Instant compatibility check with FPS benchmarks and optimization tips
Microsoft Flight Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 46 | 58 | 73 |
| 1440p QHD | 54 | 58 | 81 | 101 |
| 1080p Full HD | 71 | 76 | 98 | 126 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Microsoft Flight Simulator on Your System
This analysis pairs the AMD Ryzen 9 9950X3D with the NVIDIA GeForce RTX 5060 for Microsoft Flight Simulator, using measured benchmark data to determine playable settings and performance expectations. The data covers three resolutions and four quality presets, with a playability threshold of 60 FPS. The results show a clear pattern: this combination is heavily GPU-limited at higher resolutions, while the CPU's strength becomes apparent only at lower settings and resolutions.
Measured FPS Breakdown
The measured FPS data for this combination reveals a wide performance spread across resolutions and presets. At 1920x1080, the lowest tested resolution, the RTX 5060 delivers an average of 125.5 FPS on Low settings, which drops to 97.5 FPS on Medium, 75.8 FPS on High, and 71.2 FPS on Ultra. The gap between Low and Ultra at this resolution is 54.3 FPS, showing that the GPU can handle the load without the CPU becoming a bottleneck. The 1080p results are the only set where every preset stays comfortably above the 60 FPS threshold.
Moving to 2560x1440, the averages decline across the board. Low settings produce 100.7 FPS, Medium drops to 81 FPS, High falls to 58.3 FPS, and Ultra bottoms out at 54 FPS. The transition from 1080p to 1440p costs roughly 20-25% performance at each preset, which is consistent with the increased pixel count. Notably, High and Ultra at 1440p both fall below the 60 FPS playable threshold, meaning only Low and Medium are viable at this resolution.
At 3840x2160, the RTX 5060's 8 GB memory and 128-bit bus become limiting factors. Low settings yield 72.9 FPS, Medium drops to 58.2 FPS, High falls to 45.5 FPS, and Ultra produces just 42.8 FPS. The drop from Medium to High at 4K is 12.7 FPS, while the drop from High to Ultra is only 2.7 FPS, suggesting that the Ultra preset's additional demands are not scaling linearly — likely hitting memory bandwidth limits. No min or max FPS values were recorded, so the analysis relies solely on averages.
Best Settings per Resolution
The best settings per resolution are determined by the most demanding preset that maintains an average of at least 60 FPS. At 1920x1080, all four presets pass this threshold, so the Ultra preset is the best choice, delivering an average of 71.2 FPS. This leaves headroom above the playable limit, but it is the maximum quality option available at this resolution.
At 2560x1440, the situation changes. High and Ultra both fall below 60 FPS (58.3 and 54 FPS respectively), so the best playable setting is Medium, which averages 81 FPS. This gives a comfortable 21 FPS buffer above the threshold, allowing for some scene complexity without dropping below playable rates. Low is also playable at 100.7 FPS, but Medium offers a substantial visual upgrade for only a 19.7 FPS penalty.
At 3840x2160, only Low settings are playable, with an average of 72.9 FPS. Medium falls to 58.2 FPS, just below the threshold, while High and Ultra are far off at 45.5 and 42.8 FPS respectively. This means 4K users must accept Low quality to maintain smooth performance. The data indicates that the RTX 5060 is not suited for high-fidelity 4K flight simulation with this CPU pairing.
CPU and GPU Roles
The benchmark data shows a clear division of labor between the Ryzen 9 9950X3D and the RTX 5060. The CPU's influence is most visible at 1080p Low, where the system reaches 125.5 FPS — the highest score in the entire dataset. This indicates that the CPU can feed the GPU with enough frames to saturate it at lower resolutions. However, as resolution increases, the GPU becomes the dominant bottleneck. The scaling from 1080p to 4K at Low settings shows a drop from 125.5 to 72.9 FPS, a 42% reduction that is almost entirely attributable to the GPU's rendering load.
The preset scaling further confirms this. At 1080p, moving from Low to Ultra costs 54.3 FPS (125.5 to 71.2), which is a manageable penalty. At 1440p, the same preset change costs 46.7 FPS (100.7 to 54), and at 4K it costs 30.1 FPS (72.9 to 42.8). The absolute FPS loss decreases as resolution rises, but the percentage loss remains significant. This pattern suggests the RTX 5060's 8 GB memory and 448.0 GB/s bandwidth are the limiting factors at high resolutions, not the CPU.
The Ryzen 9 9950X3D's 16 cores and 32 threads, with a 128 MB L3 cache, are more than sufficient for this game. Its benchmark scores — including a Cinebench R23 multicore score of 42018 and a single-core score of 2259 — indicate it can handle the simulation's CPU overhead. However, the data shows that even this powerful CPU cannot compensate for the GPU's limitations at 4K Ultra, where the system only achieves 42.8 FPS. This is a GPU-bound scenario, and the CPU's role is minimal beyond ensuring the GPU has data to process.
How This Combo Ranks
In the benchmark database, this combination of the AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 5060 ranks 1774 out of 3714 tested combos for Microsoft Flight Simulator. This places it in the 47.8th percentile of all combinations, meaning roughly 48% of tested combos perform better and 52% perform worse. The rank reflects a mismatch: the CPU is a top-tier processor (95th percentile vs all CPUs), while the GPU is more mid-range (72nd percentile vs all GPUs).
The CPU's average benchmark score is 75779, placing it in the 95th percentile, with nearest rivals being the AMD Ryzen 7 PRO 9755 (75738, 0.1% slower), AMD Ryzen 7 PRO 9755X3D (75716, 0.1% slower), AMD EPYC 8224P (75582, 0.3% slower), and Intel Core Ultra 9 285 (75488, 0.4% slower). These are all within 0.4% of each other, so the CPU is not a differentiator in this game's performance.
The GPU's average benchmark score is 26331, placing it in the 72nd percentile. Its nearest rivals include the AMD Radeon 860M (26401, 0.3% faster), NVIDIA GeForce MX550 (26421, 0.3% faster), AMD Radeon RX 5700 XT 50th Anniversary (26553, 0.8% faster), and AMD Radeon RX 6750 XT (26011, 1.2% slower). These deltas are small, indicating that the RTX 5060 sits in a tightly clustered performance band. The overall combo rank of 1774 suggests that the GPU's mid-range positioning drags down what would otherwise be a top-tier system.
Similar Performance Alternatives
For users looking at this combo, the nearest CPU rivals offer nearly identical processing performance. The AMD Ryzen 7 PRO 9755 and AMD Ryzen 7 PRO 9755X3D are both within 0.1% of the Ryzen 9 9950X3D's average benchmark score, meaning they would deliver virtually the same FPS in Microsoft Flight Simulator. The AMD EPYC 8224P (0.3% slower) and Intel Core Ultra 9 285 (0.4% slower) are also close enough that any differences would be imperceptible in gameplay. Choosing any of these CPUs would not meaningfully change the measured FPS at any resolution or preset.
On the GPU side, the nearest rivals show a similar pattern. The AMD Radeon 860M and NVIDIA GeForce MX550 are both 0.3% faster than the RTX 5060, while the AMD Radeon RX 5700 XT 50th Anniversary is 0.8% faster. The AMD Radeon RX 6750 XT is 1.2% slower. These deltas are all within a couple of percentage points, so swapping the RTX 5060 for any of these cards would produce nearly identical FPS numbers — likely within 1-2 frames at each preset. The practical takeaway is that this combo's performance profile is not unique; many mid-range GPUs from both AMD and NVIDIA land in the same performance envelope.
FAQ
Q: Can this combo run Microsoft Flight Simulator at 4K with playable framerates?
A: Yes, but only at Low settings. The measured average FPS at 3840x2160 Low is 72.9, which is above the 60 FPS threshold. Medium drops to 58.2, just below playable, while High (45.5) and Ultra (42.8) are not viable.
Q: What is the best quality setting at 1440p for this hardware?
A: Medium settings provide the best balance, with an average of 81 FPS. High (58.3) and Ultra (54) both fall below the 60 FPS playable threshold, so they are not recommended.
Q: Is the Ryzen 9 9950X3D or the RTX 5060 the limiting factor in this game?
A: The data indicates the GPU is the primary bottleneck at higher resolutions and presets. At 1080p Low, the system reaches 125.5 FPS, but at 4K Ultra it drops to 42.8 FPS. The CPU's benchmark scores (95th percentile) far exceed the GPU's (72nd percentile), suggesting the GPU cannot keep up with the CPU's output.
Q: How does this combo rank compared to other tested configurations?
A: It ranks 1774 out of 3714 combos, placing it in the middle of the database. This is despite having a top-tier CPU, which indicates the GPU holds the system back.
Q: What GPU alternatives would perform similarly to the RTX 5060?
A: The AMD Radeon 860M (0.3% faster), NVIDIA GeForce MX550 (0.3% faster), and AMD Radeon RX 5700 XT 50th Anniversary (0.8% faster) are all within 1% of the RTX 5060's average benchmark score. The AMD Radeon RX 6750 XT is 1.2% slower.
Q: At 1080p, which preset should I use if I want the best visuals while staying above 60 FPS?
A: Ultra settings are playable, with an average of 71.2 FPS. This is the most demanding preset that maintains at least 60 FPS at 1920x1080, and it leaves an 11.2 FPS buffer above the threshold.