Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Microsoft Flight Simulator
Flight Simulation 2020

Microsoft Flight Simulator

67%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
117 FPS
Ultra 1080p Measured
68 FPS

1440p (2K / QHD)

Low 1440p Measured
94 FPS
Ultra 1440p Measured
54 FPS

4K (Ultra HD)

Low 4K Measured
72 FPS
Ultra 4K Measured
37 FPS
14.7ms Frame Time
22ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,444
Your CPU 29,713
Graphics Card
Required 27,967
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 37 42 52 72
1440p QHD 54 57 73 94
1080p Full HD 68 68 95 117

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 68
1920x1080 Low 117
1920x1080 Medium 95
1920x1080 Ultra 68
2560x1440 High 57
2560x1440 Low 94
2560x1440 Medium 73
2560x1440 Ultra 54
3840x2160 High 42
3840x2160 Low 72
3840x2160 Medium 52
3840x2160 Ultra 37

Performance Analysis: Microsoft Flight Simulator on Your System

The AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 4060 delivers a playable Microsoft Flight Simulator experience at 1080p and 1440p, with 4K limited to Low settings. Benchmark results show this combo ranks 2045th out of 3714 tested configurations, placing it in the middle of the pack for this flight simulator. The data indicates a clear pattern: resolution scaling heavily impacts performance, and the GPU becomes the primary constraint as resolution increases, while the CPU’s strong single-thread performance keeps frame rates stable at lower resolutions.

FAQ

Q: Can this PC run Microsoft Flight Simulator at 60 FPS on Ultra settings?

A: At 1920x1080, Yes. The measured average FPS at Ultra is 67.8, which clears the 60 FPS playable threshold. At 2560x1440, Ultra falls short with an average of 54.4 FPS, and at 3840x2160, Ultra drops to 36.5 FPS.

Q: What is the highest playable setting at 4K resolution?

A: Low is the only setting that maintains 60+ FPS at 3840x2160, with an average of 71.5 FPS. Medium averages 51.6 FPS, High 42.3 FPS, and Ultra 36.5 FPS — all below the 60 FPS threshold.

Q: How does the Ryzen 5 9600X compare to its nearest CPU rivals?

A: The CPU’s average benchmark score is 29713, placing it in the 81st percentile of all CPUs. It is 0.2% ahead of the AMD Ryzen 7 PRO 5755GE (29656), 0.5% behind the AMD Ryzen 7 7840H (29868), 0.6% behind the AMD Ryzen 7 5800XT (29879), and 0.8% behind the AMD Ryzen 7 8845HS (29955).

Q: Is the RTX 4060’s performance close to any other GPUs?

A: The GPU’s average benchmark score is 17639, placing it in the 61st percentile of all GPUs. It is 0.2% behind the AMD Radeon HD 7790 (17666), 0.3% ahead of the AMD Radeon 780M (17588), 0.5% ahead of the AMD Radeon Pro 560 (17551), and 0.7% ahead of the AMD Radeon Pro 460 (17509).

Q: What is the best setting for 1440p gaming with this combo?

A: Medium is the most demanding preset that stays at or above 60 FPS at 2560x1440, delivering an average of 72.5 FPS. High averages 56.5 FPS and Ultra averages 54.4 FPS, both below the threshold.

Q: How much performance drops when moving from 1080p to 4K?

A: At High settings, the average FPS falls from 67.8 at 1920x1080 to 56.5 at 2560x1440 (a 16.7% drop), then to 42.3 at 3840x2160 (a 37.6% drop from 1080p). At Low settings, the drop is from 117.3 at 1080p to 93.6 at 1440p to 71.5 at 4K.

CPU and GPU Roles

The benchmark data reveals a shifting balance between CPU and GPU influence depending on resolution and settings. At 1920x1080, the system achieves 117.3 FPS on Low settings and 67.8 FPS on Ultra, a performance range that suggests the CPU’s strong single-core capabilities (3dmark single-thread score of 1253) are sufficient to feed the GPU at lower resolutions. The RTX 4060’s 8 GB of GDDR6 memory and 272.0 GB/s bandwidth appear adequate for 1080p workloads, as evidenced by the narrow gap between High (67.8 FPS) and Ultra (67.8 FPS) at that resolution — the identical scores indicate the GPU is not the binding constraint at these settings.

Moving to 2560x1440, the GPU’s role becomes more pronounced. Low settings yield 93.6 FPS, but Medium drops to 72.5 FPS, High to 56.5 FPS, and Ultra to 54.4 FPS. The scaling from Low to Medium at 1440p (a 22.5% decrease) is steeper than the same transition at 1080p (from 117.3 to 95.4, an 18.7% decrease), signaling that the RTX 4060’s 15.11 TFLOPS FP32 compute and 118.1 GPixel/s pixel rate are being taxed more heavily as pixel count rises. The CPU’s 6 cores and 12 threads with a 5.40 GHz boost clock still manage to keep frame rates above 50 FPS even at Ultra, but the GPU’s fillrate limits become evident.

At 3840x2160, the GPU dominates the performance equation. The RTX 4060’s 128-bit memory bus and 8 GB VRAM capacity are stressed, as shown by the dramatic scaling: Low averages 71.5 FPS, Medium 51.6 FPS, High 42.3 FPS, and Ultra 36.5 FPS. The delta between Low and Ultra at 4K is 35 FPS, compared to 49.5 FPS at 1080p and 39.2 FPS at 1440p — but the absolute values at 4K are all much lower, indicating that the GPU’s memory bandwidth (272.0 GB/s) and ROP count (48) are the limiting factors. The CPU’s passmark multi-thread score of 30027 and cinebench r23 multi-core score of 17528.5 suggest it has ample headroom; the bottleneck is clearly the graphics card’s ability to process 4K pixels.

Across all resolutions, the pattern holds: the Ryzen 5 9600X provides consistent CPU-side performance (its 3dmark_16_threads score of 7585 and single-thread score of 1253 are robust for a 6-core chip), while the RTX 4060’s mid-range positioning (61st percentile among GPUs) means it dictates playability at higher resolutions. The data shows that at 1080p, the combo is balanced — both components contribute to the 67.8 FPS Ultra result. At 1440p, the GPU begins to lag, and at 4K, it becomes the sole performance gatekeeper.

How This Combo Ranks

This specific CPU-GPU pairing ranks 2045th out of 3714 tested combinations for Microsoft Flight Simulator, placing it in the 55th percentile of all combos tested for this game. The rank reflects the system’s ability to handle the simulator’s demanding rendering loads, which stress both processor and graphics card. Given that the CPU ranks in the 81st percentile among all CPUs and the GPU in the 61st percentile among all GPUs, the combined rank of 2045 out of 3714 is consistent with a pairing where the GPU is the weaker component — the system performs better than a purely GPU-bound rank would suggest, but worse than the CPU’s strong percentile might imply.

The combo’s position indicates it sits firmly in the mid-tier of tested systems. The CPU’s nearest rivals — the AMD Ryzen 7 PRO 5755GE, Ryzen 7 7840H, Ryzen 7 5800XT, and Ryzen 7 8845HS — all have average scores within 1% of the 9600X, meaning any of these CPUs paired with the RTX 4060 would likely produce similar results. The GPU’s nearest rivals, including the AMD Radeon 780M and Radeon Pro 560, are also within 1% of the RTX 4060’s average score, so the combo’s rank is representative of a broad cluster of similar mid-range configurations.

Benchmark results indicate that this combo’s rank is driven primarily by the GPU’s limitations at higher resolutions. At 1080p, the system achieves playable frame rates across all settings, suggesting it could rank higher in less demanding scenes. At 4K, however, the system falls to Low settings for 60 FPS, which likely drags the overall rank down relative to combos with stronger GPUs. The rank of 2045 out of 3714 is a reasonable mid-pack result for a CPU that excels in single-threaded tasks (cinebench r23 single-core score of 2183.5) paired with a GPU designed for 1080p and light 1440p gaming.

The Verdict

Yes, this PC can run Microsoft Flight Simulator, but the playable experience depends heavily on resolution. At 1920x1080, the system clears the 60 FPS threshold on all four tested settings — Low (117.3 FPS), Medium (95.4 FPS), High (67.8 FPS), and Ultra (67.8 FPS). This makes 1080p the sweet spot for this combo, with Ultra settings delivering a comfortable margin above the 60 FPS playable threshold.

At 2560x1440, the verdict is conditional. Low (93.6 FPS) and Medium (72.5 FPS) both clear 60 FPS, but High (56.5 FPS) and Ultra (54.4 FPS) fall short. Players seeking 1440p must accept Medium settings as the maximum for smooth gameplay.

At 3840x2160, the system barely qualifies as playable. Only Low settings (71.5 FPS) stay above 60 FPS; Medium drops to 51.6 FPS, High to 42.3 FPS, and Ultra to 36.5 FPS. The data shows that 4K is only viable with significant visual compromises, and even then, the margin above 60 FPS is slim.

The verdict by resolution is clear: 1080p Ultra is fully playable, 1440p Medium is the realistic ceiling, and 4K Low is the only playable option. The CPU’s 81st percentile ranking and strong single-thread performance (3dmark single-thread score of 1253) ensure that the processor never becomes the primary bottleneck — the RTX 4060’s 61st percentile GPU ranking is what limits higher resolutions.

Measured FPS Breakdown

1920x1080:

  • Low: 117.3 average FPS
  • Medium: 95.4 average FPS
  • High: 67.8 average FPS
  • Ultra: 67.8 average FPS

The identical High and Ultra scores at 1080p are notable — they suggest that at this resolution, the RTX 4060 hits a performance ceiling where additional graphical fidelity does not reduce frame rate, likely due to CPU-side frame pacing or a driver-level cap. The spread from Low to Ultra is 49.5 FPS, with the largest single drop occurring from Medium to High (27.6 FPS).

2560x1440:

  • Low: 93.6 average FPS
  • Medium: 72.5 average FPS
  • High: 56.5 average FPS
  • Ultra: 54.4 average FPS

At 1440p, the scaling is more gradual but consistently downward. The drop from Low to Medium is 21.1 FPS, from Medium to High is 16.0 FPS, and from High to Ultra is just 2.1 FPS. The small gap between High and Ultra indicates the GPU is nearing its limits, with only 2.1 FPS separating the two most demanding presets.

3840x2160:

  • Low: 71.5 average FPS
  • Medium: 51.6 average FPS
  • High: 42.3 average FPS
  • Ultra: 36.5 average FPS

The 4K results show a steep, linear decline as settings increase. Low to Medium drops 19.9 FPS, Medium to High drops 9.3 FPS, and High to Ultra drops 5.8 FPS. The total spread from Low to Ultra is 35 FPS, but the absolute values are all significantly lower than at 1440p, confirming that the RTX 4060’s memory bandwidth and compute resources are overwhelmed at 4K.

No minimum or maximum FPS values were recorded in the data; only average FPS is available for each resolution and settings combination. The data is measured (not simulated), and the playable threshold is defined as 60 FPS.

Best Settings per Resolution

1920x1080 — Ultra (67.8 average FPS):

At 1080p, Ultra is the most demanding preset that stays at or above 60 FPS. The average of 67.8 FPS provides a 7.8 FPS margin above the playable threshold. Since High produces the exact same average FPS (67.8), there is no performance penalty for choosing Ultra — players should select Ultra for the best visual quality without sacrificing smoothness.

2560x1440 — Medium (72.5 average FPS):

Medium is the highest preset that clears 60 FPS at 1440p, with a 12.5 FPS margin. High (56.5 FPS) and Ultra (54.4 FPS) both fall below the threshold. The data shows that Medium offers a significant FPS advantage over High (16.0 FPS difference), making it the clear choice for 1440p gaming. Low (93.6 FPS) remains available for players who prioritize frame rate over visual fidelity, but Medium provides the best balance of quality and performance.

3840x2160 — Low (71.5 average FPS):

Low is the only playable setting at 4K, delivering 71.5 FPS on average — an 11.5 FPS margin above the threshold. Medium (51.6 FPS), High (42.3 FPS), and Ultra (36.5 FPS) all fail to reach 60 FPS. The transition from Low to Medium at 4K is a 19.9 FPS drop, the largest single-setting penalty across all resolutions, indicating that the RTX 4060 cannot handle 4K medium-quality assets. Players at 4K should accept Low settings or consider lowering the resolution to 1440p for better visual quality.

The data indicates that this combo’s best settings align with a 1080p gaming focus. At 1080p, Ultra is fully playable with no compromise. At 1440p, Medium is the ceiling. At 4K, the system only just manages playable frame rates on Low, and even that margin is modest. The Ryzen 5 9600X provides sufficient CPU performance across all resolutions, but the RTX 4060’s 8 GB VRAM and 128-bit memory interface limit its ability to handle Microsoft Flight Simulator’s heavy texture and geometry loads at higher resolutions.