolution increases to 2560x1440, the GPU begins to take on more responsibility. The average FPS at Low drops from 461 to 291, a 36.9% decrease, while Ultra drops from 181 to 114, a 37.0% decrease. This proportional scaling indicates that the RTX 4060, with its 3,072 shading units and 8 GB of GDDR6 memory on a 128-bit bus delivering 272.0 GB/s bandwidth, is handling the extra pixel workload efficiently. The CPU’s influence remains relevant, as the Ryzen 7 5700X’s 32 MB of shared L3 cache helps maintain consistent frame times, but the GPU becomes the limiting factor at higher settings.

At 3840x2160, the GPU’s dominance becomes clear. Low settings average 152 FPS, which is 52.2% lower than at 1080p, and Ultra averages 60 FPS, which is 66.9% lower than at 1080p. This steeper decline at 4K shows that the RTX 4060 is working near its limits for this game at Ultra settings, while the CPU still has headroom—its benchmark scores, such as 26,612 in PassMark multithread and 5,768 in 3DMark 8-thread, indicate it could support even higher frame rates if the GPU could render faster. The measured data shows that the CPU-to-GPU balance shifts from CPU-leaning at 1080p to GPU-bound at 4K, which is typical for a game like Minecraft that relies on draw calls and chunk updates but scales primarily with pixel count for rendering.

The preset scaling further clarifies this dynamic. At 1080p, the difference between Low and Ultra is 280 FPS, while at 1440p it is 177 FPS, and at 4K it is 92 FPS. This shrinking gap indicates that as resolution rises, the GPU’s rendering cost per frame increases, making the relative impact of preset changes smaller. The CPU’s role in determining maximum FPS is most evident at Low settings, where the 461 FPS at 1080p versus 152 FPS at 4K shows a 3.03x difference, while at Ultra the difference is 3.02x, suggesting that neither component alone dominates across all presets.

FAQ

Q: Can this PC run Minecraft at 4K Ultra settings?

A: Yes, the AMD Ryzen 7 5700X and NVIDIA GeForce RTX 4060 achieve an average of 60 FPS at 3840x2160 with Ultra settings, which meets the playable threshold exactly. However, this leaves no margin for frame drops, so medium settings at 121 FPS or high settings at 96 FPS are safer for consistent performance.

Q: What is the highest FPS this combo delivers in Minecraft?

A: The highest average FPS recorded is 461, achieved at 1920x1080 with Low settings. This is the maximum value in the measured data, and it demonstrates that the system can produce extremely high frame rates when graphical demands are minimized.

Q: How does the RTX 4060 compare to its nearest rivals in terms of average benchmark score?

A: The RTX 4060 has an average benchmark score of 17,639, which places it just 0.2% behind the AMD Radeon HD 7790 (17,666), 0.3% ahead of the AMD Radeon 780M (17,588), 0.5% ahead of the AMD Radeon Pro 560 (17,551), and 0.7% ahead of the AMD Radeon Pro 460 (17,509). These are marginal differences, indicating similar raw performance levels.

Q: Is the Ryzen 7 5700X a balanced match for the RTX 4060 in this game?

A: Yes, the data shows that at 1080p and 1440p, the CPU and GPU work well together, with the CPU able to feed high frame rates and the GPU rendering them. At 4K Ultra, the GPU becomes the limiting factor, but the CPU’s performance, such as its 79th percentile ranking among all CPUs, ensures it does not bottleneck the system.

Q: What frame rates can I expect at 2560x1440 with medium settings?

A: At 2560x1440 with Medium settings, the average FPS is 231, with minimum and maximum values of 196 and 265 FPS, respectively. This is well above the 60 FPS threshold and provides a smooth experience for most displays.

Q: How does this combo rank among all tested systems for Minecraft?

A: This combo ranks 1989th out of 3710 tested combos for Minecraft, placing it in the 53.6th percentile (calculated from rank and total combos). This means slightly more than half of tested systems perform better, but the measured FPS data shows that this ranking does not reflect any playability issues, as all presets and resolutions exceed 60 FPS.

How This Combo Ranks

The comboRankInGame for the AMD Ryzen 7 5700X and NVIDIA GeForce RTX 4060 is 1989 out of 3710 tested combos, which places it just past the midpoint of all systems evaluated for Minecraft. This ranking is notable because the measured FPS data shows exceptional performance—every preset at every resolution clears 60 FPS—yet the rank suggests that many other combos achieve even higher frame rates, likely due to more powerful GPUs or CPUs that push into the hundreds of FPS at lower resolutions. The RTX 4060’s percentile of 61 among all GPUs and the Ryzen 7 5700X’s percentile of 79 among all CPUs indicate that both components sit above average, but Minecraft’s relatively low hardware demands mean that even top-tier systems can produce massive frame rates, skewing the rank distribution.

The GPU’s nearest rivals provide context for its performance. The RTX 4060’s average benchmark score of 17,639 is nearly identical to the AMD Radeon HD 7790 (17,666), which is a much older card, and the AMD Radeon 780M (17,588), an integrated graphics solution. This suggests that the RTX 4060’s raw compute is not exceptionally high, but its modern architecture and features, such as 24 RT cores and 96 tensor cores, may help in games that leverage those capabilities. In Minecraft, which relies more on raw fill rate and shader performance, the RTX 4060’s 118.1 GPixel/s pixel rate and 236.2 GTexel/s texture rate are sufficient for the measured FPS.

The CPU’s nearest rivals show a tight cluster of performance. The Ryzen 7 5700X’s average benchmark score of 27,578 is exactly matched by the Intel Core i5-12600K (27,578), with a 0% delta, and it sits 0.2% ahead of the AMD Ryzen 7 5800 (27,535), 0.2% behind the AMD Ryzen 5 7600X (27,636), and 0.3% ahead of the Intel Core Ultra 5 125H (27,507). This means the CPU is in a dead heat with several rivals, and any differences in Minecraft performance would be negligible. The measured FPS data confirms this, as the system delivers high frame rates across all resolutions, indicating that the CPU is not a limiting factor.

The rank of 1989 out of 3710 also implies that the combo sits in a crowded field. Many systems with newer GPUs, such as those from the RTX 40-series or Radeon RX 7000-series, would likely produce higher FPS in Minecraft, especially at 1080p where CPU and GPU headroom are abundant. However, for the specific goal of playing at 60 FPS or above, this combo is more than adequate, and the rank should be interpreted as a measure of raw speed rather than playability.

The Verdict

The AMD Ryzen 7 5700X and NVIDIA GeForce RTX 4060 can unequivocally run Minecraft, and the verdict data confirms that all tested resolutions and presets are playable. At 1920x1080, the best setting is Ultra with an average of 181 FPS, which is nearly three times the playable threshold of 60 FPS, providing a smooth and responsive experience with all graphical features enabled. At 2560x1440, the best setting remains Ultra with an average of 114 FPS, still offering a comfortable margin above the threshold and suitable for high-refresh-rate monitors. At 3840x2160, the best setting is Ultra with an average of exactly 60 FPS, which meets the playability requirement but is the boundary case; players who want more headroom should consider High at 96 FPS or Medium at 121 FPS.

The data shows that this combo is best suited for 1080p and 1440p gaming, where it delivers outstanding performance that far exceeds typical display refresh rates. At 4K, it remains playable at maximum settings, but the lack of headroom means that performance could dip below 60 FPS in demanding scenarios, such as when exploring heavily loaded areas or using mods that increase draw distance. The CPU’s strong single-thread performance, evidenced by its 1,499 Cinebench R23 single-core score and 3,385 PassMark single-thread score, helps maintain high frame rates in Minecraft’s CPU-bound aspects, while the GPU’s 8 GB of VRAM and modern architecture handle the rendering workload.

For players with a 1080p or 1440p monitor, this system is overkill for Minecraft, offering frame rates that are limited only by the display’s refresh rate. For 4K players, it is a viable option at Ultra settings, but those who prefer a consistent 60 FPS minimum might opt for High settings to gain additional stability. Overall, the verdict is clear: this combo runs Minecraft at playable frame rates across all settings and resolutions, with the strongest performance at lower resolutions and a capable, if not abundant, performance at 4K Ultra.