Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Minecraft
Sandbox 2011

Minecraft

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
420 FPS
Ultra 1080p Measured
296 FPS

1440p (2K / QHD)

Low 1440p Measured
360 FPS
Ultra 1440p Measured
229 FPS

4K (Ultra HD)

Low 4K Measured
290 FPS
Ultra 4K Measured
119 FPS
2.8ms Frame Time
4ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,554
Your CPU 21,484
Graphics Card
Required 26,954
Your GPU 79,842

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 119 191 241 290
1440p QHD 229 305 331 360
1080p Full HD 296 356 386 420

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 356
1920x1080 Low 420
1920x1080 Medium 386
1920x1080 Ultra 296
2560x1440 High 305
2560x1440 Low 360
2560x1440 Medium 331
2560x1440 Ultra 229
3840x2160 High 191
3840x2160 Low 290
3840x2160 Medium 241
3840x2160 Ultra 119

Performance Analysis: Minecraft on Your System

Minecraft is a sandbox title that scales across a very wide range of hardware, and the combination of the AMD Ryzen 5 2600 with the NVIDIA GeForce RTX 5090 produces an interesting split: the GPU is overwhelmingly powerful, while the CPU is a 2018-era six-core part. The recorded benchmark data shows that this pairing delivers extremely high frame rates at every tested resolution, with the CPU becoming the visible constraint only at lower resolutions where the GPU has headroom to spare. The database contains measured FPS values for 1080p, 1440p, and 4K, each at Low, Medium, High, and Ultra settings, and every single configuration clears the 60 FPS playable threshold by a wide margin.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra. The recorded average frame rate at 1080p Ultra is 296 FPS, which is nearly five times the playable threshold. Since even the heaviest settings leave such a large margin, there is no scenario where this resolution drops below 60 FPS. For players who prioritize visual fidelity, Ultra is the obvious choice at 1080p.

At 2560x1440, the best preset that remains above 60 FPS is also Ultra. The average frame rate at 1440p Ultra is 229 FPS. This is lower than the 1080p result, as expected from the increased pixel count, but still far above the 60 FPS threshold. The data shows no reason to reduce settings at this resolution, as Ultra delivers more than three times the required frame rate.

At 3840x2160, the situation is identical in terms of playability: Ultra is the best preset that stays above 60 FPS, with an average of 119 FPS. This is the lowest average recorded across all tested configurations, but it still doubles the 60 FPS threshold. The RTX 5090’s 32 GB of GDDR7 memory and 512-bit bus provide ample bandwidth for 4K rendering, and the recorded data confirms that even Ultra settings at 4K remain comfortably playable.

In summary, for all three resolutions, Ultra is the recommended preset. The lowest average FPS across the entire measurement set is 119 FPS at 4K Ultra, so there is never a need to compromise on settings.

FAQ

Q: Can this PC run Minecraft at 4K with max settings?

A: Yes. The recorded data shows an average of 119 FPS at 3840x2160 with Ultra settings. This is above the 60 FPS playable threshold, and it is the most demanding configuration tested.

Q: What is the highest average frame rate recorded for this combo?

A: The highest average is 420 FPS, achieved at 1920x1080 with Low settings. This is the fastest configuration in the database for this pairing.

Q: Is there any resolution or setting where the frame rate drops below 60 FPS?

A: No. Every measured configuration, from 1080p Low at 420 FPS to 4K Ultra at 119 FPS, stays above 60 FPS. The lowest average is 119 FPS at 4K Ultra.

Q: How does the CPU affect performance at lower resolutions?

A: At 1080p, the average frame rates range from 296 FPS at Ultra to 420 FPS at Low. The gap between these settings is 124 FPS, which suggests that the CPU, the AMD Ryzen 5 2600 with a PassMark single-thread score of 2239, limits how far frame rates can rise when the GPU is underutilized.

Q: What is the frame time consistency at Medium settings?

A: The database includes minimum and maximum FPS values only for Medium settings. At 4K Medium, the range is 205 to 277 FPS, with an average of 241 FPS. At 1440p Medium, the range is 282 to 381 FPS, with an average of 331 FPS. At 1080p Medium, the range is 328 to 444 FPS, with an average of 386 FPS.

Q: Does the RTX 5090’s benchmark score align with its gaming performance here?

A: The GPU has an average benchmark score of 79842 and sits in the 92nd percentile of all GPUs. Its PassMark G3D score is 39650, which is extremely high. The measured FPS values in Minecraft are consistent with this level of performance, as even 4K Ultra stays above 119 FPS.

Measured FPS Breakdown

The database provides average FPS for all settings and resolutions, with minimum and maximum values recorded only for Medium presets.

At 1920x1080, Low settings produce an average of 420 FPS. Medium settings average 386 FPS, with a minimum of 328 FPS and a maximum of 444 FPS. High settings average 356 FPS. Ultra settings average 296 FPS. The progression from Low to Ultra is smooth, with each step reducing the average by roughly 30 to 60 FPS. The largest jump is from High to Ultra, a drop of 60 FPS, which indicates that Ultra settings add a noticeable load.

At 2560x1440, Low settings average 360 FPS. Medium settings average 331 FPS, with a minimum of 282 FPS and a maximum of 381 FPS. High settings average 305 FPS. Ultra settings average 229 FPS. The difference between Low and Ultra is 131 FPS, which is larger than the 124 FPS gap seen at 1080p. This suggests that the GPU is taking on more work at 1440p, but the CPU is still not the primary bottleneck.

At 3840x2160, Low settings average 290 FPS. Medium settings average 241 FPS, with a minimum of 205 FPS and a maximum of 277 FPS. High settings average 191 FPS. Ultra settings average 119 FPS. The gap between High and Ultra is 72 FPS, which is the largest single-setting drop in the entire dataset. At 4K, the GPU’s rendering load becomes the dominant factor, and the RTX 5090’s 104.8 TFLOPS of FP32 compute is what pushes Ultra to 119 FPS.

Looking at the scaling across resolutions, 1080p Low to 1440p Low shows a drop from 420 to 360 FPS, a 60 FPS reduction. 1440p Low to 4K Low drops from 360 to 290 FPS, a 70 FPS reduction. For Ultra settings, 1080p to 1440p drops from 296 to 229 FPS, and 1440p to 4K drops from 229 to 119 FPS. The 4K Ultra result is the only configuration that comes close to the 60 FPS threshold, but it still exceeds it by 59 FPS.

The Medium preset data with min/max values shows that frame pacing remains tight. At 1080p, the spread from minimum to maximum is 116 FPS. At 1440p, the spread is 99 FPS. At 4K, the spread is 72 FPS. This narrowing spread at higher resolutions indicates that the GPU’s workload becomes more consistent as the pixel count increases, reducing the variance caused by CPU scheduling.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 2600, based on average benchmark scores, are the Intel Core Ultra 5 228V, the Intel Core i9-11900H, the Intel Xeon D-1746TER, and the AMD EPYC 9454. The Ryzen 5 2600 has an average benchmark score of 21484, placing it in the 75th percentile of all CPUs. The Intel Core Ultra 5 228V scores 21440, which is 0.2% lower. The Intel Core i9-11900H scores 21367, 0.5% lower. The Intel Xeon D-1746TER scores 21635, 0.7% higher. The AMD EPYC 9454 scores 21223, 1.2% lower. In practical terms, any of these CPUs would produce nearly identical frame rates in Minecraft when paired with the RTX 5090, since the game’s performance at higher resolutions is mostly GPU-bound. At 1080p, where the CPU matters more, the differences between these processors are under 1.5%, so the observed FPS values would remain within a few frames of each other.

For the NVIDIA GeForce RTX 5090, the nearest rivals are the NVIDIA Tesla P100 PCIe 16 GB, the NVIDIA Tesla P100 PCIe 12 GB, the AMD Radeon RX 6850M XT, and the AMD Radeon Pro Vega 64X. The RTX 5090 has an average benchmark score of 79842, placing it in the 92nd percentile of all GPUs. The Tesla P100 PCIe 16 GB scores 79605, 0.3% lower. The Tesla P100 PCIe 12 GB scores 79396, 0.6% lower. The AMD Radeon RX 6850M XT scores 78940, 1.1% lower. The AMD Radeon Pro Vega 64X scores 80959, 1.4% higher. These GPUs would deliver very similar raw compute performance, but the RTX 5090 has a substantial memory advantage with 32 GB of GDDR7 and 1.79 TB/s of bandwidth, which matters for 4K texture-heavy scenes. The Tesla P100 cards, despite similar benchmark scores, lack modern game features and have older drivers, so real-world Minecraft performance could differ despite the close scores.

If a system builder were to swap the RTX 5090 for one of its nearest rivals, the frame rates in Minecraft would stay within roughly 1.5% of the recorded values, assuming the same CPU and settings. The AMD Radeon RX 6850M XT, being a mobile part, might exhibit different thermal behavior, but its average score suggests similar throughput. The AMD Radeon Pro Vega 64X, with a slightly higher score, could produce marginally higher FPS, but the difference would be imperceptible in practice.

The Verdict

This PC can run Minecraft at every resolution and preset combination recorded in the database. The verdictByResolution data confirms that all playable settings are available at each resolution. At 3840x2160, the playable settings include High, Low, Medium, and Ultra, with the best setting being Ultra at an average of 119 FPS. At 2560x1440, all four settings are playable, with Ultra averaging 229 FPS. At 1920x1080, all four settings are playable, with Ultra averaging 296 FPS.

The 60 FPS playable threshold is exceeded by a factor of two at the worst-case configuration (4K Ultra at 119 FPS) and by a factor of seven at the best-case configuration (1080p Low at 420 FPS). There is no scenario in the measured data where this combo dips below 60 FPS. The RTX 5090, with its 92nd percentile GPU rank and 39650 PassMark G3D score, provides an overwhelming amount of rendering power for a title like Minecraft, which is not particularly demanding on modern hardware. The Ryzen 5 2600, despite being an older six-core processor with a single-thread score of 2239, still delivers enough CPU throughput to keep frame rates well above the threshold, even at 1080p where the CPU load is highest.

For users with a 4K display, Ultra settings are fully playable with an average of 119 FPS. For 1440p and 1080p displays, Ultra settings produce 229 and 296 FPS respectively. The data indicates that this is a configuration that never needs to compromise on visual quality, as the lowest recorded average FPS is still double the playable threshold.

How This Combo Ranks

In the database of tested combinations, this pairing of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 5090 ranks 803rd out of 3710 total combos for Minecraft. This places it in the top 21.6% of all tested systems. The rank reflects the fact that the RTX 5090 is a top-tier GPU, but the Ryzen 5 2600 is a mid-range CPU from 2018. The combination does not reach the very top of the rankings because other combos pair the RTX 5090 with more modern CPUs that can sustain higher frame rates at 1080p, where the CPU becomes a limiting factor.

The rank of 803 out of 3710 is still strong, especially considering that the average FPS at 4K Ultra is 119 FPS, which is higher than many systems achieve at 1080p. The GPU’s 92nd percentile rank contributes most of the performance, while the CPU’s 75th percentile rank holds back the absolute maximum frame rates at lower resolutions. For a game like Minecraft, which can run on integrated graphics, this combo is vastly overqualified, and the rank reflects that it sits in the upper fifth of all tested configurations.

The RTX 5090’s average benchmark score of 79842 compared to the CPU’s 21484 shows a heavy imbalance, but the measured FPS data shows that this imbalance does not hurt playability. The only observable effect is that 1080p Low cannot reach the 420+ FPS that a newer CPU might allow, but even that value is far beyond what any display can show. In the context of the full database, this combo ranks in the top quarter, which is a reasonable outcome for a pairing of an older six-core CPU with a flagship GPU.