Lockdown Protocol

The Intel Core Ultra 7 270K Plus paired with the NVIDIA GeForce RTX 5050 is a desktop combination built around a 24-core Arrow Lake Refresh processor and a Blackwell 2.0-based entry-level graphics card. For Lockdown Protocol, an FPS title, this pairing delivers a clear split in performance: at 1080p and 1440p it comfortably clears the 60 FPS threshold at most presets, while 4K Ultra remains out of reach. The data below breaks down exactly where this system stands, which components carry the load, and which settings you should actually use.

Similar Performance Alternatives

The CPU and GPU each have close neighbors in the benchmark database, and those neighbors give a practical sense of what this combo feels like in-game. The Intel Core Ultra 7 270K Plus sits at the 96th percentile among all CPUs, with an average benchmark score of 93785. Its nearest rival is the Intel Xeon 6520P, which scores 93786 — a delta of 0%, meaning the two are effectively identical in aggregate performance. The AMD EPYC 4564P is 1.5% behind with a score of 95183, while the AMD EPYC 9175F trails by 1.9% at 95615, and the AMD EPYC 4565P is 2.1% behind at 95764. For Lockdown Protocol, any of these CPUs would deliver essentially the same frame rates; the game is not likely to stress the 24 cores heavily, so the differences among these rivals are negligible in practice.

On the GPU side, the NVIDIA GeForce RTX 5050 scores an average of 21035, placing it at the 66th percentile among all GPUs. Its nearest rival is the AMD Radeon RX Vega M GL, which scores 21153 — that is 0.6% higher, so the RTX 5050 is marginally slower. The AMD Radeon HD 8970M is 1% ahead at 21237, and the NVIDIA RTX A4000 Mobile is 1.6% ahead at 21379. Interestingly, the AMD Radeon RX 5600 XT scores 20713, which is 1.6% behind the RTX 5050. These are the cards that would behave similarly in Lockdown Protocol: expect nearly identical frame rates at the same settings and resolution. None of these rivals are modern flagship parts, which reinforces that the RTX 5050 is an entry-level GPU; it has 8 GB of GDDR6 memory on a 128-bit bus with 320.0 GB/s bandwidth, and its 13.17 TFLOPS FP32 throughput is modest.

The practical takeaway from the rivals is that this system is CPU-heavy relative to its GPU. The 270K Plus is a top-tier processor, while the RTX 5050 sits near the middle of the pack. In a game like Lockdown Protocol, that imbalance matters because the GPU will be the limiting factor at higher resolutions and presets.

CPU and GPU Roles

Lockdown Protocol’s performance scaling across resolutions and presets reveals which component dominates. At 1080p Low, the combo hits 168 FPS average. Dropping to 1440p Low reduces that to 123 FPS, a 26.8% decrease, and at 4K Low it falls to 79 FPS, a further 35.8% drop from 1440p. This steep decline as resolution climbs is classic GPU-bound behavior: the RTX 5050’s pixel throughput and memory bandwidth (320.0 GB/s) are the constraints. The CPU’s 24 cores and 36 MB of L3 cache are more than sufficient to feed the GPU at 1080p, where the frame rate is highest.

The preset scaling at a fixed resolution tells the same story. At 1080p, moving from Low to Medium drops the average from 168 to 119 FPS, a 29.2% reduction. High drops to 104 FPS (another 12.6% loss), and Ultra falls to 78 FPS (a 25% loss from High). At 1440p, the pattern is similar but compressed: Low is 123 FPS, Medium is 87 FPS, High is 76 FPS, and Ultra is 57 FPS. At 4K, Low is 79 FPS, Medium is 56 FPS, High is 49 FPS, and Ultra is 37 FPS. The gap between Low and Ultra grows as resolution increases — at 1080p the spread is 90 FPS, at 1440p it is 66 FPS, and at 4K it is 42 FPS — which indicates that the GPU is being saturated more completely at higher resolutions, leaving less headroom for preset changes to matter.

The CPU’s role is most apparent at 1080p Low, where 168 FPS is achieved. That frame rate is high enough that any CPU bottleneck would show up as inconsistent frame pacing, but the measured data shows no min or max FPS values for Low settings, suggesting the test focused on averages. The CPU’s single-thread score of 5068 in Passmark and its 96th percentile ranking mean it is not the limiting factor in this game; even at 1080p Ultra with 78 FPS, the GPU is doing the heavy lifting. The RTX 5050’s 20 RT cores and 80 tensor cores are present, but Lockdown Protocol’s rendering load at Ultra settings clearly exceeds what the card can handle at 4K, where it averages only 37 FPS.

For a builder, this means: if you are playing at 1080p or 1440p, the RTX 5050 is the component to watch, but the 270K Plus ensures you are never CPU-limited. At 4K, the GPU is unequivocally the bottleneck, and no CPU upgrade would help.

Best Settings per Resolution

The verdict data specifies the most demanding preset that stays at or above 60 FPS at each resolution, based on average FPS. At 1920x1080, that preset is Ultra, with an average of 78 FPS. This is the highest quality setting that clears the 60 FPS threshold, and it does so with 18 FPS of headroom. The measured medium preset at 1080p shows a min FPS of 101 and a max of 137, so Ultra likely dips below 60 in heavy scenes, but the average is solidly playable.

At 2560x1440, the best playable preset is High, averaging 76 FPS. Medium at this resolution averages 87 FPS with a min of 74 and max of 100, but High is the most demanding preset that still stays above 60 FPS on average. Ultra at 1440p falls to 57 FPS, just 3 FPS short of the threshold, so it is not recommended if you want consistent performance.

At 3840x2160, only Low is playable, averaging 79 FPS. Medium drops to 56 FPS, below the 60 FPS line, and High and Ultra are worse at 49 and 37 FPS respectively. The data shows that 4K Low is the only viable option, and even then, the 79 FPS average is achieved with no min or max values reported, so frame pacing is uncertain.

The recommended settings per resolution are: 1080p Ultra (78 FPS), 1440p High (76 FPS), and 4K Low (79 FPS). These are the highest quality presets that maintain a 60 FPS average.

The Verdict

This PC can run Lockdown Protocol, but the experience depends heavily on your target resolution. At 1920x1080, the system clears 60 FPS at every preset, including Ultra at 78 FPS. That makes 1080p the sweet spot; you can max out the game and still have performance to spare. At 2560x1440, the system is also playable at High (76 FPS) and Medium (87 FPS), but Ultra falls to 57 FPS, just below the threshold. If you own a 1440p monitor, you should stick to High settings for a locked experience. At 3840x2160, the situation is more restrictive: only Low (79 FPS) is playable, while Medium (56 FPS), High (49 FPS), and Ultra (37 FPS) all miss the 60 FPS mark. For 4K, you would have to accept Low settings, which undermines the visual quality of the game.

The verdict by resolution is clear: 1080p Ultra is fully playable, 1440p High is the practical limit, and 4K Low is the only option above 60 FPS. The data shows no resolution or preset combination that exceeds 60 FPS at 4K beyond Low. This is a system for 1080p gaming with some 1440p capability, not a 4K machine.

Measured FPS Breakdown

The measured FPS data provides exact averages, with min and max values only for Medium presets. At 1920x1080, Low averages 168 FPS, Medium averages 119 FPS with a min of 101 and max of 137, High averages 104 FPS, and Ultra averages 78 FPS. The spread from Low to Ultra is 90 FPS, and the Medium preset shows a 36 FPS range between min and max, indicating some frame variability but nothing severe.

At 2560x1440, Low averages 123 FPS, Medium averages 87 FPS with a min of 74 and max of 100, High averages 76 FPS, and Ultra averages 57 FPS. The drop from 1080p to 1440p at the same preset is consistent: Low loses 45 FPS, Medium loses 32 FPS, High loses 28 FPS, and Ultra loses 21 FPS. This diminishing absolute loss at higher presets reflects the GPU becoming more saturated.

At 3840x2160, Low averages 79 FPS, Medium averages 56 FPS with a min of 48 and max of 65, High averages 49 FPS, and Ultra averages 37 FPS. The Medium preset at 4K shows a wide 17 FPS range, with the min dropping to 48 FPS — that is below the 60 FPS threshold even though the average is 56 FPS. This suggests that 4K Medium is not consistently playable, and the average of 56 FPS is misleading if you care about frame dips.

Notably, the data lacks min and max values for Low, High, and Ultra presets at all resolutions, so the Medium values are the only window into frame consistency. The 1440p Medium min of 74 FPS and 1080p Medium min of 101 FPS are both comfortable above 60 FPS, but the 4K Medium min of 48 FPS is a warning sign for that resolution.

How This Combo Ranks

Among all tested combinations in Lockdown Protocol, this CPU-GPU pairing ranks 2293 out of 3714 combos. That places it in the lower-middle portion of the field, at roughly the 61.7th percentile (calculated from the rank and total). The data is measured, not estimated, which adds confidence to the results.

The rank reflects the RTX 5050’s position as an entry-level GPU. The CPU is a high-end part — the 270K Plus ranks at the 96th percentile among all CPUs — but the combo’s overall standing is dragged down by the GPU’s 66th percentile ranking. In a game like Lockdown Protocol, which is not exceptionally demanding, this rank means the system will outperform many older or lower-tier combos, but it will also be beaten by any pairing with a stronger GPU.

For context, the GPU’s nearest rivals include the AMD Radeon RX 5600 XT, which is 1.6% slower, and the NVIDIA RTX A4000 Mobile, which is 1.6% faster. A combo with an RX 5600 XT would likely rank just below this one, while an RTX A4000 Mobile system would rank just above. The CPU’s rivals — the Xeon 6520P, EPYC 4564P, EPYC 9175F, and EPYC 4565P — are all server or workstation parts that would not change the gaming outcome meaningfully.

The rank of 2293 out of 3714 is a useful benchmark for buyers: this is not a top-tier gaming rig, but it is also far from the bottom. It sits in the range where you can play most games at 1080p with high settings, and some games at 1440p with adjustments. For Lockdown Protocol specifically, the system’s ability to hit 78 FPS at 1080p Ultra is a solid result that aligns with its mid-pack ranking. If you were to upgrade the GPU to a higher-tier card, the CPU would not hold you back — the 270K Plus has enough headroom to push significantly higher frame rates. But as configured, the RTX 5050 defines the ceiling, and that ceiling is 1080p Ultra or 1440p High in this game.