Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Microsoft Flight Simulator
Flight Simulation 2020

Microsoft Flight Simulator

64%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
143 FPS
Ultra 1080p Measured
78 FPS

1440p (2K / QHD)

Low 1440p Measured
115 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
82 FPS
Ultra 4K Measured
48 FPS
11.8ms Frame Time
18ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,444
Your CPU 13,494
Graphics Card
Required 27,967
Your GPU 29,945

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 48 50 63 82
1440p QHD 63 65 87 115
1080p Full HD 78 85 112 143

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 85
1920x1080 Low 143
1920x1080 Medium 112
1920x1080 Ultra 78
2560x1440 High 65
2560x1440 Low 115
2560x1440 Medium 87
2560x1440 Ultra 63
3840x2160 High 50
3840x2160 Low 82
3840x2160 Medium 63
3840x2160 Ultra 48

Performance Analysis: Microsoft Flight Simulator on Your System

The Intel Core i3-12100F and NVIDIA GeForce RTX 3070 Ti combination delivers a distinctly split personality in Microsoft Flight Simulator, where the GPU clearly dominates performance across most settings, but the CPU’s four physical cores become a limiting factor at lower resolutions and higher frame rates. The measured data shows this pairing ranks 1352nd out of 3714 tested combos in this game, placing it in the upper third of all configurations. At 1920x1080, the system achieves 85.3 FPS on High settings, which is notably strong, yet the jump to 142.6 FPS on Low reveals that the CPU is holding back the RTX 3070 Ti from reaching its full potential at this resolution.

Similar Performance Alternatives

The CPU and GPU each have near-neighbors that would produce nearly identical frame rates in this game. For the Intel Core i3-12100F, benchmark averages place it within 1.1% of several comparable processors. The Intel Core 3 N355 scores 13492, a 0% delta from the i3-12100F’s 13494 average, meaning the two would behave almost interchangeably in CPU-bound scenarios. The Intel Core i5-9500 sits 0.3% behind with a score of 13452, while the Intel Core 5 120UL is 0.7% ahead at 13594. The Intel Core i7-1250U trails by 1.1% at 13351. In practice, swapping the i3-12100F for any of these would shift frame rates by only a fraction of a percent, so the overall experience in Microsoft Flight Simulator would remain effectively unchanged.

On the GPU side, the RTX 3070 Ti’s average benchmark score of 29945 is bracketed by several close competitors. The NVIDIA GeForce RTX 5070 Mobile scores 29928, a 0.1% delta, making it the nearest match. The AMD Radeon RX 6800 is 0.5% faster at 30095, while the NVIDIA GeForce RTX 2080 Ti comes in 0.5% slower at 29783. The AMD Radeon RX 6700 is 1.6% ahead at 30433. These deltas are small enough that any of these GPUs would produce nearly identical FPS numbers at each resolution and preset combination. For example, at 2560x1440 High settings where the combo achieves 64.9 FPS, swapping to the RX 6800 would yield roughly 65.2 FPS, well within measurement noise.

CPU and GPU Roles

The data reveals a clear division of labor between the two components, with the GPU being the dominant factor at higher resolutions. At 3840x2160, the frame rate scales directly with graphics settings: Low produces 82 FPS, Medium drops to 63 FPS, High falls to 49.8 FPS, and Ultra bottoms out at 47.5 FPS. This pattern shows the RTX 3070 Ti is the primary constraint at 4K, as each increase in preset load directly reduces the average FPS. The CPU’s role becomes more apparent when comparing resolutions at the same settings. At Low settings, the frame rate climbs from 82 FPS at 4K to 114.7 FPS at 1440p, then to 142.6 FPS at 1080p. This 74% increase from 4K to 1080p at Low settings indicates the CPU begins to matter more as the GPU has less work to do.

The scaling at Medium settings tells a similar story: 63 FPS at 4K, 87.4 FPS at 1440p, and 111.9 FPS at 1080p. The gap between 1440p and 1080p narrows at higher presets, suggesting the GPU becomes the bottleneck again. At High settings, the difference between 1440p (64.9 FPS) and 1080p (85.3 FPS) is 31%, while at Ultra, the gap is smaller: 63.1 FPS at 1440p versus 78.3 FPS at 1080p, a 24% difference. This compression at higher presets indicates that the i3-12100F’s four cores and eight threads are sufficient to feed the GPU at 60 FPS targets, but they limit maximum frame rates in lighter loads where the RTX 3070 Ti could otherwise push higher numbers.

Measured FPS Breakdown

At 1920x1080, the combination delivers its strongest performance across all presets. Low settings produce an average of 142.6 FPS, which is the highest frame rate recorded for this combo in any configuration. Medium settings drop to 111.9 FPS, High settings yield 85.3 FPS, and Ultra settings maintain 78.3 FPS. All four presets clear the 60 FPS playable threshold by a wide margin, with even the most demanding Ultra preset providing 30% headroom above the threshold. The spread from Low to Ultra is 64.3 FPS, showing that the GPU has substantial performance reserves at this resolution.

Moving to 2560x1440, the frame rates remain playable across every preset but with a tighter margin at the top end. Low settings average 114.7 FPS, Medium settings reach 87.4 FPS, High settings hit 64.9 FPS, and Ultra settings manage 63.1 FPS. The difference between High and Ultra is only 1.8 FPS, suggesting that the Ultra preset is only slightly more demanding than High at this resolution. The minimum observed average is 63.1 FPS at Ultra, which still clears the 60 FPS threshold with 5% headroom.

At 3840x2160, the picture changes dramatically. Low settings average 82 FPS, which is playable, and Medium settings average 63 FPS, which just clears the threshold. However, High settings drop to 49.8 FPS, and Ultra settings fall to 47.5 FPS, both of which fail to reach 60 FPS. The drop from Medium to High is 13.2 FPS, indicating a steep performance cliff at 4K. The Ultra preset is only 2.3 FPS slower than High, meaning the GPU is heavily saturated at both settings. This resolution exposes the RTX 3070 Ti’s limits, as even the High preset cannot maintain a smooth 60 FPS experience.

FAQ

Q: Can this combo run Microsoft Flight Simulator at 1920x1080 on Ultra settings?

A: Yes, the measured average FPS at 1920x1080 Ultra is 78.3 FPS, which is well above the 60 FPS playable threshold. All four presets at this resolution clear 60 FPS, with Low at 142.6 FPS, Medium at 111.9 FPS, and High at 85.3 FPS.

Q: What is the best preset at 2560x1440 that stays above 60 FPS?

A: The Ultra preset at 2560x1440 averages 63.1 FPS, which is the most demanding setting that remains playable. High settings produce 64.9 FPS, Medium settings yield 87.4 FPS, and Low settings reach 114.7 FPS.

Q: Is 4K gaming possible with this hardware?

A: Only at Low and Medium presets. At 3840x2160, Low averages 82 FPS and Medium averages 63 FPS, both of which pass the 60 FPS threshold. High and Ultra presets fail, averaging 49.8 FPS and 47.5 FPS respectively.

Q: How much does the CPU limit performance at 1080p?

A: The frame rate at 1080p Low is 142.6 FPS, which is 74% higher than the 82 FPS at 4K Low. This scaling suggests the i3-12100F becomes a limiting factor at 1080p, as the GPU could likely render more frames if the CPU could feed it faster.

Q: Which component is the bottleneck at 4K Ultra settings?

A: The GPU is clearly the bottleneck at 3840x2160 Ultra, where the average FPS drops to 47.5. The fact that High and Ultra produce nearly identical frame rates (49.8 FPS vs 47.5 FPS) indicates the RTX 3070 Ti is saturated and cannot handle the pixel load.

Q: How does this combo rank compared to all tested configurations?

A: This pairing ranks 1352nd out of 3714 total combos tested in Microsoft Flight Simulator, placing it in the upper 36% of all configurations. This is a solid position given the CPU’s modest specs.

How This Combo Ranks

The combination ranks 1352nd out of 3714 tested configurations in Microsoft Flight Simulator, which places it in the 36th percentile of all combos. This ranking reflects a system that handles the game well at most settings but is not a top-tier performer. The rank is driven primarily by the GPU’s strong benchmark scores, as the RTX 3070 Ti sits in the 75th percentile of all GPUs, while the i3-12100F is in the 68th percentile of all CPUs. The CPU’s lower percentile relative to the GPU explains why the combo underperforms its GPU-only ranking at lower resolutions where CPU load is higher.

The ranking also indicates that roughly two-thirds of tested combos perform better in this game, which is expected given the i3-12100F’s budget positioning. However, the actual measured FPS numbers tell a more nuanced story: at 1080p and 1440p, the combo delivers playable frame rates across all presets, and even at 4K, two presets are playable. The rank of 1352 reflects the average performance across all tested scenarios, but the real-world experience depends heavily on the user’s resolution and settings choices.

Best Settings per Resolution

At 1920x1080, the best settings are Ultra, which averages 78.3 FPS. This preset is the most demanding available and still provides 30% headroom above the 60 FPS threshold. All lower presets also work, but Ultra offers the highest visual quality without sacrificing smoothness.

At 2560x1440, the best settings are also Ultra, averaging 63.1 FPS. This is the most demanding preset that remains playable, with the average just 3.1 FPS above the 60 FPS threshold. The margin is slim, but the data confirms that Ultra is achievable at this resolution.

At 3840x2160, the best settings are Medium, which averages 63 FPS. This is the highest preset that clears the 60 FPS threshold, with Low also playable at 82 FPS. High and Ultra presets fall short, averaging 49.8 FPS and 47.5 FPS respectively, so they should be avoided for smooth gameplay.

The Verdict

This PC can run Microsoft Flight Simulator, but the experience depends entirely on resolution. At 1920x1080, the system is fully playable at every preset, with Ultra settings delivering 78.3 FPS and Low settings reaching 142.6 FPS. At 2560x1440, the combo also clears 60 FPS at all presets, with Ultra at 63.1 FPS being the highest playable option. At 3840x2160, the system is only playable at Low and Medium settings, achieving 82 FPS and 63 FPS respectively. High and Ultra presets at 4K fall below the 60 FPS threshold, making them unsuitable for smooth gameplay. The verdict by resolution confirms this: 1080p and 1440p offer full preset flexibility, while 4K requires dropping to Medium or lower to maintain playability. For users targeting 1080p or 1440p, this combination delivers a consistently smooth experience with room to spare; for 4K, it requires compromises in visual fidelity to stay above 60 FPS.