Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Lockdown Protocol
FPS 2024

Lockdown Protocol

50%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
112 FPS
Ultra 1080p Measured
52 FPS

1440p (2K / QHD)

Low 1440p Measured
82 FPS
Ultra 1440p Measured
38 FPS

4K (Ultra HD)

Low 4K Measured
53 FPS
Ultra 4K Measured
25 FPS
14.3ms Frame Time
21ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 84,003
Graphics Card
Required 27,646
Your GPU 0

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Available

Your GPU supports ray tracing but may impact FPS.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 25 33 38 53
1440p QHD 38 51 59 82
1080p Full HD 52 70 80 112

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 70
1920x1080 Low 112
1920x1080 Medium 80
1920x1080 Ultra 52
2560x1440 High 51
2560x1440 Low 82
2560x1440 Medium 59
2560x1440 Ultra 38
3840x2160 High 33
3840x2160 Low 53
3840x2160 Medium 38
3840x2160 Ultra 25

Performance Analysis: Lockdown Protocol on Your System

The Intel Core Ultra 9 290K Plus paired with the NVIDIA GeForce RTX 3050 4 GB presents a stark contrast in capabilities: a top-tier 24-core processor driving an entry-level 4 GB graphics card. Benchmark data for Lockdown Protocol shows this combination is heavily GPU-bound at higher resolutions, while the CPU's strength only becomes apparent at 1080p. This analysis walks through the measured performance, setting recommendations, and component roles based solely on the provided data.

Similar Performance Alternatives

The CPU in this combo, the Intel Core Ultra 9 290K Plus, has an average benchmark score of 84003, placing it in the 96th percentile of all CPUs. Its nearest rivals are extremely close in aggregate performance. The Intel Core Ultra 9 285K scores 83807, a negligible 0.2% difference, making it the most direct alternative for users seeking nearly identical processor-level performance. The AMD EPYC 4584PX and AMD EPYC 9135 also fall within a 1.2% delta, scoring 83090 and 82980 respectively. On the higher end, the AMD EPYC 7F72 scores 85072, which is 1.3% faster than the 290K Plus in the same benchmark suite; this indicates that in synthetic CPU workloads, these four server and desktop processors are functionally interchangeable in terms of raw compute output.

For the GPU, the nearestRivals field is empty, and the NVIDIA GeForce RTX 3050 4 GB holds a 50th percentile ranking among all GPUs with no average benchmark score provided. This means there is no direct comparative data for the graphics card in the FACT PACK. However, the measured FPS data reveals its practical standing. At 1920x1080 with Low settings, the combo produces 112 FPS, but at 3840x2160 with Ultra settings, it drops to 25 FPS. This performance envelope suggests that the RTX 3050 4 GB is the limiting factor, and any system with a similar GPU tier would behave comparably—regardless of the CPU installed. The data implies that swapping the 290K Plus for its 0.2% slower rival, the 285K, would yield virtually identical frame rates, as the bottleneck is overwhelmingly the graphics card in most scenarios.

Best Settings per Resolution

For each resolution, the goal is to identify the most demanding preset that maintains an average frame rate at or above the 60 FPS playable threshold.

At 3840x2160, no preset achieves 60 FPS. The highest average is 53 FPS at Low settings. Medium averages 38 FPS, High averages 33 FPS, and Ultra averages 25 FPS. Consequently, the data indicates no playable settings exist at 4K for this combo.

At 2560x1440, only the Low preset clears the threshold, with an average of 82 FPS. Medium falls just short at 59 FPS, while High and Ultra average 51 FPS and 38 FPS, respectively. Therefore, the best playable setting is Low, offering a comfortable margin above the 60 FPS target.

At 1920x1080, the situation improves markedly. High settings average 70 FPS, making it the most demanding preset that stays above 60 FPS. Medium averages 80 FPS, and Low averages 112 FPS. Ultra averages 52 FPS, which is below the threshold. Thus, the best playable setting at 1080p is High, delivering 70 FPS.

FAQ

*Q: Can this PC run Lockdown Protocol at 4K resolution?*

A: No. At 3840x2160, the highest average frame rate recorded is 53 FPS on Low settings, which falls below the 60 FPS playable threshold. Medium, High, and Ultra presets average 38, 33, and 25 FPS, respectively.

Q: What is the best preset for 1440p gaming?

A: The only playable preset at 2560x1440 is Low, which achieves an average of 82 FPS. The Medium preset averages 59 FPS, just under the 60 FPS threshold, making Low the only viable option for smooth gameplay.

Q: Which settings should I use for 1080p?

A: For 1920x1080, the High preset is the most demanding that stays above 60 FPS, averaging 70 FPS. If you prefer higher frame rates, Medium averages 80 FPS and Low averages 112 FPS, but Ultra falls below the threshold at 52 FPS.

Q: How does the Ultra preset perform at 1080p?

A: The Ultra preset at 1920x1080 averages 52 FPS, which is 8 FPS below the 60 FPS playable threshold. It is not recommended for smooth play, though the data shows it is the only preset at this resolution that fails to hit the target.

Q: What is the frame time consistency at Medium settings?

A: For Medium settings, the data provides min and max FPS values. At 1920x1080, the range is 68 to 92 FPS with an average of 80. At 2560x1440, the range is 50 to 67 FPS with an average of 59. At 3840x2160, the range is 32 to 43 FPS with an average of 38.

Q: Is the CPU or GPU more responsible for the frame rate at 1080p?

A: At 1920x1080, the CPU's power is more evident, as the High preset still yields 70 FPS. The scaling from 1440p to 1080p shows a significant jump from 51 to 70 FPS on High, suggesting the GPU is less stressed at this resolution, allowing the CPU to drive higher frame rates.

The Verdict

Benchmark results indicate this system can play Lockdown Protocol, but with significant resolution limitations. At 1920x1080, the combo delivers playable performance on High, Medium, and Low presets, with the best playable setting being High at an average of 70 FPS. This is a clear pass for 1080p gaming.

At 2560x1440, the system is only playable on the Low preset, which averages 82 FPS. This is a conditional pass; users must accept the lowest visual quality to maintain smooth gameplay. The Medium preset at 59 FPS is a near-miss but fails the 60 FPS threshold.

At 3840x2160, the system cannot run the game at a playable frame rate on any preset. The best average is 53 FPS on Low, which is still 7 FPS below the threshold. Therefore, 4K gaming is not viable for this pairing. The verdict is straightforward: play at 1080p for a good experience, optionally at 1440p with Low settings, but avoid 4K entirely.

Measured FPS Breakdown

The measured data provides a clear progression of performance across resolutions and settings. At 1920x1080, the average FPS ranges from 112 on Low to 52 on Ultra. The Low preset delivers the highest average, while Medium averages 80 FPS with a minimum of 68 and a maximum of 92. High settings average 70 FPS, and Ultra trails at 52 FPS.

Moving to 2560x1440, the averages drop across the board. Low settings average 82 FPS, which is a 30 FPS decrease from 1080p Low. Medium averages 59 FPS, with a minimum of 50 and a maximum of 67. High settings average 51 FPS, and Ultra averages 38 FPS. The delta between Low and Ultra at this resolution is 44 FPS.

At 3840x2160, performance is severely constrained. Low settings average 53 FPS, the only double-digit figure above 50. Medium averages 38 FPS, with a spread of 32 to 43 FPS. High averages 33 FPS, and Ultra averages 25 FPS. The gap between 1440p Low and 4K Low is 29 FPS, highlighting the GPU's struggle with the pixel count.

How This Combo Ranks

This specific combination of the Intel Core Ultra 9 290K Plus and the NVIDIA GeForce RTX 3050 4 GB ranks 3269 out of 3714 tested combos for Lockdown Protocol. This places it in the bottom 12% of all configurations in the database. The rank reflects the GPU's 50th percentile standing rather than the CPU's high 96th percentile, as the measured frame rates are consistently low at higher resolutions.

The data shows that the combo's performance is dominated by the graphics card. At 4K, the 33 FPS average on High is far below what the 290K Plus could theoretically support, proving the RTX 3050 4 GB is the primary bottleneck. In contrast, a combo with a mid-range GPU and a weaker CPU would likely score higher in the rankings, because the limiting factor would be less severe. The rank of 3269 serves as a warning: this is a lopsided pairing where the CPU's potential is largely wasted on a GPU that cannot push frames beyond 1080p High settings in this title.

CPU and GPU Roles

Benchmark results indicate a clear division of labor between the CPU and GPU in Lockdown Protocol. The CPU, Intel Core Ultra 9 290K Plus, has a multi-core score of 21727 in Cinebench R20 and a single-core score of 3067, placing it in the 96th percentile. This suggests it can handle complex game logic and physics without issue. However, its role becomes secondary when the GPU is overwhelmed.

At 3840x2160, the GPU is the dominant constraint. The frame rate barely scales with settings: from Low (53 FPS) to Ultra (25 FPS), the difference is 28 FPS, and even the Low preset cannot hit 60 FPS. This indicates the GPU is saturated, and the CPU's high performance has no effect on the outcome. The RTX 3050 4 GB's 4 GB memory and 192.0 GB/s bandwidth are insufficient for the data load at 4K.

At 2560x1440, the GPU remains the limiting factor, but the CPU's role becomes more visible. The jump from 4K Low (53 FPS) to 1440p Low (82 FPS) is 29 FPS, showing that the GPU has more headroom as resolution drops. Yet, the Medium preset at 1440p still fails to reach 60 FPS at 59 FPS, indicating the GPU is still the wall.

At 1920x1080, the CPU's strength emerges. The High preset averages 70 FPS, which is higher than the 1440p High average of 51 FPS, a 19 FPS improvement. This scaling suggests that at 1080p, the GPU is no longer the sole bottleneck; the CPU's strong single-core performance (4823 in Passmark single-thread) helps maintain higher frame rates. The data shows that the 290K Plus can push the RTX 3050 to its limits at 1080p, but beyond that resolution, the GPU's 4 GB memory capacity and 7.127 TFLOPS compute power cap performance, making the CPU's role negligible.