Instant compatibility check with FPS benchmarks and optimization tips
Microsoft Flight Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 37 | 49 | 63 |
| 1440p QHD | 48 | 50 | 66 | 85 |
| 1080p Full HD | 59 | 62 | 82 | 106 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Microsoft Flight Simulator on Your System
This combo pairs the AMD Ryzen 9 5900X with the NVIDIA GeForce RTX 5050 for Microsoft Flight Simulator. The data shows a system that handles the game well at 1080p and 1440p, but struggles at 4K except on the lowest preset. The measured frame rates provide a clear picture of what to expect across resolutions and settings.
How This Combo Ranks
The combination ranks 2278 out of 3714 tested combos for Microsoft Flight Simulator. That places it in the lower third of all systems tested, which reflects the RTX 5050’s modest performance tier rather than any CPU limitation. The Ryzen 9 5900X sits in the 87th percentile among all CPUs, while the RTX 5050 lands in the 66th percentile among all GPUs.
The ranking makes sense when you consider the game’s demands. Microsoft Flight Simulator is heavily GPU-bound at higher resolutions, and the RTX 5050’s 8 GB frame buffer and 320.0 GB/s bandwidth become limiting factors at 4K. At 1080p, however, the combo performs competitively, with average frame rates above 60 FPS at High settings. The 2278th position reflects the fact that many higher-end GPU combos will outperform this pairing, but it also shows that this system is far from the bottom of the pile.
The CPU’s high percentile ranking (87th) indicates that the processor is not the bottleneck in most scenarios. The Ryzen 9 5900X’s 12 cores and 24 threads provide ample headroom for the game’s simulation logic, which tends to scale well with multi-threaded performance. The GPU, by contrast, is the limiting factor at higher resolutions, as evidenced by the sharp frame rate drops when moving from 1440p to 4K.
CPU and GPU Roles
The data reveals a clear division of labor between the CPU and GPU across resolutions. At 1920x1080, the system achieves 106 FPS on Low, 82 FPS on Medium, and 62 FPS on High. These numbers suggest that the CPU is keeping up well, and the GPU has enough headroom to push decent frame rates. The drop from 106 FPS at Low to 62 FPS at High shows that the GPU is doing progressively more work, but the CPU is not holding things back.
At 2560x1440, the frame rates fall to 85 FPS on Low, 66 FPS on Medium, and 50 FPS on High. The scaling from 1080p to 1440p shows about a 20% reduction in performance at Low settings, which is typical for a resolution increase. The gap between Medium (66 FPS) and High (50 FPS) widens compared to 1080p, indicating that the GPU is becoming more of a limiting factor as pixel count rises.
At 3840x2160, the picture changes dramatically. The system manages 63 FPS on Low, 49 FPS on Medium, and 37 FPS on High. The drop from 1440p to 4K at Medium settings is roughly 26%, which is substantial. The fact that 4K Low (63 FPS) is only slightly below 1080p High (62 FPS) suggests that the GPU is the dominant constraint at this resolution. The CPU’s role is largely to feed the GPU, and the Ryzen 9 5900X does that effectively, but the RTX 5050 simply cannot maintain high frame rates at 4K with higher presets.
The preset scaling within each resolution also tells a story. At 1080p, going from Low to High costs about 42% of performance (106 to 62 FPS). At 1440p, the same preset jump costs about 41% (85 to 50 FPS). At 4K, the cost is about 41% as well (63 to 37 FPS). This consistent pattern indicates that the GPU’s workload scales predictably with settings, and the CPU is not introducing any variable behavior.
Similar Performance Alternatives
Looking at the nearest rivals for both components provides context for what other hardware would behave similarly. For the CPU, the Ryzen 9 5900X’s nearest rivals are all within 0.5% of its average benchmark score. The Intel Core Ultra 7 366H scores 0.3% higher, the Intel Core Ultra 7 356H scores 0.4% higher, and the AMD Ryzen AI 5 PRO 440 scores 0.4% higher. The Intel Core i7-14650HX scores 0.5% lower. These are all essentially performance equivalents, meaning any of these processors would produce nearly identical frame rates in this game when paired with the same GPU.
For the GPU, the nearest rivals are more varied. The AMD Radeon RX Vega M GL scores 0.6% higher, the AMD Radeon HD 8970M scores 1% higher, and the AMD Radeon RX 5600 XT scores 1.6% lower. The NVIDIA RTX A4000 Mobile scores 1.6% higher. These deltas are small, but they indicate that the RTX 5050 sits in a specific performance band. The RX 5600 XT, being 1.6% slower, would produce marginally lower frame rates, while the RTX A4000 Mobile would be marginally faster.
In practical terms, swapping the Ryzen 9 5900X for any of its rivals would result in imperceptible differences in Microsoft Flight Simulator. The CPU is not the bottleneck at any resolution tested. Swapping the RTX 5050 for the RX 5600 XT would shave a few frames per second, but the overall playability profile would remain the same. The RTX A4000 Mobile would provide a slight boost, potentially pushing 4K Low from 63 FPS to around 64 FPS, which is still below the 60 FPS threshold for Medium settings.
The Verdict
The verdictByResolution data makes the playability picture clear. At 1920x1080, the system clears 60 FPS on Low (106 FPS), Medium (82 FPS), and High (62 FPS) settings. Ultra settings fall just short at 59 FPS. At 2560x1440, Low (85 FPS) and Medium (66 FPS) both clear 60 FPS, while High (50 FPS) and Ultra (48 FPS) do not. At 3840x2160, only Low (63 FPS) clears the 60 FPS threshold.
So, can this PC run Microsoft Flight Simulator? Yes, with caveats. At 1080p, it runs well on High settings, which is a solid experience for most players. At 1440p, Medium settings provide a smooth 66 FPS, which is a good balance of visual quality and performance. At 4K, you are limited to Low settings for a playable experience, and even then, the 63 FPS average is barely above the 60 FPS threshold.
The data shows that this system is best suited for 1080p and 1440p gaming. If you want to play at 4K, you will need to accept Low settings, which significantly reduces visual fidelity in a game that is known for its scenery. For most players, the 1440p Medium setting at 66 FPS offers the best compromise between immersion and smoothness.
Measured FPS Breakdown
The measured FPS data provides exact figures for each resolution and preset combination.
At 3840x2160, the system achieves 37 FPS on High, 63 FPS on Low, 49 FPS on Medium (with a minimum of 42 FPS and maximum of 56 FPS), and 35 FPS on Ultra. The Medium preset is the only one with min/max data, showing a range from 42 to 56 FPS, which indicates some frame time variance.
At 2560x1440, the results are 50 FPS on High, 85 FPS on Low, 66 FPS on Medium (with a minimum of 57 FPS and maximum of 76 FPS), and 48 FPS on Ultra. The Medium preset again shows a range, from 57 to 76 FPS, which suggests that while the average is above 60 FPS, there are occasional dips below that threshold.
At 1920x1080, the system delivers 62 FPS on High, 106 FPS on Low, 82 FPS on Medium (with a minimum of 70 FPS and maximum of 95 FPS), and 59 FPS on Ultra. The Medium preset shows a healthy range from 70 to 95 FPS, with no dips below 60 FPS. The Ultra preset at 59 FPS is just one frame short of the playable threshold.
The min/max data for Medium settings across all resolutions shows a consistent pattern: the minimum frame rate is always within 9-14 FPS of the average, and the maximum is always 10-14 FPS above the average. This indicates that the RTX 5050 delivers fairly stable frame pacing, with no severe stutters or frame drops.
Best Settings per Resolution
The best settings per resolution are determined by the most demanding preset that maintains an average frame rate at or above 60 FPS.
At 1920x1080, the best playable setting is High, which achieves 62 FPS. This is the highest preset that clears the 60 FPS threshold. Ultra comes close at 59 FPS but falls short. The 62 FPS at High is a comfortable margin, and the lack of min/max data for High suggests it was measured without significant variance.
At 2560x1440, the best playable setting is Medium, which achieves 66 FPS. The min/max data for Medium shows a range from 57 to 76 FPS, meaning there are brief dips below 60 FPS even though the average is above it. High settings at 50 FPS are not playable. The 66 FPS average at Medium provides a playable experience, but players sensitive to frame dips might notice occasional stutter.
At 3840x2160, the best playable setting is Low, which achieves 63 FPS. This is the only preset that clears 60 FPS at 4K. Medium at 49 FPS and High at 37 FPS are both well below the threshold. The 63 FPS at Low is a narrow margin, and given the pattern seen in other settings, there may be occasional dips below 60 FPS in demanding scenes.
For players who prioritize visual quality over frame rate, the 1080p Ultra setting at 59 FPS is nearly playable, and the 1440p High setting at 50 FPS might be acceptable for slower-paced flight. But based on the 60 FPS threshold, the best settings are High at 1080p, Medium at 1440p, and Low at 4K.
FAQ
Q: Can this PC run Microsoft Flight Simulator at 4K?
A: Yes, but only on Low settings, which achieve 63 FPS average at 3840x2160. Medium settings drop to 49 FPS, and High settings fall to 37 FPS.
Q: What is the best resolution for this combo?
A: The data shows 1920x1080 offers the most headroom, with High settings at 62 FPS and Medium at 82 FPS. 2560x1440 is also playable at Medium (66 FPS), but 4K is limited to Low settings.
Q: How does the RTX 5050 compare to similar GPUs?
A: Its nearest rivals include the AMD Radeon RX 5600 XT (1.6% slower) and the NVIDIA RTX A4000 Mobile (1.6% faster). These deltas are small enough that frame rates would be nearly identical in practice.
Q: Is the CPU or GPU the bottleneck?
A: At 4K, the GPU is clearly the limiting factor, as frame rates drop sharply when moving from 1440p to 4K. The CPU ranks in the 87th percentile and its nearest rivals all score within 0.5%, indicating it provides consistent performance.
Q: What frame rate can I expect at 1080p Ultra?
A: The average FPS at 1920x1080 Ultra is 59, which is just below the 60 FPS playable threshold. High settings at 62 FPS are the highest playable preset at this resolution.
Q: Does the system maintain 60 FPS at 1440p Medium?
A: The average is 66 FPS, but the minimum recorded is 57 FPS. This means there are occasional dips below 60 FPS even though the average is above the threshold.