Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Microsoft Flight Simulator
Flight Simulation 2020

Microsoft Flight Simulator

82%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
106 FPS
Ultra 1080p Measured
59 FPS

1440p (2K / QHD)

Low 1440p Measured
85 FPS
Ultra 1440p Measured
48 FPS

4K (Ultra HD)

Low 4K Measured
63 FPS
Ultra 4K Measured
35 FPS
16.1ms Frame Time
24ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,444
Your CPU 46,062
Graphics Card
Required 27,967
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 35 37 49 63
1440p QHD 48 50 66 85
1080p Full HD 59 62 82 106

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 62
1920x1080 Low 106
1920x1080 Medium 82
1920x1080 Ultra 59
2560x1440 High 50
2560x1440 Low 85
2560x1440 Medium 66
2560x1440 Ultra 48
3840x2160 High 37
3840x2160 Low 63
3840x2160 Medium 49
3840x2160 Ultra 35

Performance Analysis: Microsoft Flight Simulator on Your System

The Intel Core Ultra 5 235 paired with the NVIDIA GeForce RTX 5050 is a mainstream desktop combo that targets 1080p and 1440p gaming. In Microsoft Flight Simulator, the data shows a system that is highly capable at lower resolutions but quickly runs out of headroom when pushed to 4K or maxed-out presets. The measured frame rates reveal a clear hierarchy where the RTX 5050’s 8 GB memory and 2560 shading units become the primary constraint as pixel count rises, while the 14-core Arrow Lake CPU provides sufficient throughput to avoid bottlenecking at standard settings. This analysis breaks down the exact performance at each resolution and preset, contextualizes the combo’s standing among 3,714 tested configurations, and identifies which settings deliver a stable 60 FPS experience.

Measured FPS Breakdown

The benchmark data for this combo in Microsoft Flight Simulator covers three resolutions and four quality presets, with average frame rates provided for all configurations and minimum/maximum values recorded only for the Medium preset at each resolution. Starting at 1920x1080, the system delivers its strongest results. At Low settings, the average FPS reaches 106, providing a very high refresh rate experience. Moving to Medium, the average drops to 82 FPS, with a minimum of 70 and a maximum of 95, indicating consistent frame pacing. High settings produce an average of 62 FPS, while Ultra averages 59 FPS, just one frame shy of the 60 FPS playable threshold.

At 2560x1440, the performance scaling shows a steeper decline. Low settings average 85 FPS, which remains comfortably above the threshold. Medium settings average 66 FPS, with a minimum of 57 and a maximum of 76, meaning the system can dip below 60 FPS during demanding scenes despite a solid average. High settings fall to an average of 50 FPS, and Ultra drops further to 48 FPS. The gap between Low and Medium at 1440p is 19 FPS, while the gap between Medium and High is 16 FPS, showing that each preset step costs roughly a fifth of the previous frame rate.

At 3840x2160, the RTX 5050 clearly struggles with the flight simulator’s terrain rendering. Low settings are the only playable option, averaging 63 FPS. Medium averages 49 FPS, with a minimum of 42 and a maximum of 56, which falls short of the 60 FPS target. High averages 37 FPS, and Ultra averages 35 FPS. The difference between Low and Medium at 4K is 14 FPS, while the difference between High and Ultra is only 2 FPS, suggesting that the Ultra preset adds minimal visual benefit relative to its performance cost at this resolution. Notably, the Medium preset at 4K has a minimum FPS of 42, which is 21 FPS below the average, indicating significant frame time spikes during complex flight segments.

CPU and GPU Roles

The data indicates that the GPU becomes the dominant bottleneck as resolution increases, while the CPU’s role is more prominent at lower resolutions where frame rates are higher. At 1920x1080, the combo achieves 106 FPS on Low settings, which is a frame rate that demands strong single-thread performance from the Intel Core Ultra 5 235. The CPU’s PassMark single-thread score of 4516 and Cinebench R23 single-core score of 2085 place it in the 89th percentile of all CPUs, providing enough headroom for the RTX 5050 to operate near its limits. However, at 1080p Ultra, the average drops to 59 FPS, showing that the GPU’s 13.17 TFLOPS of FP32 performance is the limiting factor when shader complexity increases.

Scaling from 1080p to 1440p, the average FPS on Medium drops from 82 to 66, a 19.5% reduction. This aligns with the pixel count increase of 78%, but the frame rate reduction is proportionally smaller, indicating that the CPU is still contributing meaningfully at 1440p Medium. Moving from 1440p to 4K at Medium, the average drops from 66 to 49 FPS, a 25.8% reduction for a 225% pixel increase. This disproportionate scaling demonstrates that the RTX 5050’s memory bandwidth of 320 GB/s and 8 GB GDDR6 capacity are insufficient to feed the GPU at 4K, making the GPU the clear primary constraint. The CPU’s role diminishes further at 4K, as the average FPS differences between presets shrink to single digits, confirming that the graphics card is saturated regardless of CPU performance.

The CPU’s multithreaded capabilities, evidenced by a PassMark multithread score of 37816 and Cinebench R23 multicore score of 14769, are more than adequate for the flight simulator’s physics and AI computations. The 14 threads (14 cores with no hyper-threading) handle the game’s background tasks without introducing stutter, as shown by the 1080p Medium minimum FPS of 70, which is only 12 FPS below the average. At higher resolutions, the CPU utilization likely decreases, and the system becomes purely GPU-bound, making the RTX 5050’s 2560 shading units and 80 tensor cores the deciding factor for playability.

How This Combo Ranks

Among all 3,714 tested CPU and GPU combinations in Microsoft Flight Simulator, this specific pairing ranks 2,278th. This places the combo in the bottom 38.7% of tested configurations, indicating that while it can run the game, it is far from the top-tier setups that dominate the leaderboard. The rank reflects the RTX 5050’s relatively modest standing in the GPU hierarchy, where it sits in the 66th percentile of all GPUs with an average benchmark score of 21,035. The CPU, in contrast, is in the 89th percentile of all CPUs with an average score of 46,062, suggesting that the processor is not the limiting factor in this pairing.

The 2,278th rank out of 3,714 means that 1,436 other combos perform better in this specific game. This is a below-median result, but it is important to note that the flight simulator is notoriously demanding on graphics hardware due to its streaming terrain and complex lighting. The combo’s ranking is heavily influenced by the 4K results, where the RTX 5050 falls below 60 FPS on every preset except Low. At 1080p, the combo would rank significantly higher, as the 62 FPS average on High settings is competitive with mid-range systems. The data suggests that users targeting 4K should look elsewhere, but for 1080p and 1440p gaming, this combo delivers acceptable performance.

Similar Performance Alternatives

The nearest rivals for the Intel Core Ultra 5 235 provide context for CPU performance. The AMD Ryzen AI 9 HX 375 has an average score of 46,030, which is 0.1% higher than the Core Ultra 5 235’s 46,062, indicating nearly identical CPU-bound performance. The Intel Core i9-13900HX scores 46,098, just 0.1% higher, while the AMD EPYC 4364P and AMD EPYC 7303 score 45,970 and 45,960 respectively, both 0.2% lower. These deltas are negligible, meaning any of these CPUs would produce statistically identical frame rates in CPU-bound scenarios, such as 1080p Low settings where the combo hits 106 FPS.

For the GPU, the nearest rivals show a wider spread but still within a few percentage points. The AMD Radeon RX Vega M GL scores 21,153, which is 0.6% higher than the RTX 5050’s 21,035. The AMD Radeon HD 8970M scores 21,237, 1% higher, while the AMD Radeon RX 5600 XT scores 20,713, 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21,379, 1.6% higher. These differences translate to at most a 1-2 FPS variation at any given setting, so users with any of these GPUs would experience nearly identical performance in Microsoft Flight Simulator. The RX 5600 XT, being 1.6% slower, would likely push the 1080p High average from 62 FPS down to approximately 61 FPS, still playable, while the RTX A4000 Mobile might edge closer to 63 FPS.

Best Settings per Resolution

At 3840x2160, the only preset that maintains an average of 60 FPS or higher is Low, with an average of 63 FPS. Medium falls short at 49 FPS, and High and Ultra are not viable at 37 and 35 FPS respectively. For users with a 4K display, Low settings are the sole option, providing a playable but visually reduced experience. The 63 FPS average does not include a minimum FPS figure, but the Medium preset’s minimum of 42 FPS suggests that Low may also experience dips below 60 during heavy scenery loads.

At 2560x1440, the best playable preset is Medium, with an average of 66 FPS and a minimum of 57 FPS. While the average clears the threshold, the minimum falls below 60, meaning users may notice occasional stutter. Low settings average 85 FPS, providing a smoother experience with a wide margin, but for maximum visual fidelity while staying near the target, Medium is the recommended choice. High and Ultra at 1440p are not playable, averaging 50 and 48 FPS respectively.

At 1920x1080, the best playable preset is High, with an average of 62 FPS. This preset offers a good balance of visual quality and performance, though the lack of a minimum FPS figure leaves some uncertainty about frame consistency. Medium averages 82 FPS, providing a more comfortable margin above the threshold with a minimum of 70 FPS, making it the safer choice for users who prioritize smoothness. Ultra averages 59 FPS, which is just below the playable threshold, so it is not recommended despite being close.

The Verdict

The verdict by resolution is clear: this system can run Microsoft Flight Simulator at 60 FPS or higher, but only under specific conditions. At 3840x2160, the only playable setting is Low, which averages 63 FPS. This is a marginal pass, and the lack of minimum FPS data means users should expect occasional dips below 60. At 2560x1440, the system is playable on both Low (85 FPS) and Medium (66 FPS) presets, with Medium being the best visual option that still averages above 60, though its 57 FPS minimum indicates it is not perfectly stable. At 1920x1080, the system is playable on Low (106 FPS), Medium (82 FPS), and High (62 FPS) presets, with High being the best visual setting that maintains an average above 60.

The data shows that this combo is a solid 1080p machine for this game, a capable 1440p machine with settings compromises, and a marginal 4K machine limited to the lowest preset. Users with 1080p displays can enjoy the game with high visual fidelity, while 1440p users should stick to Medium to avoid frequent frame drops. 4K users will need to accept significant visual compromises to maintain playability. The combo’s 2,278th rank out of 3,714 reflects this mixed performance profile, with the RTX 5050’s 66th GPU percentile being the primary bottleneck.

FAQ

Q: What is the highest preset that maintains 60 FPS on average at 1920x1080?

A: High settings, with an average of 62 FPS. Ultra averages 59 FPS, just below the threshold.

Q: Is the system playable at 4K with any preset?

A: Yes, but only on Low settings, which average 63 FPS. Medium, High, and Ultra all fall below 60 FPS with averages of 49, 37, and 35 FPS respectively.

Q: How does the Intel Core Ultra 5 235 compare to its nearest CPU rival?

A: The AMD Ryzen AI 9 HX 375 scores 0.1% higher, while the Intel Core i9-13900HX scores 0.1% lower. These differences are within 1% and would not produce noticeable FPS changes.

Q: What is the minimum FPS recorded at 2560x1440 Medium settings?

A: The minimum FPS is 57, with an average of 66 and a maximum of 76. This means the system can dip below 60 FPS during demanding scenes.

Q: Which GPU rival is closest in performance to the RTX 5050?

A: The AMD Radeon RX Vega M GL scores 0.6% higher, while the AMD Radeon RX 5600 XT scores 1.6% lower. All nearest rivals are within 1.6% of the RTX 5050’s average score.

Q: What is the best playable preset at 2560x1440?

A: Medium settings, with an average of 66 FPS. Low settings average 85 FPS, but Medium offers better visuals while still averaging above 60.