Instant compatibility check with FPS benchmarks and optimization tips
Microsoft Flight Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 33 | 35 | 47 | 60 |
| 1440p QHD | 45 | 48 | 63 | 81 |
| 1080p Full HD | 56 | 59 | 79 | 101 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Microsoft Flight Simulator on Your System
The Intel Core i7-14700F and AMD Radeon RX 7600 combination presents a specific performance profile in Microsoft Flight Simulator, where the CPU’s strong multi-threaded capabilities and the GPU’s mid-range positioning interact differently across resolutions. Benchmark data indicates this pairing is measured, not estimated, with the CPU holding a 91st percentile rank among all processors and the GPU sitting at the 57th percentile among all graphics cards. The system’s overall rank in this game is 2527 out of 3714 tested combinations, placing it in the lower-middle tier of all recorded configurations.
Similar Performance Alternatives
The CPU’s nearest performance rivals, based on average benchmark scores, include the Intel Xeon 6505P, which is essentially identical with a -0.2% delta, and the Intel Xeon Phi 7290 at +0.3%. The AMD Ryzen 9 7900X is also close at +0.6%, and the AMD EPYC 7313P trails slightly at +0.8%. These rivals represent the compute ceiling for this processor; in practical gaming terms, the Ryzen 9 7900X would deliver comparable frame pacing in CPU-bound scenarios, though the Xeon parts are server-oriented and would behave differently in real workloads.
On the GPU side, the Radeon RX 7600’s nearest rivals are the NVIDIA GeForce RTX 3050 OEM at -0.2%, the AMD Radeon Pro 560X at +0.6%, the AMD Radeon 680M at -0.7%, and the NVIDIA GeForce GTX 660 Ti at +0.7%. The RTX 3050 OEM is the most relevant gaming comparison, as it would produce nearly identical frame rates in this title. The Radeon 680M, being an integrated solution, would struggle more with memory bandwidth, while the GTX 660 Ti is an older architecture with different feature support. For users considering alternatives, the data shows that swapping to any of these GPUs would yield within 1% of the same average benchmark score, meaning the visual output in Flight Simulator would be virtually indistinguishable.
CPU and GPU Roles
The measured FPS data reveals a clear division of labor between the CPU and GPU across resolutions. At 1920x1080, the system achieves 101 FPS on Low settings, which drops to 79 FPS on Medium, 59 FPS on High, and 56 FPS on Ultra. The gap between Low and Medium is 22 FPS, while the gap between Medium and High is 20 FPS, suggesting that the GPU is the primary limiter even at this resolution. The CPU’s 20 cores and 28 threads provide ample headroom, as evidenced by the strong multi-core benchmarks (35122 in Cinebench R23 multi-core), so the frame rate drops are attributable to the GPU’s rendering load.
At 2560x1440, the pattern shifts slightly. Low settings produce 81 FPS, Medium drops to 63 FPS, High falls to 48 FPS, and Ultra bottoms out at 45 FPS. The scaling from 1080p to 1440p at Low settings is a 20 FPS reduction, which is a 20% loss. This indicates that the GPU is increasingly stressed as pixel count rises, but the CPU still manages to feed the GPU adequately. At 3840x2160, the GPU becomes the dominant constraint: Low settings yield 60 FPS, Medium drops to 47 FPS, High falls to 35 FPS, and Ultra produces 33 FPS. The resolution scaling from 1440p to 4K at Low settings is a 21 FPS loss, and the CPU’s role diminishes further because the GPU cannot process frames fast enough to saturate the processor’s capacity.
The data shows that the CPU matters most at lower resolutions and lower presets, where its high single-thread score (4958 in Cinebench R23 single-core) helps maintain high frame rates. At 1080p Low, the system nearly doubles the 60 FPS threshold, which would not be possible if the CPU were the bottleneck. Conversely, at 4K Ultra, the GPU’s 8 GB memory and 2048 shading units are overwhelmed, and the CPU’s performance becomes irrelevant because the GPU is the limiting factor. The scaling between presets at each resolution confirms this: at 1080p, the Ultra-to-Low ratio is 56/101 (0.55), while at 4K it is 33/60 (0.55), indicating similar GPU-bound behavior at both extremes.
Measured FPS Breakdown
At 1920x1080, the measured data provides a complete picture. Low settings deliver an average of 101 FPS, which is the highest recorded value for this combination. Medium settings produce 79 FPS average, with a minimum of 67 FPS and a maximum of 90 FPS, showing a stable range. High settings drop to 59 FPS average, which is just below the 60 FPS playable threshold. Ultra settings yield 56 FPS average, with no minimum or maximum recorded. The Medium preset is the only one that stays comfortably above 60 FPS at this resolution, and its 67 FPS minimum ensures that even demanding scenes remain playable.
At 2560x1440, the same pattern holds but with lower absolute numbers. Low settings achieve 81 FPS average, which is still well above the threshold. Medium settings produce 63 FPS average, with a minimum of 54 FPS and a maximum of 73 FPS. The 54 FPS minimum indicates that some scenes dip below the playable threshold, but the average remains acceptable. High settings fall to 48 FPS average, and Ultra drops to 45 FPS, both of which are below the 60 FPS target. The Medium preset is the best playable option here, even though its minimum can occasionally drop below 60 FPS.
At 3840x2160, the system struggles. Low settings produce exactly 60 FPS average, which meets the threshold but leaves no headroom. Medium settings average 47 FPS, with a minimum of 40 FPS and a maximum of 54 FPS, showing significant variability. High settings fall to 35 FPS average, and Ultra drops to 33 FPS. The Low preset is the only playable option at 4K, and its 60 FPS average is precise but fragile. The Medium preset’s 40 FPS minimum would result in visible stuttering during dense scenery or weather effects. The data shows a consistent pattern: each resolution has one or two playable presets, and the GPU’s performance ceiling is reached at 4K.
How This Combo Ranks
The combination ranks 2527 out of 3714 tested configurations for this game, placing it in the 32nd percentile of all recorded systems. This means that roughly 68% of tested combos perform better in Microsoft Flight Simulator, while 32% perform worse. The rank reflects the GPU’s mid-tier status more than the CPU’s high-tier compute. The CPU alone sits at the 91st percentile, indicating it is among the top 9% of all processors, but the GPU’s 57th percentile drags the overall system down.
In practical terms, this rank means the system is capable of running the game but not at high settings or high resolutions. The CPU’s powerful multi-threaded performance (41317 in PassMark multithread) would benefit other workloads, but in this flight simulator, the GPU’s 8 GB memory and 128-bit memory bus (288.0 GB/s bandwidth) limit the texture and geometry throughput. The rank relative to other combos suggests that users with similar GPUs but weaker CPUs might see slightly lower frame rates, while those with stronger GPUs would see significantly higher performance. The data confirms that the GPU is the limiting factor, as the CPU’s benchmarks are far above what this game requires for its playable presets.
FAQ
Q: Can this system run Microsoft Flight Simulator at 1080p with Medium settings?
A: Yes. The measured average FPS is 79, with a minimum of 67 and a maximum of 90, all above the 60 FPS playable threshold.
Q: What is the best preset for 1440p gaming with this combo?
A: Medium settings provide the best playable experience, averaging 63 FPS, though the minimum can dip to 54 FPS during heavy scenes.
Q: Is 4K gaming possible with this hardware?
A: Only at Low settings, which average exactly 60 FPS. Medium settings drop to 47 FPS average, and High/Ultra fall below 35 FPS.
Q: How does the CPU compare to its nearest rival, the Ryzen 9 7900X?
A: The i7-14700F scores 0.6% higher in average benchmarks than the Ryzen 9 7900X, making them essentially equal in compute performance.
Q: What GPU would perform similarly to the RX 7600?
A: The NVIDIA GeForce RTX 3050 OEM is the closest rival, with a -0.2% delta in average benchmark scores, meaning frame rates would be nearly identical.
Q: Does the system ever exceed 100 FPS?
A: Yes, at 1080p with Low settings, the average is 101 FPS, which is the only preset/resolution combination above 100 FPS.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 79 FPS. This provides a comfortable margin above the threshold, and even the 67 FPS minimum ensures consistent playability. Low settings offer even higher performance at 101 FPS, but Medium is the optimal balance for visual quality without sacrificing frame rate.
At 2560x1440, the best playable preset is Medium, averaging 63 FPS. This is just above the 60 FPS threshold, and the 54 FPS minimum is acceptable for most scenes. Low settings at 81 FPS would be smoother, but Medium provides better visual fidelity while maintaining an average above the playable threshold.
At 3840x2160, the only playable preset is Low, averaging exactly 60 FPS. This leaves no headroom, and any demanding scene could push the frame rate below the threshold. Medium settings at 47 FPS average are not playable, and High/Ultra are far below. Users at 4K should expect to sacrifice most visual quality to maintain playable frame rates.
The Verdict
This PC can run Microsoft Flight Simulator, but with significant limitations at higher resolutions. At 1920x1080, the system clears the 60 FPS threshold on Low and Medium presets, with Medium being the best choice for visual quality. At 2560x1440, Low and Medium are playable, with Medium averaging 63 FPS, though the minimum dips below 60 FPS. At 3840x2160, only Low settings meet the 60 FPS threshold, averaging exactly 60 FPS with no margin for error. The verdict by resolution is clear: 1080p Medium and 1440p Medium are the best playable options, while 4K requires Low settings. The system is not capable of running High or Ultra presets at any resolution above 1080p, and even at 1080p, High averages 59 FPS, just missing the threshold. For users prioritizing frame rate over visual fidelity, this combo delivers playable performance at 1080p and 1440p, but 4K gaming is only marginally viable at the lowest settings.