Instant compatibility check with FPS benchmarks and optimization tips
Microsoft Flight Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 42 | 55 | 71 |
| 1440p QHD | 54 | 56 | 75 | 96 |
| 1080p Full HD | 66 | 70 | 93 | 119 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Microsoft Flight Simulator on Your System
Can Intel Core Ultra 9 290K Plus + NVIDIA GeForce RTX 4060 run Microsoft Flight Simulator? The measured data says yes, but the experience varies sharply by resolution. At 1080p, this combination is fully capable, with all presets clearing the 60 FPS playability threshold. At 1440p, the system drops to Medium as the safest high-fidelity option. At 4K, however, only the Low preset remains fluid, as the GPU becomes the limiting factor. The pairing ranks 1978th out of 3714 tested combinations for this title, placing it in the upper half of all systems. The data shows a clear pattern: the RTX 4060 is the bottleneck at higher resolutions, while the Core Ultra 9 290K provides ample headroom at lower settings.
Measured FPS Breakdown
1920x1080: The system delivers its strongest performance at this resolution. At Low settings, the average frame rate hits 119 FPS, which is nearly double the 60 FPS threshold. Moving to Medium, the average drops to 93 FPS, with a minimum of 79 FPS and a maximum of 107 FPS. High settings produce an average of 70 FPS. The most demanding Ultra preset still holds an average of 66 FPS. All four presets remain comfortably above the playable threshold, making 1080p the only resolution where the Ultra preset is viable.
2560x1440: Performance scales down predictably as pixel count increases. Low settings average 96 FPS, which is still strong. Medium settings average 75 FPS, with a minimum of 64 FPS and a maximum of 86 FPS — the minimum just clears the 60 FPS line. High settings drop to an average of 56 FPS, which falls below the threshold. Ultra settings average 54 FPS. The data shows a clear cliff between Medium and High at this resolution, with the two highest presets failing to maintain a consistent 60 FPS.
3840x2160: The 4K results show the GPU struggling with the higher pixel load. Low settings average 71 FPS, which is the only preset that clears 60 FPS. Medium settings average 55 FPS, with a minimum of 47 FPS and a maximum of 64 FPS — the variance is wide, and the average is below the threshold. High settings average 42 FPS, and Ultra settings average 40 FPS. The delta between Low and Ultra is 31 FPS, a significant drop that highlights the heavy cost of higher detail at 4K.
The data also shows that the gap between Medium and Ultra narrows at higher resolutions. At 1080p, the difference between those presets is 27 FPS (93 vs 66). At 1440p, it is 21 FPS (75 vs 54). At 4K, it is 15 FPS (55 vs 40). This compression suggests that at 4K, the GPU is so saturated that even reducing settings from Ultra to Medium yields only modest gains, whereas at 1080p, the same reduction provides a much larger FPS boost.
CPU and GPU Roles
The benchmark results indicate that the GPU is the dominant constraint at higher resolutions, while the CPU becomes more relevant at lower settings. The Core Ultra 9 290K is a high-end desktop processor with 24 cores and 24 threads, and its benchmark scores are strong — it ranks in the 96th percentile among all CPUs, with an average benchmark score of 84003. The RTX 4060, by contrast, ranks in the 61st percentile among GPUs, with an average score of 17639. This disparity suggests that the GPU is the weaker link in this pairing.
The scaling between resolutions confirms this. From 1080p to 1440p at Medium settings, the average FPS drops from 93 to 75, a 19% reduction. From 1440p to 4K at Medium, it drops from 75 to 55, a 27% reduction. This accelerating decline as resolution increases is typical of a GPU-bound scenario. If the CPU were the bottleneck, the frame rate would remain relatively flat across resolutions, since the CPU workload is largely independent of pixel count.
At Low settings, the pattern is similar but less severe. The average FPS goes from 119 at 1080p to 96 at 1440p to 71 at 4K. The larger drop at 4K (26% from 1440p) again points to GPU saturation. The CPU's role is more apparent at 1080p Low, where the 119 FPS result shows that the processor can feed the GPU fast enough to hit near-120 FPS. The CPU's single-thread performance is strong — its Cinebench R23 single-core score is 7303, and its Passmark single-thread score is 4823 — which helps in a flight simulator that relies heavily on draw calls and physics calculations. However, the data does not show any scenario where the CPU holds the system back; the GPU is always the limiting factor at 4K and at the higher presets.
Best Settings per Resolution
At 3840x2160, the only preset that stays at or above 60 FPS is Low, with an average of 71 FPS. Medium averages 55 FPS, which is below the threshold. High and Ultra average 42 and 40 FPS, respectively. For a playable 4K experience, Low is the only choice.
At 2560x1440, the Medium preset is the most demanding option that maintains 60 FPS, averaging 75 FPS with a minimum of 64 FPS. High averages 56 FPS, which misses the threshold. Low averages 96 FPS, but Medium offers a better visual quality-to-performance balance.
At 1920x1080, the Ultra preset is viable, averaging 66 FPS. This is the only resolution where the highest detail setting clears the 60 FPS line. High averages 70 FPS, Medium 93 FPS, and Low 119 FPS. All four presets are playable, but Ultra provides the full visual experience without dropping below the threshold.
FAQ
Q: Can this system run Microsoft Flight Simulator at 4K with high detail settings?
A: No. At 3840x2160, the High preset averages 42 FPS and Ultra averages 40 FPS, both well below the 60 FPS playability threshold. Only the Low preset, averaging 71 FPS, is playable at this resolution.
Q: What is the best preset for 1440p gaming?
A: The Medium preset is the best choice, averaging 75 FPS with a minimum of 64 FPS. It clears the 60 FPS threshold while providing higher detail than Low. The High preset fails to maintain 60 FPS, averaging 56 FPS.
Q: Does the RTX 4060 bottleneck the Core Ultra 9 290K in this game?
A: Yes, the data indicates the GPU is the limiting factor at higher resolutions. The CPU ranks in the 96th percentile among all CPUs, while the GPU ranks in the 61st percentile. The FPS drops significantly from 1440p to 4K, which is characteristic of GPU-bound performance.
Q: Is the Ultra preset playable at 1080p?
A: Yes, the Ultra preset averages 66 FPS at 1920x1080, which is above the 60 FPS threshold. This is the only resolution where Ultra is playable. High averages 70 FPS, Medium 93 FPS, and Low 119 FPS.
Q: How does this system compare to other tested configurations?
A: The combination ranks 1978th out of 3714 tested combos for this game, placing it in the upper half of all systems. The CPU's average benchmark score of 84003 is close to the Intel Core Ultra 9 285K (83807, 0.2% slower) and the AMD EPYC 4584PX (83090, 1.1% slower). The GPU's average score of 17639 is nearly identical to the AMD Radeon HD 7790 (17666, 0.2% faster) and the AMD Radeon 780M (17588, 0.3% slower).
Q: What frame rates can be expected at Medium settings across all resolutions?
A: At 1080p, Medium averages 93 FPS (min 79, max 107). At 1440p, it averages 75 FPS (min 64, max 86). At 4K, it averages 55 FPS (min 47, max 64). Only the 1080p and 1440p results clear the 60 FPS threshold.
Similar Performance Alternatives
For the CPU, the Core Ultra 9 290K's closest rivals are all within a small performance band. The Intel Core Ultra 9 285K scores 83807, which is 0.2% lower — effectively identical in real-world terms. The AMD EPYC 4584PX scores 83090, 1.1% lower, and the AMD EPYC 9135 scores 82980, 1.2% lower. On the other side, the AMD EPYC 7F72 scores 85072, which is 1.3% higher. Any of these processors would deliver nearly indistinguishable frame rates in this game, as the CPU is not the bottleneck in the measured scenarios.
For the GPU, the RTX 4060's nearest rivals are surprisingly close in average benchmark score. The AMD Radeon HD 7790 scores 17666, just 0.2% higher. The AMD Radeon 780M scores 17588, 0.3% lower, and the AMD Radeon Pro 560 scores 17551, 0.5% lower. The AMD Radeon Pro 460 scores 17509, 0.7% lower. These deltas are negligible — all four GPUs would perform within a margin of error of the RTX 4060 in Microsoft Flight Simulator. The practical takeaway is that users with any of these GPUs should expect similar FPS results, particularly at 4K where the GPU is the limiting factor.
The Verdict
The data shows that this PC can run Microsoft Flight Simulator, but the experience depends heavily on resolution. At 1920x1080, the system clears 60 FPS on all four presets, including Ultra at 66 FPS. This is the definitive answer for users who want maximum visual quality. At 2560x1440, the system is playable on Low and Medium, with Medium averaging 75 FPS and a minimum of 64 FPS. High and Ultra fall short at 56 and 54 FPS, respectively. At 3840x2160, only Low is playable, averaging 71 FPS. Medium is close at 55 FPS but does not sustain 60 FPS. The overall ranking of 1978th out of 3714 combos places this system in the upper half of all tested configurations, but the GPU is clearly the limiting factor at higher resolutions. Users targeting 4K should stick to Low settings, while 1080p users can enjoy the full Ultra experience without compromise.