Instant compatibility check with FPS benchmarks and optimization tips
Minecraft
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 119 | 191 | 241 | 304 |
| 1440p QHD | 229 | 366 | 461 | 525 |
| 1080p Full HD | 362 | 518 | 563 | 612 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Minecraft on Your System
The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 5090 delivers exceptional performance in Minecraft, with measured frame rates that far exceed the 60 FPS playable threshold across every resolution and preset combination tested. The data shows a system that is overwhelmingly GPU-bound at higher resolutions, yet still capable of producing triple-digit average frame rates even at 4K Ultra settings, making this combination one of the most capable tested for this sandbox title.
Measured FPS Breakdown
At 3840x2160, the RTX 5090 produces an average of 191 FPS on High settings, while the Low preset reaches 304 FPS average. The Medium preset shows an average of 241 FPS with a minimum of 205 FPS and a maximum of 277 FPS, indicating consistent frame delivery. The Ultra preset, the most demanding setting tested, still maintains an average of 119 FPS. This represents a substantial performance drop from Medium to Ultra, with the average falling by roughly half, yet the absolute numbers remain well above playability standards.
Moving to 2560x1440, the frame rates increase dramatically. The High preset achieves 366 FPS average, while Low reaches 525 FPS. Medium delivers 461 FPS average with a minimum of 392 FPS and a maximum of 530 FPS. Ultra at this resolution produces 229 FPS average, which is nearly double the 4K Ultra result. The scaling from 4K to 1440p shows a consistent pattern: roughly a 1.9x improvement in average frame rates across all presets, suggesting that pixel count is the primary limiting factor.
At 1920x1080, performance becomes almost absurdly high. The High preset averages 518 FPS, Low averages 612 FPS, and Medium hits 563 FPS with a minimum of 478 FPS and a maximum of 647 FPS. Ultra still manages an average of 362 FPS. The gap between 1440p and 1080p is smaller than the gap between 4K and 1440p, indicating that at 1080p the system is approaching some form of ceiling, likely CPU-related. The data shows that even the minimum FPS at 1080p Medium — 478 FPS — is higher than the average FPS at 4K High.
The Medium preset is the only one with recorded minimum and maximum values across all resolutions. The spread between min and max is relatively tight: 72 FPS at 4K, 138 FPS at 1440p, and 169 FPS at 1080p. This suggests that frame pacing becomes more variable as resolution decreases, likely because the CPU has more headroom to cause fluctuations when the GPU is less burdened.
CPU and GPU Roles
The scaling between resolutions reveals a clear division of labor. At 3840x2160, the GPU is the dominant constraint. Dropping from Ultra to Low at 4K increases average FPS from 119 to 304, a 2.55x improvement that directly reflects the GPU's workload reduction. The RTX 5090's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are clearly sufficient for 4K rendering, as even the most demanding preset stays above 100 FPS.
At 2560x1440, the balance shifts slightly. The Ultra preset improves from 119 to 229 FPS (1.92x), while Low goes from 304 to 525 FPS (1.73x). The diminishing returns from preset changes suggest that the CPU begins to matter more as resolution drops. The Ryzen 5 5600's six cores and twelve threads, with a boost clock of 4.40 GHz, start to assert themselves as a limiting factor.
At 1920x1080, the CPU's role becomes even more pronounced. The difference between Low (612 FPS) and Ultra (362 FPS) is only 1.69x, compared to 2.55x at 4K. This compression of performance across presets indicates that the Ryzen 5 5600 is nearing its practical limit for Minecraft's single-threaded rendering workload. The CPU's single-thread benchmark score of 882 in 3dmark and 2584 in Cinebench R23 supports this interpretation, as Minecraft's core loop is largely single-threaded.
The data shows that the RTX 5090 is never the bottleneck at 1080p — even the most demanding preset leaves the GPU with headroom. Instead, the Ryzen 5 5600's per-core performance becomes the binding constraint. This is evident from the fact that 1080p Ultra (362 FPS) is not dramatically higher than 1440p Ultra (229 FPS) in relative terms, given the 2.25x pixel reduction.
Best Settings per Resolution
At 3840x2160, the Ultra preset is playable, maintaining an average of 119 FPS. This is comfortably above the 60 FPS threshold, so users can run the game at maximum settings without concern. The data shows that even the most demanding preset at 4K leaves significant headroom, suggesting that this combination could handle additional mods or shader packs that increase workload.
At 2560x1440, Ultra produces an average of 229 FPS. This is more than 3.8x the playable threshold, indicating that the system has substantial spare capacity. The minimum recorded frame rate at Medium (392 FPS) is still far above 60 FPS, and the data suggests that Ultra at 1440p would maintain similar consistency.
At 1920x1080, Ultra averages 362 FPS. This is the highest playable preset across all resolutions, and the performance level is so high that users could enable vertical sync or frame rate limits without any perceptible loss. The Medium preset's minimum of 478 FPS demonstrates that even in the most demanding scenes, the system never comes close to dropping below playable levels.
The verdict by resolution confirms that all four settings — Low, Medium, High, and Ultra — are playable at every resolution tested. The best settings are Ultra at all three resolutions, with average FPS of 119 at 4K, 229 at 1440p, and 362 at 1080p. This is a rare outcome where the most demanding preset is still the recommended choice due to the massive performance headroom.
The Verdict
This PC combination can absolutely run Minecraft at 60 FPS or higher. The data shows that every resolution and every preset tested clears the playable threshold with substantial margin. At 3840x2160, the Ultra preset averages 119 FPS, which is nearly double the playable threshold. At 2560x1440, Ultra averages 229 FPS, and at 1920x1080, Ultra averages 362 FPS.
The verdict by resolution lists all four presets as playable at all three resolutions, with Ultra being the best setting in each case. This means users do not need to compromise on visual quality to achieve smooth gameplay. The lowest average FPS recorded across the entire test suite is 119 FPS at 4K Ultra, which is still nearly twice the playable threshold.
For players who prioritize maximum frame rates over visual fidelity, the Low preset at 1080p delivers 612 FPS average, which would be suitable for competitive play or high-refresh-rate displays. However, even the most demanding configuration leaves the system far from any performance concerns. The data indicates that this combination is overkill for Minecraft in its vanilla form, though it would provide headroom for heavy mod packs, shaders, or ray tracing if those workloads were added.
Similar Performance Alternatives
The Ryzen 5 5600's nearest rivals in benchmark scores include the Intel Core Ultra 7 258V, which scores 20454 versus the 5600's 20468, a delta of 0.1 percent. The AMD Ryzen 5 8500G scores 20425, a 0.2 percent difference, and the AMD EPYC 9454P also scores 20422, another 0.2 percent delta. The AMD EPYC 7713 at 20363 is 0.5 percent behind. These processors would likely produce nearly identical frame rates in Minecraft, as the CPU bottleneck at 1080p would be similar.
On the GPU side, the RTX 5090's nearest rivals include the NVIDIA Tesla P100 PCIe 16 GB, which scores 79605 against the 5090's 79842, a 0.3 percent delta. The Tesla P100 PCIe 12 GB scores 79396, 0.6 percent behind, while the AMD Radeon RX 6850M XT at 78940 is 1.1 percent behind. Interestingly, the AMD Radeon Pro Vega 64X scores 80959, which is 1.4 percent higher than the RTX 5090, though this is within the margin of benchmark variance.
For this specific game, the GPU rivals would behave nearly identically at 4K, where the RTX 5090 is the primary driver. However, at 1080p, the CPU becomes the limiting factor, so the choice of GPU among these rivals would have minimal impact on frame rates. Players could expect similar performance from any of these near-identical scoring components, though the RTX 5090's higher percentile ranking (92nd versus all GPUs) suggests it edges out most alternatives.
How This Combo Ranks
The Ryzen 5 5600 and RTX 5090 combination ranks 198th out of 3710 tested combos for Minecraft, placing it in the top 5.3 percent of all systems tested. This ranking reflects the exceptional performance measured across all resolutions and presets. The CPU alone ranks in the 74th percentile of all CPUs, while the GPU ranks in the 92nd percentile of all GPUs, and their combined performance in this game exceeds what either component's individual ranking might suggest.
The high ranking is particularly notable given that the Ryzen 5 5600 is not a top-tier CPU by overall benchmark scores — its average benchmark score of 20468 places it in the mid-range. However, Minecraft's relatively light CPU requirements, combined with the RTX 5090's massive GPU headroom, allow this combination to punch well above its weight. The data implies that for Minecraft specifically, the GPU matters far more than the CPU, and this combo's strong GPU is the primary driver of its high rank.
FAQ
Q: What is the average FPS at 1920x1080 with Ultra settings?
A: The average FPS at 1080p Ultra is 362, with no minimum or maximum values recorded for that preset.
Q: Can this system run Minecraft at 4K with maximum settings?
A: Yes, at 3840x2160 the Ultra preset averages 119 FPS, which is well above the 60 FPS playable threshold.
Q: Which component is the bottleneck at 1080p resolution?
A: The data shows diminishing returns from preset changes at 1080p, indicating the AMD Ryzen 5 5600's single-thread performance becomes the limiting factor.
Q: What is the lowest average FPS recorded across all tested configurations?
A: The lowest average FPS is 119 at 3840x2160 with Ultra settings, which is still nearly double the playable threshold.
Q: How does this combination rank compared to other tested systems?
A: It ranks 198th out of 3710 combos, placing it in the top 5.3 percent of all tested systems for Minecraft.
Q: What is the minimum FPS recorded at Medium settings in 1440p?
A: At 2560x1440 with Medium settings, the minimum FPS is 392, with an average of 461 and a maximum of 530.