Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 14 | 20 | 24 | 30 |
| 1440p QHD | 19 | 26 | 31 | 45 |
| 1080p Full HD | 31 | 36 | 44 | 60 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
Similar Performance Alternatives
The Intel Core i5-14600KF sits in a tight cluster of CPUs based on aggregate benchmark scores. The database places it at the 90th percentile among all CPUs, with an average benchmark score of 49394. Its nearest rivals are separated by less than one percent in either direction. The AMD Ryzen 9 7900 scores 49228, a 0.3 percent gap. The AMD Ryzen 7 PRO 5755G scores 49196, a 0.4 percent difference. The Intel Core Ultra 5 245 scores 48995, trailing by 0.8 percent. On the other side, the AMD Ryzen AI Max+ 388 scores 49796, which is 0.8 percent ahead of the i5-14600KF. In practical terms, any of these four processors would deliver nearly interchangeable frame pacing in Lockdown Protocol when paired with the same graphics card, since the CPU is not the limiting factor in this configuration.
The GPU side tells a very different story. The NVIDIA GeForce GTX 1050 Ti sits at the 25th percentile among all GPUs, with an average benchmark score of 4193. Its nearest rivals are similarly weak performers. The AMD Radeon R5 M330 scores 4170, a 0.6 percent gap. The NVIDIA Quadro K2100M scores 4151, just 1 percent behind. The NVIDIA Quadro K3000M scores 4241, 1.1 percent ahead. The AMD Radeon Vega 3 scores 4268, 1.8 percent ahead. For Lockdown Protocol, any of these GPUs would produce comparable frame rates, meaning the GTX 1050 Ti has no meaningful performance headroom over its closest alternatives. The delta between the best and worst of these rival GPUs is under 3 percent, so users upgrading from one to another would see no measurable improvement in this game.
FAQ
Q: What is the CPU's multi-core performance in Cinebench R23?
A: The Intel Core i5-14600KF scores 32544 in Cinebench R23 multi-core and 4594 in single-core. Its Cinebench R20 results are 13668 multi-core and 1929 single-core.
Q: How much memory bandwidth does the GTX 1050 Ti have?
A: The GPU has 4 GB of GDDR5 memory on a 128-bit bus, providing 112.1 GB/s of bandwidth. Its memory clock is 1752 MHz, which translates to 7 Gbps effective.
Q: What is the GPU's DirectX support level?
A: The GTX 1050 Ti supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. It has 768 shading units, 48 texture mapping units, and 32 raster output units.
Q: What power supply does the GTX 1050 Ti require?
A: The GPU has a 75 W TDP and the database suggests a 250 W power supply. It requires no power connectors and is a dual-slot card measuring 145 mm in length.
Q: How does the CPU compare to the Ryzen 9 7900?
A: The i5-14600KF has an average benchmark score of 49394, while the Ryzen 9 7900 scores 49228. This puts the Intel chip 0.3 percent ahead, a negligible difference in real-world gaming.
Q: What is the highest playable settings preset at 1080p?
A: At 1920x1080, no preset reaches the 60 FPS threshold. The Low preset averages 59.8 FPS, which is just below the playable threshold of 60 FPS.
Measured FPS Breakdown
The recorded data shows a clear pattern: this combo struggles to maintain playable frame rates at every resolution. The measurements cover four settings presets (Low, Medium, High, Ultra) at three resolutions. All values are average FPS, with no minimum or maximum recorded.
At 3840x2160, the results are uniformly low. The Low preset averages 30.1 FPS. Medium drops to 23.8 FPS. High falls further to 20.3 FPS. Ultra bottoms out at 13.7 FPS. None of these come close to the 60 FPS threshold, and even the best case is half of what is needed for smooth gameplay.
At 2560x1440, the situation improves slightly but remains far from playable. Low averages 44.7 FPS. Medium drops to 30.7 FPS. High averages 26.4 FPS. Ultra falls to 18.9 FPS. The Low preset is the only one that approaches a usable frame rate, but it still falls well short of the 60 FPS target.
At 1920x1080, the results show the best performance of any configuration, but still no preset clears 60 FPS. Low averages 59.8 FPS, a hair below the threshold. Medium averages 44.1 FPS. High averages 36.2 FPS. Ultra averages 31.4 FPS. The gap between Low and Medium is 15.7 FPS, which is substantial. The gap between High and Ultra is 4.8 FPS, a smaller step.
The scaling pattern across resolutions is consistent. Moving from 1080p to 1440p at the same preset costs roughly 25 percent of the frame rate. Moving from 1440p to 2160p costs another 30 to 35 percent. The GPU's 4 GB memory buffer and 112.1 GB/s bandwidth are the likely constraints at higher resolutions, though the database does not isolate those variables.
The Verdict
The short answer is no. This PC cannot run Lockdown Protocol at a playable level in any tested configuration. The playable threshold is set at 60 FPS, and the verdict by resolution lists no playable settings for any resolution.
At 3840x2160, the best average is 30.1 FPS on Low. That is exactly half the threshold. Ultra runs at 13.7 FPS, which is below what most users would consider acceptable for any genre, let alone a fast-paced FPS.
At 2560x1440, the best average is 44.7 FPS on Low. This is closer but still 15.3 FPS short of the threshold. Medium and above all fall below 31 FPS.
At 1920x1080, the best average is 59.8 FPS on Low. This is the closest any preset comes to the threshold, but it still misses by 0.2 FPS. Medium runs at 44.1 FPS, High at 36.2 FPS, and Ultra at 31.4 FPS.
The data indicates that the GTX 1050 Ti is the primary bottleneck. The i5-14600KF sits at the 90th CPU percentile and has ample compute headroom, but the GPU sits at the 25th percentile. Even at the lowest settings and lowest resolution, the combo cannot sustain 60 FPS. Users would need to either lower the resolution below 1080p (not tested in the database) or accept frame rates in the 30 to 45 range with reduced settings.
How This Combo Ranks
The database ranks this combination at 3660 out of 3714 tested combos for Lockdown Protocol. That places it in the bottom 1.5 percent of all tested configurations. The percentile ranking tells a consistent story: this is one of the weakest combinations in the entire database for this game.
The CPU does not contribute to this poor ranking. The i5-14600KF is a top-tier processor by benchmark standards, and its nearest rivals are all within 1 percent of its aggregate score. The GPU, however, is severely underpowered for this title. The GTX 1050 Ti sits at the 25th percentile among all GPUs, and its nearest rivals are all similarly low-end parts.
The combination of a high-end CPU with a low-end GPU is a classic imbalance. The CPU is ready to feed frames, but the GPU cannot render them quickly enough. The result is a system that underperforms even relative to its weakest component. A more balanced pairing, such as the i5-14600KF with a mid-range GPU, would rank dramatically higher, but that is not the configuration tested here.
Best Settings per Resolution
The database lists no best settings for any resolution because no preset achieves the 60 FPS threshold. The "best settings" field is null for all three resolutions, and the "avgFpsAtBest" is also null. This is a definitive outcome: there is no configuration in the tested matrix that delivers playable performance.
For users who must play at 1920x1080, the Low preset at 59.8 FPS is the closest option. It is notably this is 0.2 FPS below the threshold, which in practice may feel smooth enough depending on the scene, but the database does not classify it as playable.
For 2560x1440, the Low preset at 44.7 FPS is the most playable option, but it will require significant compromises in visual quality. For 3840x2160, the Low preset at 30.1 FPS is the only option above 30 FPS, and it will look noticeably degraded.
The takeaway is unambiguous: this hardware combination is not suitable for Lockdown Protocol at any tested resolution or settings level. The GPU's 4 GB memory and 2.138 TFLOPS of FP32 compute are simply insufficient for this title's demands. Users seeking playable frame rates would need to upgrade the GPU to a model with substantially higher performance, as the CPU has ample headroom to support a much faster graphics card.