Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Minecraft
Sandbox 2011

Minecraft

73%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
481 FPS
Ultra 1080p Measured
339 FPS

1440p (2K / QHD)

Low 1440p Measured
413 FPS
Ultra 1440p Measured
244 FPS

4K (Ultra HD)

Low 4K Measured
324 FPS
Ultra 4K Measured
127 FPS
2.5ms Frame Time
4ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,554
Your CPU 17,035
Graphics Card
Required 26,954
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 127 204 257 324
1440p QHD 244 349 379 413
1080p Full HD 339 407 442 481

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 407
1920x1080 Low 481
1920x1080 Medium 442
1920x1080 Ultra 339
2560x1440 High 349
2560x1440 Low 413
2560x1440 Medium 379
2560x1440 Ultra 244
3840x2160 High 204
3840x2160 Low 324
3840x2160 Medium 257
3840x2160 Ultra 127

Performance Analysis: Minecraft on Your System

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which delivers an average of 127 FPS. While High, Medium, and Low all clear the 60 FPS threshold comfortably, Ultra represents the top visual quality tier that still maintains a playable frame rate. The gap between Ultra and the next lower preset is substantial: Medium averages 257 FPS, High averages 204 FPS, and Low averages 324 FPS. The data shows that Ultra is the only preset at this resolution that pushes the hardware hard enough to drop below 200 FPS, but it remains far above the playability floor.

At 2560x1440, the best settings are also Ultra, with an average of 244 FPS. The scaling from 4K to 1440p is pronounced: Ultra improves from 127 FPS to 244 FPS, a gain of roughly 92%. Medium at this resolution averages 379 FPS, High averages 349 FPS, and Low averages 413 FPS. Every preset at 1440p is well beyond the 60 FPS target, so the choice comes down to visual fidelity versus headroom. The recorded data indicates that even the heaviest preset leaves substantial performance in reserve.

At 1920x1080, Ultra remains the best setting, averaging 339 FPS. The pattern continues: Medium averages 442 FPS, High averages 407 FPS, and Low averages 481 FPS. The minimum recorded frame rate at 1080p Medium is 376 FPS, which is still more than six times the playable threshold. For this resolution, the hardware is so far ahead that any preset choice will produce a smooth experience. The database recommends Ultra for maximum visual quality, since the performance cost is minimal relative to the frame rates on offer.

CPU and GPU Roles

The measured FPS data reveals that the GPU is the dominant factor at 4K, while the CPU becomes more influential at lower resolutions. At 3840x2160, the difference between Low and Ultra is 197 FPS (324 versus 127), which suggests that the graphics card is heavily loaded across all presets. The Ryzen 5 3600, with its 6 cores and 12 threads, provides enough throughput to keep the RTX 5090 D fed at 4K, but the GPU's workload scales significantly with preset quality.

At 2560x1440, the spread between Low and Ultra narrows to 169 FPS (413 versus 244), indicating that the CPU begins to play a larger role as resolution drops. The RTX 5090 D has more headroom at this resolution, but the Ryzen 5 3600's single-thread performance, measured at 696 in 3DMark single-thread and 2562 in Passmark single-thread, becomes a more noticeable constraint. The benchmark results show that the CPU can still deliver high frame rates, but the scaling from 4K to 1440p is not purely linear, which points to CPU involvement.

At 1920x1080, the Low-to-Ultra delta is 142 FPS (481 versus 339), the smallest relative gap across resolutions. This is a classic sign of CPU limitation: at 1080p, the GPU is less stressed, and the Ryzen 5 3600's processing power becomes the primary factor. The CPU's multi-threaded scores, including 15,045 in Cinebench R23 multi-core and 17,700 in Passmark multi-thread, indicate that it can handle Minecraft's workload, but its single-thread performance caps the maximum frame rates. The data suggests that upgrading the CPU would yield larger gains at 1080p than at 4K, where the GPU is the clear bottleneck.

Measured FPS Breakdown

3840x2160: Low averages 324 FPS. Medium averages 257 FPS, with a minimum of 218 and a maximum of 295. High averages 204 FPS. Ultra averages 127 FPS. The minimum and maximum values for Low, High, and Ultra were not recorded, but the averages show a clear stepwise decline as settings increase. The 218 FPS minimum at Medium is still far above the 60 FPS threshold, so even the lowest recorded frame rate at 4K is playable.

2560x1440: Low averages 413 FPS. Medium averages 379 FPS, with a minimum of 323 and a maximum of 436. High averages 349 FPS. Ultra averages 244 FPS. The Medium preset at 1440p shows a tighter range than at 4K, with the minimum only 56 FPS below the average. This indicates consistent performance across the scene. The Ultra preset's 244 FPS average is nearly double the 4K Ultra figure, demonstrating the resolution scaling.

1920x1080: Low averages 481 FPS. Medium averages 442 FPS, with a minimum of 376 and a maximum of 509. High averages 407 FPS. Ultra averages 339 FPS. The 1080p Medium range, from 376 to 509 FPS, is the widest recorded spread in the data. This variance is likely due to CPU-bound moments where the Ryzen 5 3600's single-thread performance fluctuates. Even the minimum at 1080p Medium exceeds the 4K Ultra average, which highlights how resolution affects the performance profile.

The Verdict

This PC can run Minecraft at 60 FPS or higher across every tested resolution and preset. The verdict by resolution is unambiguous: at 3840x2160, all four presets (Low, Medium, High, Ultra) are playable, with Ultra averaging 127 FPS. At 2560x1440, all presets are playable, with Ultra averaging 244 FPS. At 1920x1080, all presets are playable, with Ultra averaging 339 FPS. The playable threshold is 60 FPS, and the lowest average recorded in the entire dataset is 127 FPS at 4K Ultra. That means the hardware never dips below double the playability floor in any configuration tested.

The strongest statement the data supports is that this combo is overqualified for Minecraft at standard display resolutions. At 1080p and 1440p, the frame rates are so high that the limiting factor becomes the display refresh rate rather than the hardware. At 4K, the RTX 5090 D still has massive headroom, and the Ryzen 5 3600 does not prevent the GPU from delivering well over 100 FPS on the most demanding preset. The database records no scenario where this combination fails to meet the 60 FPS target.

How This Combo Ranks

This CPU and GPU pairing ranks 539 out of 3,710 tested combinations in Minecraft. That places it in the top 15% of all recorded configurations. The rank reflects the combination's ability to maintain high frame rates across all resolutions and presets, which is consistent with the measured FPS data. The CPU alone sits at the 71st percentile among all processors, while the GPU sits at the 92nd percentile among all graphics cards. The combined rank is lower than the GPU's percentile would suggest, which indicates that the Ryzen 5 3600 holds back the RTX 5090 D in this game.

The 539th rank out of 3,710 combos means there are 538 configurations that perform better in Minecraft. Those are likely pairings with faster CPUs, since the RTX 5090 D is already near the top of the GPU hierarchy. The GPU's average benchmark score of 77,712 and its 92nd percentile ranking show that it is a top-tier part. The CPU's average benchmark score of 17,035 and its 71st percentile ranking are respectable but not exceptional. In a game like Minecraft, which can be sensitive to single-thread performance, the CPU's 3DMark single-thread score of 696 and Passmark single-thread score of 2,562 represent the main limitation.

Similar Performance Alternatives

For the CPU, the nearest rivals are all within a narrow performance band. The Intel Core i7-1260P has an average score of 17,007, which is 0.2% lower than the Ryzen 5 3600's 17,035. The AMD EPYC 7742 scores 16,998, also 0.2% lower. The Intel Core i5-11400 scores 17,067, which is 0.2% higher, and the AMD EPYC 7573X scores 17,070, also 0.2% higher. These four alternatives would behave nearly identically in Minecraft, with differences well within measurement noise. The i5-11400 and EPYC 7573X might edge out the Ryzen 5 3600 by a hair, while the i7-1260P and EPYC 7742 would trail by an equally small margin.

For the GPU, the nearest rivals show a similar clustering. The AMD Radeon RX 6650M XT has an average score of 76,904, which is 1.1% higher than the RTX 5090 D's 77,712. The AMD Radeon RX 6850M XT scores 78,940, which is 1.6% lower. The NVIDIA Tesla P100 PCIe 12 GB scores 79,396, which is 2.1% lower, and the Tesla P100 PCIe 16 GB scores 79,605, which is 2.4% lower. In practical terms, all of these GPUs would deliver similar frame rates in Minecraft, with the RX 6650M XT being the closest match. The Tesla P100 variants are compute-oriented cards, but their benchmark scores suggest they would handle Minecraft at comparable performance levels.

When considering an upgrade path, the data suggests that swapping the Ryzen 5 3600 for the Intel Core i5-11400 or AMD EPYC 7573X would yield negligible gains, since the delta is only 0.2%. The GPU alternatives are similarly close, with the RX 6650M XT being the only one that scores higher. For builders looking for similar performance, any of these rivals would produce nearly identical results in Minecraft. The current combo's rank of 539 out of 3,710 is solid, and the nearest rivals would likely rank within a few positions.