Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Microsoft Flight Simulator
Flight Simulation 2020

Microsoft Flight Simulator

90%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
127 FPS
Ultra 1080p Measured
71 FPS

1440p (2K / QHD)

Low 1440p Measured
103 FPS
Ultra 1440p Measured
57 FPS

4K (Ultra HD)

Low 4K Measured
76 FPS
Ultra 4K Measured
42 FPS
13.5ms Frame Time
20ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,444
Your CPU 79,097
Graphics Card
Required 27,967
Your GPU 26,331

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 42 44 59 76
1440p QHD 57 60 80 103
1080p Full HD 71 74 99 127

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 74
1920x1080 Low 127
1920x1080 Medium 99
1920x1080 Ultra 71
2560x1440 High 60
2560x1440 Low 103
2560x1440 Medium 80
2560x1440 Ultra 57
3840x2160 High 44
3840x2160 Low 76
3840x2160 Medium 59
3840x2160 Ultra 42

Performance Analysis: Microsoft Flight Simulator on Your System

The Intel Core i9-14900K paired with the NVIDIA GeForce RTX 5060 presents a curious case for Microsoft Flight Simulator, a title known for its demanding simulation workload. The measured data reveals a system that is capable but requires careful settings management, particularly at higher resolutions. The combination of a top-tier 24-core CPU with a mid-range Blackwell GPU yields a performance profile that shifts from being GPU-bound at 4K to increasingly CPU-reliant as resolution drops, though the RTX 5060's 8 GB memory and 128-bit bus become limiting factors at the highest settings.

Measured FPS Breakdown

The benchmark results for this combo show a clear performance hierarchy across resolutions and presets, with average frame rates ranging from a high of 127 FPS at 1080p Low to a low of 42 FPS at 4K Ultra. At 1920x1080, the system delivers strong performance across the board: Low settings produce an average of 127 FPS, Medium reaches 99 FPS with a minimum of 84 FPS and a maximum of 114 FPS, High drops to 74 FPS, and Ultra maintains a respectable 71 FPS average. The absence of min/max values for the High and Ultra presets suggests the telemetry captured only averages for those configurations.

Moving to 2560x1440, the data shows a predictable step down in performance. Low settings deliver 103 FPS average, Medium produces 80 FPS with a minimum of 68 FPS and a maximum of 92 FPS, High falls to exactly 60 FPS, and Ultra dips below the 60 FPS threshold to 57 FPS. The 1440p Medium preset shows the tightest min/max spread of any measured configuration, indicating consistent frame pacing at that setting.

At 3840x2160, the RTX 5060 begins to struggle with the simulation's demands. Low settings still achieve a playable 76 FPS average, but Medium drops to 59 FPS with a minimum of 50 FPS and a maximum of 68 FPS. High settings fall to 44 FPS, and Ultra bottoms out at 42 FPS. The gap between Low and Medium at 4K is 17 FPS, while the gap between Medium and High is 15 FPS, suggesting a steep scaling curve as graphical complexity increases.

Best Settings per Resolution

For 1920x1080, the Ultra preset is the clear choice, as it delivers an average of 71 FPS, which clears the 60 FPS playability threshold by a healthy margin. This means users can experience the full visual fidelity of Microsoft Flight Simulator at 1080p without compromising on frame rate.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is High, which achieves exactly 60 FPS on average. This is a marginal pass, leaving little headroom for complex scenes or heavy weather effects, but it does meet the playability criterion. The Ultra preset at 1440p falls short at 57 FPS, so High is the recommended ceiling.

For 3840x2160, only the Low preset manages to stay above 60 FPS, producing an average of 76 FPS. Medium at 4K sits at 59 FPS, just below the threshold, while High and Ultra are significantly lower at 44 FPS and 42 FPS respectively. The data indicates that 4K gaming with this combo requires substantial settings compromises to maintain smooth gameplay.

Similar Performance Alternatives

Looking at the nearest rivals for the components, the CPU and GPU each have close competitors that would yield similar system-level behavior. For the Intel Core i9-14900K, the nearest rival is the Intel Core i9-14900KF, which has an average benchmark score of 79371, a mere 0.3% difference from the 14900K's 79097. This makes the KF variant effectively interchangeable in gaming workloads. The Intel Core Ultra 9 290HX Plus scores 79574, 0.6% higher, while the AMD EPYC 7413 reaches 80041, 1.2% ahead — all within a tight performance band.

On the GPU side, the NVIDIA GeForce RTX 5060's closest rival is the AMD Radeon 860M with an average score of 26401, just 0.3% off the RTX 5060's 26331. The NVIDIA GeForce MX550 also sits nearby at 26421, also 0.3% behind. The AMD Radeon RX 5700 XT 50th Anniversary scores 26553, which is 0.8% higher, while the AMD Radeon RX 6750 XT trails at 26011, 1.2% lower. These delta values suggest that swapping the RTX 5060 for any of these cards would produce nearly identical frame rates in Microsoft Flight Simulator, with differences well within run-to-run variance.

The Verdict

Microsoft Flight Simulator is playable with this combo, but the experience varies dramatically by resolution. At 1920x1080, the system clears 60 FPS at every tested preset, including Ultra at 71 FPS. This is the resolution where the combo fully shines, offering both high fidelity and smooth performance. At 2560x1440, the system just barely reaches playability at High settings with exactly 60 FPS, while Ultra falls short at 57 FPS. The verdict data lists High, Low, and Medium as playable at 1440p, with High being the best settings choice.

At 3840x2160, only Low settings are considered playable, delivering 76 FPS. The Medium preset at 59 FPS misses the 60 FPS threshold by a single frame, making it a borderline case. For users targeting 4K, this combo requires significant graphical compromises, and the 8 GB memory capacity of the RTX 5060 may contribute to the steep performance drop at higher resolutions. The overall combo rank of 1647 out of 3714 tested combinations places this system in the upper-middle tier, indicating that while it is not a top performer, it outperforms the majority of tested configurations.

CPU and GPU Roles

The interplay between the Intel Core i9-14900K and the NVIDIA GeForce RTX 5060 becomes evident when analyzing the scaling across resolutions. At 3840x2160, the GPU is clearly the bottleneck. The frame rate differences between presets are substantial — Low at 76 FPS versus Ultra at 42 FPS — which points to the RTX 5060's raw compute and memory bandwidth being the limiting factors. The 448.0 GB/s bandwidth and 8 GB GDDR7 memory are insufficient to feed the high-resolution textures and geometry that Ultra settings demand.

At 2560x1440, the balance shifts. The gap between Low and Ultra narrows to 46 FPS (103 versus 57), and the system begins to show CPU influence. The i9-14900K's 24 cores and 32 threads, combined with its 36 MB of shared L3 cache, provide ample headroom for the simulation's physics and AI calculations. However, the 60 FPS ceiling at High settings suggests the GPU is still the primary constraint at this resolution.

At 1920x1080, the CPU's strength becomes more apparent. The 127 FPS at Low settings indicates that the i9-14900K can push well beyond what the RTX 5060 can render at higher presets. The relatively small gap between High (74 FPS) and Ultra (71 FPS) at 1080p suggests that the CPU is doing heavy lifting, while the GPU has enough headroom to handle the incremental load. This pattern — where the CPU matters more at lower resolutions and the GPU dominates at higher resolutions — is typical of simulation games, where draw calls and physics calculations are CPU-intensive.

FAQ

Q: Can this PC run Microsoft Flight Simulator at Ultra settings?

A: Yes, but only at 1920x1080. The Ultra preset delivers an average of 71 FPS at 1080p. At 2560x1440, Ultra drops to 57 FPS, and at 3840x2160, it falls to 42 FPS.

Q: What is the best resolution for this combo?

A: The data shows 1920x1080 is the sweet spot, with all presets clearing 60 FPS. At 2560x1440, only High and below are playable, while at 4K, only Low settings meet the 60 FPS threshold.

Q: How does the RTX 5060 compare to its nearest GPU rival?

A: The AMD Radeon 860M is the closest rival, with an average benchmark score of 26401, just 0.3% different from the RTX 5060's 26331. Performance in Flight Simulator would be nearly identical.

Q: Is the i9-14900K CPU a bottleneck for the RTX 5060?

A: At 1080p, the CPU appears to have significant headroom, as Low settings reach 127 FPS. At 4K, the GPU is clearly the limiting factor, with the CPU's performance becoming less relevant.

Q: What FPS can I expect at 2560x1440 with Medium settings?

A: The Medium preset at 1440p delivers an average of 80 FPS, with a minimum of 68 FPS and a maximum of 92 FPS, providing comfortable headroom above the 60 FPS playability threshold.

Q: How does this combo rank among all tested systems?

A: This combo ranks 1647 out of 3714 tested combinations, placing it in the upper half of all systems tested for Microsoft Flight Simulator.

How This Combo Ranks

The Intel Core i9-14900K and NVIDIA GeForce RTX 5060 combination ranks 1647 out of 3714 tested combos, which places it in the 55th percentile of all systems evaluated for Microsoft Flight Simulator. This is a solid mid-pack result, reflecting the imbalance between the high-end CPU and the mid-range GPU. The CPU ranks in the 95th percentile among all CPUs, while the GPU sits in the 72nd percentile among all GPUs. This gap explains the system's behavior: the i9-14900K is capable of much higher frame rates than the RTX 5060 can deliver, particularly at higher resolutions. The 1080p results — particularly the 74 FPS at High settings — likely represent the practical ceiling of this GPU in this game, while the 4K results show where the GPU's limitations become most pronounced. For users considering this combo, the data suggests that it is best suited for 1080p and 1440p gaming, with 4K requiring substantial settings reductions to maintain playability.