Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 16 | 19 | 21 | 31 |
| 1440p QHD | 24 | 30 | 34 | 46 |
| 1080p Full HD | 30 | 37 | 43 | 63 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
FAQ
Q: What is the CPU and GPU combination analyzed in this benchmark?
A: The tested combination is an Intel Core i7-14700K processor paired with an NVIDIA GeForce GTX 1050 Ti graphics card. The CPU is a 20-core, 28-thread Raptor Lake Refresh part with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. The GPU is a Pascal architecture card with 768 shading units and 4 GB of GDDR5 memory on a 128-bit bus.
Q: What is the playability threshold used in the database?
A: The playability threshold is set at 60 FPS. Any configuration that maintains an average frame rate at or above this value is considered playable. Results below this threshold are not marked as playable in the verdict.
Q: At which resolution and settings does this combo achieve 60 FPS or higher?
A: The only configuration that clears the 60 FPS threshold is 1920x1080 with Low settings, where the average frame rate is 62.5 FPS. At 2560x1440 and 3840x2160, no settings preset reaches 60 FPS.
Q: How does the CPU compare to its nearest rivals in average benchmark score?
A: The Intel Core i7-14700K has an average benchmark score of 69355. Its nearest rivals are the AMD EPYC 9115 (score 69288, 0.1% behind), AMD Ryzen 9 7950X (score 69515, 0.2% ahead), AMD Ryzen 9 7940HX (score 69875, 0.7% ahead), and AMD Ryzen 7 9700F (score 69996, 0.9% ahead). The differences are all within roughly one percentage point.
Q: What is the GPU's percentile ranking among all tested GPUs?
A: The NVIDIA GeForce GTX 1050 Ti sits in the 25th percentile of all GPUs in the database, meaning roughly three-quarters of tested graphics cards outperform it. Its average benchmark score is 4193.
Q: How does the GPU compare to its nearest rivals in average benchmark score?
A: The GTX 1050 Ti's average score of 4193 is very close to its nearest rivals: the AMD Radeon R5 M330 (score 4170, 0.6% behind), NVIDIA Quadro K2100M (score 4151, 1% behind), NVIDIA Quadro K3000M (score 4241, 1.1% ahead), and AMD Radeon Vega 3 (score 4268, 1.8% ahead). All five GPUs are within a narrow band of performance.
CPU and GPU Roles
The benchmark results for Lockdown Protocol show a clear pattern where the GPU is the dominant bottleneck across nearly all resolutions and settings. The Intel Core i7-14700K is a high-end desktop processor with a 94th percentile ranking among all CPUs, and its compute capabilities are far beyond what a GTX 1050 Ti can utilize in this title. The GPU, by contrast, ranks in the 25th percentile, indicating that its rendering throughput is the limiting factor.
At 3840x2160, the frame rates range from 15.7 FPS at Ultra settings to 30.9 FPS at Low settings. The spread between Low and Ultra is 15.2 FPS, which shows that the GPU's pixel throughput and memory bandwidth are heavily taxed at this resolution. The 4 GB VRAM capacity and 112.1 GB/s bandwidth are insufficient to maintain fluid frame delivery, regardless of CPU headroom.
At 2560x1440, the same trend holds. Low settings produce 46 FPS, while Ultra drops to 23.9 FPS. The scaling from Low to Medium is a reduction of 11.7 FPS, and from Medium to High another 4.8 FPS. The GPU is clearly the limiting component; the CPU is capable of feeding frames far faster than the GTX 1050 Ti can render them at this resolution.
At 1920x1080, the CPU begins to show some relevance, but the GPU still dominates. Low settings achieve 62.5 FPS, which is above the playability threshold. Medium settings drop to 43.3 FPS, High to 36.5 FPS, and Ultra to 29.7 FPS. The fact that Low settings clear 60 FPS while Medium falls well below indicates that the GPU's shading units and texture units are saturated as settings increase. The CPU, with 20 cores and 28 threads, is not the constraint in any of these measurements.
The role of the CPU is essentially to provide a stable platform without limiting frame delivery. Given that the i7-14700K has a Cinebench R23 multi-core score of 33440.5 and a single-core score of 2160, it is far more capable than what this game requires. The recorded data shows that resolution and settings changes produce frame rate shifts that are almost entirely attributable to GPU workload. The CPU's contribution is negligible in this pairing; the GTX 1050 Ti is the decisive component.
Measured FPS Breakdown
The database records average frame rates for four settings presets at three resolutions. Minimum and maximum FPS values are not available for any configuration, so the analysis relies on average frame rates.
At 3840x2160, the frame rates are as follows: Low settings produce 30.9 FPS, Medium settings 20.7 FPS, High settings 19.2 FPS, and Ultra settings 15.7 FPS. The drop from Low to Medium is 10.2 FPS, which is the largest single-step decline at this resolution. The further drop from Medium to High is only 1.5 FPS, and from High to Ultra another 3.5 FPS. The Low setting is the only one that comes close to 30 FPS, but it still falls far short of the 60 FPS threshold.
At 2560x1440, Low settings deliver 46 FPS, Medium 34.3 FPS, High 29.5 FPS, and Ultra 23.9 FPS. The differences between consecutive presets are 11.7 FPS (Low to Medium), 4.8 FPS (Medium to High), and 5.6 FPS (High to Ultra). None of these configurations reach 60 FPS, and even Low settings are 14 FPS below the playability threshold.
At 1920x1080, Low settings achieve 62.5 FPS, Medium 43.3 FPS, High 36.5 FPS, and Ultra 29.7 FPS. The step from Low to Medium is a substantial 19.2 FPS decline, which is the largest single-preset drop across all resolutions. The gap between Medium and High is 6.8 FPS, and between High and Ultra is another 6.8 FPS. Only the Low preset clears the 60 FPS mark, and it does so with a margin of 2.5 FPS.
Comparing across resolutions at the same settings, the scaling is consistent with GPU limitations. At Low settings, 1920x1080 yields 62.5 FPS, 2560x1440 yields 46 FPS, and 3840x2160 yields 30.9 FPS. The resolution increase from 1080p to 1440p reduces frame rate by 16.5 FPS, and from 1440p to 2160p by another 15.1 FPS. At Ultra settings, the frame rates are 29.7, 23.9, and 15.7 FPS for the same resolution progression. The relative drop from 1080p to 2160p is roughly 47% at Ultra settings, indicating that the GPU's fill rate and memory bandwidth are severely strained at higher pixel counts.
The Verdict
The question is whether this PC can run Lockdown Protocol. The recorded data provides a clear answer: it can run the game only at 1920x1080 with Low settings, and even then the margin above 60 FPS is thin.
At 3840x2160, no settings preset is playable. The best result is 30.9 FPS at Low, which is less than half of the 60 FPS threshold. Medium, High, and Ultra all fall below 21 FPS, making the game effectively unplayable at this resolution for smooth gameplay.
At 2560x1440, the situation is similar. The best result is 46 FPS at Low settings, which is 14 FPS short of the threshold. Medium, High, and Ultra produce 34.3, 29.5, and 23.9 FPS respectively. None of these are playable according to the database's definition.
At 1920x1080, the Low preset achieves 62.5 FPS, which is above the 60 FPS playability threshold. This is the only configuration that qualifies. Medium settings drop to 43.3 FPS, High to 36.5 FPS, and Ultra to 29.7 FPS, all below the threshold.
The verdict by resolution is unambiguous: 3840x2160 has no playable settings, 2560x1440 has no playable settings, and 1920x1080 has exactly one playable setting, Low, with an average frame rate of 62.5 FPS. Users seeking higher visual fidelity or higher resolutions would need a more capable GPU than the GTX 1050 Ti.
Best Settings per Resolution
The most demanding preset that stays at or above 60 FPS at each resolution is determined from the measured data.
At 3840x2160, there is no settings preset that reaches 60 FPS. The highest average frame rate is 30.9 FPS at Low settings, which falls well below the threshold. Therefore, no best settings exist for this resolution.
At 2560x1440, the same conclusion applies. Low settings produce 46 FPS, which is below 60 FPS. No preset at this resolution is playable, so there is no best settings recommendation.
At 1920x1080, the Low preset is the only one that clears 60 FPS, with an average frame rate of 62.5 FPS. Medium settings drop to 43.3 FPS, so they are not viable. The best settings for 1080p are Low, and the measured average FPS at those settings is 62.5.
For users who cannot accept Low settings, the alternative is to reduce resolution further, but no lower resolution data is recorded. The database only covers 1920x1080, 2560x1440, and 3840x2160, so no recommendation can be made for other resolutions.
How This Combo Ranks
In the database's overall ranking of tested CPU and GPU combinations for Lockdown Protocol, this pairing sits at rank 3639 out of 3714 total combos. That places it in the bottom 2% of all tested configurations, with roughly 75 other combos performing worse and over 3600 performing better.
The low ranking is almost entirely attributable to the GPU. The GTX 1050 Ti's 25th percentile ranking among all GPUs means that three-quarters of graphics cards in the database outperform it, and its average benchmark score of 4193 is far below that of modern gaming GPUs. The CPU, by contrast, is in the 94th percentile, so the processor is not the limiting factor.
The combination of a very strong CPU and a very weak GPU results in a system that is heavily unbalanced for gaming. The i7-14700K provides ample processing headroom, but the GTX 1050 Ti cannot translate that into high frame rates in this title. The measured frame rates at 1080p Low, 62.5 FPS, are the only playable result, and they are barely above the threshold.
Compared to the 3714 total combos, this system's rank of 3639 indicates that the vast majority of tested configurations deliver better performance in Lockdown Protocol. Users with mid-range or high-end GPUs paired with any recent quad-core or better CPU would likely exceed this system's frame rates at most settings and resolutions.
Similar Performance Alternatives
The nearest rivals for the CPU and GPU provide context for what other hardware would behave similarly in this game.
For the Intel Core i7-14700K, the closest alternatives in average benchmark score are the AMD EPYC 9115, AMD Ryzen 9 7950X, AMD Ryzen 9 7940HX, and AMD Ryzen 7 9700F. The score differences are minimal: the EPYC 9115 is 0.1% behind, the Ryzen 9 7950X is 0.2% ahead, the Ryzen 9 7940HX is 0.7% ahead, and the Ryzen 7 9700F is 0.9% ahead. In practice, any of these CPUs would deliver nearly identical frame rates when paired with the same GTX 1050 Ti, because the GPU is the bottleneck. The CPU choice would only matter if the GPU were upgraded to a much faster model.
For the NVIDIA GeForce GTX 1050 Ti, the nearest rivals are the AMD Radeon R5 M330, NVIDIA Quadro K2100M, NVIDIA Quadro K3000M, and AMD Radeon Vega 3. The score differences are similarly small: the R5 M330 is 0.6% behind, the Quadro K2100M is 1% behind, the Quadro K3000M is 1.1% ahead, and the Radeon Vega 3 is 1.8% ahead. None of these GPUs would change the overall verdict for Lockdown Protocol. They would all produce frame rates in the same general range as the GTX 1050 Ti, meaning that 1080p Low would be the only playable configuration, and even that would be marginal.
In practical terms, anyone with a GTX 1050 Ti or one of its nearest rivals would need to accept that this game is only playable at 1080p with the lowest settings. The CPU is not the limiting factor, so upgrading to a faster processor would not improve frame rates. The only meaningful upgrade path would be a significantly faster GPU, which would shift the balance of the system and likely enable higher settings or resolutions. However, the database does not record data for such alternative pairings, so no specific frame rate predictions can be made beyond the measured results.