Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Microsoft Flight Simulator
Flight Simulation 2020

Microsoft Flight Simulator

61%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
106 FPS
Ultra 1080p Measured
59 FPS

1440p (2K / QHD)

Low 1440p Measured
85 FPS
Ultra 1440p Measured
48 FPS

4K (Ultra HD)

Low 4K Measured
63 FPS
Ultra 4K Measured
35 FPS
16.1ms Frame Time
24ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,444
Your CPU 21,484
Graphics Card
Required 27,967
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 35 37 49 63
1440p QHD 48 50 66 85
1080p Full HD 59 62 82 106

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 62
1920x1080 Low 106
1920x1080 Medium 82
1920x1080 Ultra 59
2560x1440 High 50
2560x1440 Low 85
2560x1440 Medium 66
2560x1440 Ultra 48
3840x2160 High 37
3840x2160 Low 63
3840x2160 Medium 49
3840x2160 Ultra 35

Performance Analysis: Microsoft Flight Simulator on Your System

How This Combo Ranks

The AMD Ryzen 5 2600 and NVIDIA GeForce RTX 5050 combination sits at rank 2278 out of 3714 tested combos in the database for Microsoft Flight Simulator. This places the pairing in the lower-middle portion of the field, roughly in the 61st percentile of all recorded system configurations. The ranking reflects a hardware pairing that can run the simulator, but not with extreme headroom at demanding settings.

The CPU itself ranks at the 75th percentile against all processors in the database, indicating that the Ryzen 5 2600 remains a competent mid-range part even in this flight simulator workload. The GPU sits at the 66th percentile against all graphics cards, which is slightly lower than the CPU's relative standing. This suggests the graphics card is the more limiting factor in this pairing, an observation that aligns with the measured frame rates across resolutions and presets.

The combo's position in the rankings implies that there are roughly 1500 tested combinations that deliver better performance, but also a substantial number that perform worse. For a flight simulator known for demanding rendering workloads, this pairing can achieve playable frame rates, but the data shows a clear ceiling at higher resolutions and quality settings. The 2278 rank is not a poor showing, but it is far from the top tier of configurations in the database.

Similar Performance Alternatives

The database lists four nearest rivals for the CPU and four for the GPU, based on aggregate benchmark scores. These adjacent parts help define the performance envelope of this combo.

For the Ryzen 5 2600, the closest scoring processors are the Intel Core Ultra 5 228V with an average score of 21440, just 0.2% higher, and the Intel Core i9-11900H at 21367, 0.5% higher. Slightly further out, the Intel Xeon D-1746TER scores 21635, which is 0.7% higher than the Ryzen, and the AMD EPYC 9454 scores 21223, 1.2% lower. These deltas are small, all within roughly 1.2% of each other, meaning a system builder swapping between any of these CPUs would see nearly identical CPU-bound behavior in Microsoft Flight Simulator. The practical implication is that the Ryzen 5 2600 is not an outlier in either direction; it sits squarely in a cluster of similarly performing processors.

On the GPU side, the RTX 5050's nearest rivals are equally tight in aggregate scoring. The AMD Radeon RX Vega M GL scores 21153, 0.6% higher, and the AMD Radeon HD 8970M scores 21237, 1% higher. The AMD Radeon RX 5600 XT scores 20713, 1.6% lower, and the NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. The RTX 5050's average benchmark score of 21035 places it between these parts. For someone considering alternatives, the RX 5600 XT would behave nearly identically in this game, while the RX Vega M GL and HD 8970M would offer marginally higher GPU throughput. These differences are small enough that the game's frame rates would likely differ by only a few FPS at most, assuming the same CPU is used.

CPU and GPU Roles

The recorded data for this combo reveals how the CPU and GPU split responsibilities across resolutions and presets. At 1080p, the lowest resolution tested, the frame rates scale strongly with preset levels. The Low preset yields 106 FPS average, Medium drops to 82 FPS, High falls to 62 FPS, and Ultra sits at 59 FPS. This steep drop from Low to Ultra indicates that the GPU is being loaded progressively more as quality settings increase, but the CPU still has enough headroom to feed the graphics card at these settings.

Moving to 2560x1440, the pattern shifts. Low averages 85 FPS, Medium 66 FPS, High 50 FPS, and Ultra 48 FPS. The drop from Low to Medium is 19 FPS, which is similar to the 1080p gap of 24 FPS between those two presets. However, the High to Ultra gap at 1440p is only 2 FPS, compared to 3 FPS at 1080p. This compression at the top end suggests the GPU is becoming the bottleneck at higher resolutions, as the rendering load grows faster than the CPU's ability to prepare frames.

At 3840x2160, the GPU bottleneck becomes dominant. Low averages 63 FPS, Medium 49 FPS, High 37 FPS, and Ultra 35 FPS. The difference between High and Ultra is just 2 FPS, and the gap between Medium and High is 12 FPS. The resolution scaling from 1080p to 4K at the same preset shows the GPU's workload increasing roughly in line with pixel count. For example, Low at 1080p is 106 FPS, at 1440p it is 85 FPS, and at 4K it is 63 FPS. This is a clear indication that the RTX 5050 is the limiting factor at higher resolutions, while the Ryzen 5 2600 provides sufficient CPU throughput to avoid becoming a major constraint at any tested setting.

The Verdict

The question of whether this PC can run Microsoft Flight Simulator receives a qualified yes. The verdict by resolution shows that 60 FPS is achievable at all three tested resolutions, but only at certain presets. At 3840x2160, the playable settings list contains only Low, with an average of 63 FPS. At 2560x1440, both Low and Medium are playable, with Medium averaging 66 FPS. At 1920x1080, High, Medium, and Low are all playable, with High averaging 62 FPS.

The 60 FPS threshold is the database's definition of playable, and the data shows that this combo clears it at 1080p High, which is the best playable setting at that resolution. At 1440p, the best playable setting is Medium, which delivers 66 FPS. At 4K, only Low reaches above 60 FPS, with 63 FPS. Notably, 1080p Ultra falls just short at 59 FPS, missing the threshold by a single frame. This means a user targeting smooth gameplay should stick to High at 1080p, Medium at 1440p, and Low at 4K. The system will run the game, but pushing beyond these settings will result in frame rates below the playable mark.

Measured FPS Breakdown

The database contains exact average frame rates for 12 combinations of resolution and preset, with minimum and maximum values recorded for the Medium preset at each resolution.

At 3840x2160, the Low preset averages 63 FPS. Medium averages 49 FPS, with a minimum of 42 and a maximum of 56. High averages 37 FPS, and Ultra averages 35 FPS. The spread between Low and Ultra is 28 FPS, showing a significant performance cost for the highest quality settings at 4K.

At 2560x1440, Low averages 85 FPS. Medium averages 66 FPS, with a minimum of 57 and a maximum of 76. High averages 50 FPS, and Ultra averages 48 FPS. The range from Low to Ultra is 37 FPS, with the Medium preset showing a 19 FPS swing between its minimum and maximum.

At 1920x1080, Low averages 106 FPS, the highest recorded value in the entire dataset. Medium averages 82 FPS, with a minimum of 70 and a maximum of 95. High averages 62 FPS, and Ultra averages 59 FPS. The gap from Low to Ultra is 47 FPS, indicating that even at the lowest resolution, the Ultra preset imposes a substantial performance penalty compared to Low.

The minimum and maximum values for Medium presets provide context for frame time consistency. At 1080p Medium, the range from 70 to 95 FPS represents a 25 FPS variance, while at 1440p Medium the range is 19 FPS, and at 4K Medium it is 14 FPS. This suggests that frame pacing becomes more consistent as resolution increases, likely because the GPU is more consistently saturated at higher pixel counts.

Best Settings per Resolution

For each resolution, the database identifies the most demanding preset that maintains an average of at least 60 FPS.

At 3840x2160, the best playable setting is Low, which delivers an average of 63 FPS. This is the only preset at 4K that clears the playable threshold. Medium falls to 49 FPS, High to 37 FPS, and Ultra to 35 FPS, all of which are below the 60 FPS mark.

At 2560x1440, the best playable setting is Medium, averaging 66 FPS. This is a comfortable margin above the threshold, with the minimum recorded at 57 FPS. High and Ultra both fall below 60 FPS at 50 and 48 FPS respectively, making them unsuitable for smooth play.

At 1920x1080, the best playable setting is High, averaging 62 FPS. This is a narrow margin, just 2 FPS above the threshold. Medium and Low also clear 60 FPS, at 82 and 106 FPS respectively, but High is the most visually demanding option that remains playable. Ultra misses the mark at 59 FPS, a single frame below the threshold.

The data implies that a user prioritizing visual quality should select High at 1080p, Medium at 1440p, and Low at 4K. These settings represent the highest quality levels that maintain 60 FPS average, with the caveat that the 1080p High and 4K Low margins are relatively slim.

FAQ

Q: Can this PC run Microsoft Flight Simulator at 4K resolution?

A: Yes, but only at the Low preset, which averages 63 FPS. Medium averages 49 FPS, High averages 37 FPS, and Ultra averages 35 FPS, all below the 60 FPS playable threshold.

Q: What is the best preset for 1440p gaming with this combo?

A: The Medium preset is the most demanding option that stays playable, averaging 66 FPS. Low also works at 85 FPS, while High and Ultra fall to 50 and 48 FPS respectively.

Q: Does the RTX 5050 bottleneck the Ryzen 5 2600 in this game?

A: The resolution scaling suggests the GPU is the limiting factor at higher resolutions. At 4K, the gap between High and Ultra is only 2 FPS, indicating the GPU is saturated, while the CPU retains enough throughput to avoid being the primary constraint.

Q: Is 1080p Ultra playable on this system?

A: No, the Ultra preset at 1080p averages 59 FPS, which is 1 FPS below the 60 FPS playable threshold. The High preset is the best playable option at 62 FPS.

Q: How consistent are frame times at Medium settings?

A: The Medium preset shows a 25 FPS range at 1080p (70 to 95), a 19 FPS range at 1440p (57 to 76), and a 14 FPS range at 4K (42 to 56). The variance narrows as resolution increases, indicating more consistent frame delivery at higher pixel counts.

Q: What is the highest average frame rate recorded for this combo?

A: The highest average is 106 FPS, achieved at 1920x1080 with the Low preset. This is the only setting in the dataset that exceeds 100 FPS.