Instant compatibility check with FPS benchmarks and optimization tips
Minecraft
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 127 | 204 | 257 | 324 |
| 1440p QHD | 244 | 382 | 415 | 452 |
| 1080p Full HD | 371 | 446 | 484 | 527 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Minecraft on Your System
This combo, pairing an AMD Ryzen 5 5600F with an NVIDIA GeForce RTX 5090 D, is extreme in its asymmetry but delivers overwhelming performance in Minecraft. The data shows the combination ranks 307th out of 3710 tested combos for this game, placing it in the top 8.3% of all tested systems. That rank is heavily influenced by the GPU, which sits in the 92nd percentile of all GPUs, while the CPU holds the 85th percentile among all CPUs. The result is a system that turns a blocky sandbox into a high-refresh-rate showcase, though the CPU is clearly the limiting factor at lower resolutions.
How This Combo Ranks
The combo’s rank of 307 out of 3710 combos indicates it outperforms the vast majority of tested hardware pairings in Minecraft. With an average benchmark score of 36,945 for the CPU and 77,712 for the GPU, the system’s overall capability is driven by the RTX 5090 D’s massive compute resources. The GPU’s percentile of 92 puts it ahead of nearly all alternatives, while the CPU’s 85th percentile is respectable but not elite. In practical terms, this rank means the combo is overkill for Minecraft’s rendering demands, but it also means there is no setting or resolution in this test that will challenge it. The data confirms every resolution and preset tested stays far above the 60 FPS playable threshold, with the weakest result being 127 FPS average at 4K Ultra. Compared to other combos, this pairing is in the top tier for raw frame delivery, largely because the RTX 5090 D’s 104.8 TFLOPS FP32 performance and 32 GB of GDDR7 memory eliminate any GPU-side bottlenecks.
CPU and GPU Roles
The division of labor between the Ryzen 5 5600F and the RTX 5090 D is clear from the scaling across resolutions. At 1080p, the CPU is the primary constraint: the difference between Low and Ultra settings is only from 527 FPS to 371 FPS, a 30% drop, but the absolute numbers are so high that the GPU is never fully utilized. Moving to 1440p, the GPU begins to take on more work, but the CPU still holds the system back, as evidenced by the Ultra preset dropping to 244 FPS average, which is still far above what a monitor can display. At 4K, the GPU becomes the dominant factor: the Ultra preset falls to 127 FPS average, a 48% reduction from the 1440p Ultra score of 244 FPS. This scaling shows that Minecraft is heavily CPU-bound at lower resolutions, and the RTX 5090 D only starts to stretch its legs at 4K, where the pixel throughput demand finally exceeds what the six-core Zen 3 chip can feed.
The CPU’s Passmark single-thread score of 2872 and multithread score of 19236 indicate solid performance for a 2025 processor, but Minecraft’s primary thread is the bottleneck. The GPU, by contrast, has a Passmark G3D score of 44,065, which is 1.2x higher than its nearest rival, the AMD Radeon RX 6850M XT, and this headroom is wasted at 1080p and 1440p. The data suggests that for this game, the RTX 5090 D is future-proofing for other titles, not a necessity for Minecraft. At 4K, the GPU’s role becomes critical: the 127 FPS Ultra result is still excellent, but it is the only scenario where the GPU’s 1.79 TB/s memory bandwidth and 21,760 shading units are meaningfully engaged.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of performance across all three resolutions and four presets. At 1920x1080, the combo averages 527 FPS on Low, 484 FPS on Medium, 446 FPS on High, and 371 FPS on Ultra. The Medium preset shows a minimum of 412 FPS and a maximum of 557 FPS, indicating tight frame pacing. These numbers are far beyond any display’s refresh rate, making the CPU the sole limiter, as the GPU is barely breaking a sweat.
At 2560x1440, the averages are 452 FPS on Low, 415 FPS on Medium, 382 FPS on High, and 244 FPS on Ultra. The Medium preset’s minimum of 353 FPS and maximum of 478 FPS show a slightly wider spread than at 1080p, but still well within smooth territory. The Ultra preset’s 244 FPS average is a significant drop from High, suggesting that Ultra settings introduce effects that strain the CPU’s single-thread performance more than the GPU.
At 3840x2160, the averages are 324 FPS on Low, 257 FPS on Medium, 204 FPS on High, and 127 FPS on Ultra. The Medium preset reports a minimum of 218 FPS and a maximum of 295 FPS. This is the only resolution where the GPU’s role becomes prominent, with the Ultra preset’s 127 FPS average being 48% lower than the 1440p Ultra score. Even at 4K Ultra, the system maintains over double the playable threshold, confirming that this combo is never challenged by Minecraft’s workload.
FAQ
Q: Can this combo run Minecraft at 4K Ultra settings?
A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 127 FPS, which is well above the 60 FPS playable threshold. All settings at 4K are playable, with High averaging 204 FPS and Low reaching 324 FPS.
Q: Is the RTX 5090 D bottlenecked by the Ryzen 5 5600F in this game?
A: The data indicates yes, especially at lower resolutions. At 1080p, the difference between Low (527 FPS) and Ultra (371 FPS) is only 156 FPS, which is a CPU limitation, as the GPU could push far more frames if allowed. At 4K, the GPU becomes the limiting factor, with Ultra dropping to 127 FPS.
Q: What is the best settings preset for a 144Hz monitor at 1440p?
A: Ultra settings at 2560x1440 produce an average of 244 FPS, which is well above 144Hz. Even the most demanding preset at this resolution is overkill for high-refresh-rate displays, so you can use Ultra without concern.
Q: How does the RTX 5090 D compare to its nearest rival, the AMD Radeon RX 6850M XT?
A: The RTX 5090 D has an average benchmark score of 77,712, which is 1.1% lower than the RX 6850M XT’s score of 78,940. However, the RTX 5090 D’s Passmark G3D score of 44,065 is higher, and it has a 92nd percentile ranking versus the RX 6850M XT’s position as a rival.
Q: Is the Ryzen 5 5600F a good match for this GPU in Minecraft?
A: The CPU is the limiting factor in most scenarios, but the combo still delivers playable frame rates everywhere. The CPU’s single-thread score of 2872 and multithread score of 19,236 are sufficient to keep the GPU fed at 4K, but at 1080p and 1440p, the GPU is underutilized.
Q: What frame rates can I expect at 1080p with Medium settings?
A: The measured average is 484 FPS, with a minimum of 412 FPS and a maximum of 557 FPS. This is far beyond any monitor’s refresh rate, making the experience exceptionally smooth.
Similar Performance Alternatives
Looking at the nearest rivals for each component provides context for what else would behave similarly. The AMD Ryzen 5 5600F has an average benchmark score of 36,945. Its closest rival is the Intel Core Ultra 5 225, which scores 36,938 (a 0% delta), meaning it would deliver nearly identical CPU-bound performance in Minecraft. The AMD Ryzen 5 5500X3D scores 37,018, which is 0.2% higher, and could offer slightly better single-thread performance due to its architecture. The AMD Ryzen AI 7 PRO 450 scores 37,093 (0.4% higher) and the Intel Core i9-12900T scores 37,112 (0.5% higher). All four rivals are within 0.5% of the 5600F’s score, so any of them would produce nearly the same FPS in CPU-bound scenarios at 1080p and 1440p.
For the NVIDIA GeForce RTX 5090 D, with an average score of 77,712, the nearest rival is the AMD Radeon RX 6650M XT, which scores 76,904 (1.1% lower). The AMD Radeon RX 6850M XT scores 78,940 (1.6% higher), and the NVIDIA Tesla P100 PCIe 12 GB scores 79,396 (2.1% higher), with the Tesla P100 PCIe 16 GB at 79,605 (2.4% higher). These deltas are small, so in GPU-bound scenarios at 4K Ultra, the RX 6850M XT would produce approximately 129 FPS (1.6% higher than 127 FPS), while the RX 6650M XT would produce about 126 FPS. The differences are negligible in practice, meaning any of these rivals would deliver a similar experience in Minecraft.
Best Settings per Resolution
The data shows that this combo can run the most demanding preset at every resolution without falling below 60 FPS. At 1920x1080, the best settings are Ultra, with an average FPS of 371. At 2560x1440, the best settings are also Ultra, with an average FPS of 244. At 3840x2160, the best settings are Ultra, with an average FPS of 127. In all cases, the playable settings list includes High, Low, Medium, and Ultra, confirming that no setting is too demanding for this hardware. The verdict by resolution is consistent: Ultra is always the best choice, and the lowest average FPS across all resolutions and presets is 127 FPS, which is still more than double the 60 FPS playable threshold. This combo is effectively uncapped in Minecraft, so users should prioritize display refresh rate and visual quality over frame rate concerns.