Instant compatibility check with FPS benchmarks and optimization tips
Minecraft
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 82 | 132 | 166 | 210 |
| 1440p QHD | 158 | 253 | 318 | 402 |
| 1080p Full HD | 250 | 400 | 504 | 636 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Minecraft on Your System
The AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 4070 delivers exceptionally high frame rates in Minecraft across all tested resolutions, with the data showing that this combination not only clears the 60 FPS playability threshold at every preset but does so with substantial headroom, making it a formidable setup for this sandbox title.
FAQ
Q: What is the highest graphical preset that maintains at least 60 FPS at 4K resolution?
A: At 3840x2160, the Ultra preset runs at an average of 82 FPS, which is the most demanding setting that stays above the 60 FPS threshold. The High preset averages 132 FPS, Medium averages 166 FPS, and Low averages 210 FPS, all also exceeding the playability mark.
Q: How does the combo’s overall performance rank among all tested systems?
A: This CPU and GPU combination ranks 806 out of 3710 tested combos for Minecraft, placing it in the top percentile of systems evaluated for this game.
Q: What is the single-threaded performance of the AMD Ryzen 5 9600X?
A: The CPU scores 2183.5 in Cinebench R23 single-core and 1253 in 3DMark single-thread tests. Its PassMark single-thread score is 4570, and it achieves 2923 in Geekbench single-core benchmarks.
Q: What is the average benchmark score for the NVIDIA GeForce RTX 4070?
A: The GPU has an average benchmark score of 37648, with a PassMark G3D score of 26927 and a Geekbench Vulkan score of 174152. It ranks in the 81st percentile among all GPUs.
Q: Does the CPU or GPU have a higher percentile ranking relative to their respective categories?
A: Both components sit at the 81st percentile within their categories. The CPU’s average benchmark score is 29713, while the GPU’s is 37648, indicating both are strong performers relative to their peers.
Q: What is the minimum and maximum frame rate observed at 1440p Medium settings?
A: At 2560x1440 with Medium settings, the average FPS is 318, with a minimum of 270 FPS and a maximum of 366 FPS, showing excellent frame time consistency.
Best Settings per Resolution
For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which delivers an average of 250 FPS. This represents the highest visual quality option available in the test data, and the frame rate is more than four times the playability threshold. Even at this maximum preset, the system has enormous headroom, suggesting that users could enable additional mods or shaders without dropping below the playable mark.
At 2560x1440, the Ultra preset also remains the best choice, achieving an average of 158 FPS. This is a significant drop from the 1080p Ultra result of 250 FPS, but still far above the 60 FPS requirement. The scaling from 1080p to 1440p shows a 36.8% reduction in frame rate at Ultra settings, which is expected given the increased pixel count. The High preset at 1440p runs at 253 FPS, while Medium averages 318 FPS and Low reaches 402 FPS. All options comfortably exceed the playability threshold, but the data indicates that Ultra is the only preset a player would need to consider for a fully immersive experience.
For 3840x2160, the Ultra preset remains the most demanding option that stays above 60 FPS, averaging 82 FPS. This is the tightest margin across all resolutions, with the system falling to 82 FPS at the highest settings. The High preset at 4K runs at 132 FPS, Medium at 166 FPS, and Low at 210 FPS. While Ultra at 4K is playable, the 82 FPS average leaves less room for frame rate fluctuations compared to lower resolutions. Players seeking absolute smoothness at 4K might prefer the High preset at 132 FPS, but the data confirms Ultra is technically viable.
The pattern across all three resolutions is consistent: the Ultra preset always clears the 60 FPS threshold, and the frame rates are substantially higher than the minimum requirement. The biggest performance gap occurs between Low and Ultra settings, with 4K showing a 128 FPS difference between these extremes, while 1080p shows a 386 FPS difference. This suggests the GPU becomes more of a limiting factor at higher resolutions, but even at 4K Ultra, the system performs admirably.
CPU and GPU Roles
The data reveals that the GPU becomes progressively more influential as resolution increases, while the CPU maintains a significant role at lower resolutions. At 1920x1080, the frame rates are extraordinarily high across all presets—Low averages 636 FPS, Medium 504 FPS, High 400 FPS, and Ultra 250 FPS. These numbers suggest that at 1080p, the CPU’s single-thread performance is critical for sustaining such high frame rates. The Ryzen 5 9600X, with its Cinebench R23 single-core score of 2183.5 and 3DMark single-thread score of 1253, provides the necessary processing power to feed the GPU at these extreme frame rates. The scaling from Ultra to Low at 1080p shows a 154% increase in FPS, indicating that the GPU is doing most of the work when settings are reduced, but the CPU still needs to keep up with the resulting frame generation.
At 2560x1440, the GPU’s role becomes more pronounced. The frame rates remain high but show a clear reduction compared to 1080p: Low drops from 636 to 402 FPS, Medium from 504 to 318 FPS, High from 400 to 253 FPS, and Ultra from 250 to 158 FPS. The percentage drop from 1080p to 1440p is relatively uniform across presets, ranging from 36.8% for Ultra to 37.7% for Medium. This uniform scaling indicates that the GPU is now the primary bottleneck, as the additional pixels require more shading and texture work. The CPU’s 3DMark 16-thread score of 7585 and PassMark multithread score of 30027 are sufficient to avoid becoming a limiting factor at this resolution.
At 3840x2160, the GPU dominance becomes even clearer. The frame rates drop more dramatically: Low falls to 210 FPS, Medium to 166 FPS, High to 132 FPS, and Ultra to 82 FPS. The reduction from 1440p to 4K is substantial—Ultra drops by 48.1%, while Low drops by 47.8%. This near-linear scaling with pixel count confirms that the RTX 4070, with its 29.15 TFLOPS FP32 performance and 504.2 GB/s memory bandwidth, is the determining factor at 4K. The CPU’s performance, including its Geekbench multicore score of 14438, remains more than adequate, as the frame rates are still well above the 60 FPS threshold even at the most demanding settings.
Comparing the scaling between presets at each resolution provides additional insight. At 4K, the difference between Low and Ultra is 128 FPS, representing a 61% reduction in performance. At 1440p, that same comparison shows a 244 FPS difference, a 60.7% reduction. At 1080p, the gap widens to 386 FPS, a 60.7% reduction. The consistency of this percentage across resolutions suggests that the relative impact of settings is similar, but the absolute frame rates are governed by the resolution-dependent GPU load. For Minecraft specifically, the CPU’s strong single-thread performance is beneficial at lower resolutions where high FPS is achievable, but the GPU takes over as the primary constraint when moving to higher resolutions.
Similar Performance Alternatives
The CPU’s nearest rivals, based on average benchmark scores, include the AMD Ryzen 7 PRO 5755GE, which scores 29656, a mere 0.2% difference from the Ryzen 5 9600X’s 29713. This means systems using that CPU would deliver virtually identical performance in Minecraft, assuming the same GPU and settings. The AMD Ryzen 7 7840H scores 29868, which is 0.5% higher, while the AMD Ryzen 7 5800XT scores 29879, 0.6% higher. The AMD Ryzen 7 8845HS scores 29955, 0.8% higher than the 9600X. These deltas are all within 1%, so users upgrading from or comparing to these CPUs would see no meaningful difference in Minecraft frame rates.
For the GPU, the NVIDIA Tesla P4 scores 37628, a 0.1% difference from the RTX 4070’s 37648, making it essentially equivalent in average benchmark performance. The AMD Radeon RX Vega 56 scores 37507, which is 0.4% lower, while the NVIDIA GeForce RTX 4080 Mobile scores 38135, 1.3% higher. The AMD Radeon PRO W6400 scores 37157, 1.3% lower. These small deltas indicate that the RTX 4070’s performance profile is closely matched by these alternatives, and in Minecraft specifically, the frame rates would be nearly indistinguishable.
When considering a full system with both components, the cumulative effect of these small deltas should be considered. A CPU that is 0.8% faster paired with a GPU that is 1.3% slower could result in slightly different performance characteristics depending on the resolution. At 1080p, where the CPU matters more, a faster CPU like the Ryzen 7 8845HS might provide a marginal advantage in the highest FPS scenarios. At 4K, where the GPU dominates, the RTX 4080 Mobile’s 1.3% higher score could push frame rates slightly higher, though the difference would likely be within the margin of error for real-world testing.
The data shows that these rival components occupy a narrow performance band around the Ryzen 5 9600X and RTX 4070. None of the alternatives deviate by more than 1.3% in either direction, so users with these components would experience essentially the same Minecraft performance. This is particularly relevant for those considering a pre-built system with slightly different hardware, as the gaming experience would be nearly identical.
How This Combo Ranks
The AMD Ryzen 5 9600X and NVIDIA GeForce RTX 4070 combination ranks 806 out of 3710 tested combos for Minecraft. This places the system in the top 21.7% of all configurations tested, which is a strong showing for a mainstream desktop setup. The ranking reflects the balance between the CPU’s high single-thread performance and the GPU’s substantial rasterization capabilities, both of which are important for Minecraft’s rendering workload.
To contextualize this rank, consider that there are 3710 total combos in the database. A rank of 806 means that 2904 combinations performed worse, while 805 performed better. The systems ranking higher likely include more powerful GPUs like the RTX 4080 or 4090, or CPUs with even higher single-thread scores. However, the fact that this combo still ranks in the top quarter of all tested systems indicates that it is a capable configuration for Minecraft.
The rank also reflects the game’s specific requirements. Minecraft’s rendering is primarily single-threaded on the CPU side, as evidenced by the game’s age and the importance of single-core performance. The Ryzen 5 9600X’s 3DMark single-thread score of 1253 and PassMark single-thread score of 4570 are strong, but not the absolute highest available. The GPU’s 81st percentile ranking among all GPUs further supports the system’s overall position. At 4K Ultra, where the GPU is the main bottleneck, the 82 FPS result puts this combo well ahead of many systems with older or lower-tier GPUs.
The rank of 806 also suggests that while this system is not at the absolute state-of-the-art, it provides a substantial performance buffer for Minecraft. The lowest average FPS recorded across all resolutions and presets is 82 FPS at 4K Ultra, which is still 22 FPS above the playability threshold. This means the system would remain playable even with additional mods, shaders, or background tasks that could reduce frame rates.
The Verdict
The data unequivocally shows that the AMD Ryzen 5 9600X and NVIDIA GeForce RTX 4070 can run Minecraft at every resolution and preset tested, with all configurations exceeding the 60 FPS playability threshold. At 1920x1080, the Ultra preset runs at 250 FPS, providing a highly responsive experience ideal for competitive play or high-refresh-rate monitors. At 2560x1440, Ultra delivers 158 FPS, which is still far above the threshold and suitable for most gaming displays. At 3840x2160, Ultra averages 82 FPS, which is playable but with less headroom than lower resolutions.
The verdict by resolution confirms that all four settings—Low, Medium, High, and Ultra—are playable at every resolution. This is an unusual outcome, as many systems struggle to maintain playable frame rates at 4K with the highest settings. The best settings per resolution are Ultra in all cases, with average FPS of 250 at 1080p, 158 at 1440p, and 82 at 4K. The system’s rank of 806 out of 3710 combos places it in a strong position, and the component-level benchmarks support this conclusion.
For players with 1080p or 1440p displays, this system offers exceptional performance that would easily handle modded Minecraft or shader packs, which typically reduce frame rates significantly. Even at 4K, the Ultra preset’s 82 FPS average provides a smooth experience, though players who prioritize frame rate stability might opt for High at 132 FPS. Overall, this combination delivers far more performance than Minecraft requires, making it a reliable choice for this game and likely for future sandbox titles with similar requirements.