Instant compatibility check with FPS benchmarks and optimization tips
Microsoft Flight Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 32 | 28 | 42 | 52 |
| 1440p QHD | 39 | 45 | 57 | 72 |
| 1080p Full HD | 49 | 54 | 72 | 91 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Microsoft Flight Simulator on Your System
This analysis examines how the Intel Core i3-12100F and AMD Radeon RX 6600 combination performs in Microsoft Flight Simulator, based on measured frame rate data. The pairing represents a mid-range desktop build with a 4-core, 8-thread Alder Lake processor and an RDNA 2.0 graphics card with 8 GB of GDDR6 memory. The benchmark results, gathered at three resolutions across four presets, reveal a system that is highly sensitive to both resolution and graphics settings, with clear boundaries for playable performance.
Similar Performance Alternatives
The CPU and GPU in this combination each sit near specific rivals in their respective benchmark hierarchies, meaning the overall system behavior would closely mirror other pairings built around those equivalents.
CPU-side equivalents: The Intel Core i3-12100F achieves an average benchmark score of 13494, placing it in the 68th percentile of all tested CPUs. Its nearest rival is the Intel Core 3 N355, which scores 13492 — a delta of 0% — making these two processors effectively interchangeable in synthetic workloads. The Intel Core i5-9500 trails by just 0.3% with a score of 13452, while the Intel Core 7 1250U sits 1.1% behind at 13351. Interestingly, the Intel Core 5 120UL scores 13594, which is 0.7% higher than the i3-12100F, placing it as a slightly faster alternative in this performance band. For gaming, these rival CPUs would produce nearly identical frame rates in Microsoft Flight Simulator, as the game's demands at these settings are unlikely to differentiate between sub-1% performance deltas.
GPU-side equivalents: The AMD Radeon RX 6600 posts an average benchmark score of 19036, landing in the 63rd percentile of all GPUs. Its closest match is the NVIDIA Quadro K6000 with a score of 19030 (0% delta), meaning a system built around that professional-grade card would deliver essentially the same visual throughput. The NVIDIA GeForce RTX 4050 Mobile scores 19049, just 0.1% higher, while the NVIDIA Tesla K20m is 0.3% behind at 19089. The NVIDIA RTX 2000 Ada Generation trails by 0.4% with 18954. None of these rivals differ by more than a fraction of a percent, so swapping the RX 6600 for any of these would yield nearly identical frame rates in this flight simulator.
When considering the full combo, the data suggests that any pairing of a CPU in the 13351–13594 score range with a GPU in the 18954–19089 range would behave comparably. Builders with the Intel Core i5-9500 or the Core 3 N355 would see the same 60 FPS thresholds at 1080p Medium, while those with the RTX 4050 Mobile or Quadro K6000 would match the RX 6600's performance ceiling at each resolution.
CPU and GPU Roles
The benchmark data shows that Microsoft Flight Simulator scales heavily with resolution, which indicates the GPU is the dominant bottleneck in most configurations. However, the CPU still plays a measurable role at lower resolutions and settings.
At 1920x1080 with Low settings, the system achieves 91 FPS on average. When the resolution jumps to 2560x1440 at Low, the average drops to 71.5 FPS — a 21.4% reduction. Moving to 3840x2160 at Low yields 51.6 FPS, another 27.8% decline from 1440p. This progressive degradation with resolution is characteristic of a GPU-bound workload, where the RX 6600's 224.0 GB/s memory bandwidth and 1792 shading units become the limiting factor.
The CPU's influence becomes apparent when examining the scaling from Low to Medium settings. At 1080p, Low produces 91 FPS while Medium produces 71.9 FPS — a 19.1 FPS penalty for higher detail. At 1440p, the same settings transition yields a drop from 71.5 to 57.1 FPS (14.4 FPS penalty). At 4K, Low to Medium costs 9.5 FPS (51.6 to 42.1). The diminishing penalty at higher resolutions indicates that as the GPU becomes more saturated, the incremental cost of each setting is relatively smaller in absolute terms, but the CPU's single-thread performance (Cinebench R23 single-core score of 1674) is still sufficient to feed the GPU at 1080p Low.
At Ultra settings, the i3-12100F's four cores begin to show limitations. The 1080p Ultra result of 48.6 FPS is only 4.9 FPS lower than 1440p Ultra's 38.9 FPS, suggesting that beyond Medium, the CPU's thread scheduling for the game's complex simulation logic (which includes weather, terrain, and flight physics) starts to constrain performance. The GPU still matters — 4K Ultra drops to 31.9 FPS — but the gap between 1080p and 1440p at Ultra is narrower than at Low, reinforcing that the CPU is a co-bottleneck at higher presets.
Best Settings per Resolution
The measured data identifies the most demanding preset that maintains an average of at least 60 FPS at each resolution.
1920x1080: The best playable setting is Medium, which averages 71.9 FPS. This clears the 60 FPS threshold by 11.9 frames. Low settings run faster at 91 FPS, but Medium offers the highest visual fidelity while staying comfortably above the playability line. High settings fall short at 53.5 FPS, and Ultra drops to 48.6 FPS.
2560x1440: Only Low settings achieve playable performance, averaging 71.5 FPS. Medium falls to 57.1 FPS, just below the 60 FPS target, while High averages 45.1 FPS and Ultra 38.9 FPS. The step from Low to Medium costs 14.4 FPS, which is too steep to remain playable.
3840x2160: No settings preset clears 60 FPS. The best result is Low at 51.6 FPS, followed by Medium at 42.1 FPS, Ultra at 31.9 FPS, and High at 28.4 FPS. Even the lowest preset misses the playability threshold by 8.4 FPS.
The Verdict
This PC can run Microsoft Flight Simulator, but only within specific resolution and settings boundaries. The verdict data confirms that 1920x1080 is the primary playable resolution, with Medium settings delivering 71.9 FPS on average. At 2560x1440, the system barely remains playable, but only on Low settings with 71.5 FPS — a fragile margin that would likely dip below 60 FPS during busy scenes over dense cities or complex weather. At 3840x2160, no settings preset achieves the 60 FPS threshold; the closest is Low at 51.6 FPS, which is playable in a technical sense but falls short of the defined playability standard.
For users prioritizing visual quality, 1080p Medium is the sweet spot. For those wanting higher resolution at 1440p, the Low preset is the only viable option, and it comes with significant graphical compromises such as reduced draw distances and simpler textures. The 4K resolution is effectively off the table for smooth gameplay with this hardware combination.
Measured FPS Breakdown
The following table details the exact average frame rates recorded for each resolution and settings preset. Minimum and maximum FPS values were not captured in the data, so only averages are presented.
| Resolution | Settings | Avg FPS |
|------------|----------|---------|
| 3840x2160 | High | 28.4 |
| 3840x2160 | Low | 51.6 |
| 3840x2160 | Medium | 42.1 |
| 3840x2160 | Ultra | 31.9 |
| 2560x1440 | High | 45.1 |
| 2560x1440 | Low | 71.5 |
| 2560x1440 | Medium | 57.1 |
| 2560x1440 | Ultra | 38.9 |
| 1920x1080 | High | 53.5 |
| 1920x1080 | Low | 91.0 |
| 1920x1080 | Medium | 71.9 |
| 1920x1080 | Ultra | 48.6 |
The data reveals a consistent pattern: each step from Low to Medium to High to Ultra extracts a measurable cost. At 1080p, the spread from Low (91 FPS) to Ultra (48.6 FPS) is 42.4 FPS. At 1440p, the spread narrows to 32.6 FPS (71.5 to 38.9). At 4K, the spread compresses further to 23.2 FPS (51.6 to 28.4). This compression at higher resolutions confirms the GPU-bound nature of the workload, as the RX 6600's rendering throughput becomes the primary constraint.
How This Combo Ranks
Among all tested hardware combinations for Microsoft Flight Simulator, this pairing of the Intel Core i3-12100F and AMD Radeon RX 6600 ranks 2973 out of 3714 total combos. That places it in the bottom 20% of all tested systems, which is consistent with the measured frame rates — the system only achieves playable performance at 1080p Medium and 1440p Low, while the majority of higher-ranked combinations would likely sustain 60 FPS at higher settings or resolutions.
The rank reflects the combination's overall capability across the full test suite, not just this game. The CPU's 68th percentile standing and the GPU's 63rd percentile standing both contribute to a system that is competent for 1080p gaming but struggles with the demanding simulation workload of Microsoft Flight Simulator. The 4K results, which top out at 51.6 FPS on Low, further depress the ranking relative to systems with more powerful GPUs.
Compared to the nearest rival components, this combo's rank is predictable. A system with the Intel Core 5 120UL (0.7% faster CPU) and the NVIDIA RTX 4050 Mobile (0.1% faster GPU) would score marginally better in aggregate benchmarks, but the frame rate differences in this game would be negligible — likely within 1–2 FPS at each settings preset. The ranking position of 2973 is thus more indicative of the hardware tier than of any specific weakness in this pairing. For its class, the combo delivers exactly what the component benchmarks suggest: a 1080p-oriented gaming experience that can handle Medium settings in Microsoft Flight Simulator, with headroom for less demanding titles.