Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 14 | 16 | 24 | 28 |
| 1440p QHD | 20 | 29 | 30 | 44 |
| 1080p Full HD | 27 | 39 | 46 | 59 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
Intel Core i5-14600K and NVIDIA GeForce GTX 1050 Ti is a severely mismatched pairing for Lockdown Protocol. The recorded data shows this combination cannot reach 60 FPS at any resolution or preset level, making it unsuitable for smooth play. The GTX 1050 Ti is the clear bottleneck, as its average benchmark score places it in the 25th percentile of all GPUs, while the Core i5-14600K sits in the 90th percentile of CPUs. Even at 1080p Low, the measured average FPS is 58.7, just shy of the 60 FPS playability threshold. The verdict is straightforward: this PC fails to run Lockdown Protocol at playable frame rates across all tested configurations.
Best Settings per Resolution
For Lockdown Protocol, the playability threshold is defined as 60 FPS or higher. The measured data shows that no settings combination at any resolution reaches this target with the Intel Core i5-14600K and GTX 1050 Ti. Therefore, there is no "best settings" that achieves a playable frame rate. The closest to 60 FPS is 1920x1080 with Low settings, which produces an average of 58.7 FPS. This falls short of the 60 FPS minimum, meaning users would experience occasional dips below the target during intense gameplay moments. At 2560x1440, the highest average FPS is 43.5 on Low settings, while at 3840x2160, Low settings yield only 27.6 FPS. In all cases, the GPU cannot sustain the required performance for a smooth experience.
FAQ
Q: Can the Intel Core i5-14600K and GTX 1050 Ti run Lockdown Protocol at 60 FPS?
A: No. According to the database measurements, no resolution or preset combination reaches 60 FPS. The best result is 58.7 FPS at 1920x1080 Low settings, which is below the 60 FPS playable threshold.
Q: What is the highest average frame rate recorded for this combo?
A: The highest average FPS recorded is 58.7 at 1920x1080 with Low settings. All other settings at this resolution produce lower averages: Medium yields 46.2 FPS, High yields 39.3 FPS, and Ultra yields 27.2 FPS.
Q: How does the GTX 1050 Ti perform compared to other GPUs in the database?
A: The GTX 1050 Ti scores in the 25th percentile of all GPUs, with an average benchmark score of 4193. Its nearest rivals include the AMD Radeon R5 M330 (0.6% higher score), NVIDIA Quadro K2100M (1% higher), NVIDIA Quadro K3000M (1.1% lower), and AMD Radeon Vega 3 (1.8% lower).
Q: Is the CPU or GPU the limiting factor in this pairing?
A: The GPU is the limiting factor. The Intel Core i5-14600K ranks in the 90th percentile of all CPUs with an average benchmark score of 48618, while the GTX 1050 Ti only reaches the 25th percentile. The CPU has 14 cores, 20 threads, and a boost clock of 5.30 GHz, far exceeding the demands of the GTX 1050 Ti.
Q: How does this combo rank among all tested combinations for Lockdown Protocol?
A: This combination ranks 3697 out of 3714 tested combos, placing it in the bottom 0.5% of systems. This indicates that nearly all other hardware pairings perform better for this game.
Q: Are there any settings where the frame rate approaches 60 FPS?
A: At 1920x1080 Low, the average FPS is 58.7, which is within 1.3 FPS of the 60 FPS target. However, this still does not meet the playable threshold, and any increase in settings drops the average to 46.2 FPS or lower.
Measured FPS Breakdown
The recorded data provides average FPS values for each resolution and settings combination. No minimum or maximum FPS values were recorded, so the analysis relies on averages. At 3840x2160, the GTX 1050 Ti produces 27.6 FPS on Low, 24.1 FPS on Medium, 15.8 FPS on High, and 13.9 FPS on Ultra. These numbers indicate that 4K gaming is entirely impractical for this GPU, as even the lowest settings barely exceed 25 FPS. At 2560x1440, performance improves but remains insufficient: Low settings hit 43.5 FPS, Medium drops to 30.0 FPS, High reaches 28.5 FPS, and Ultra falls to 20.0 FPS. The gap between Low and Medium is substantial, showing that the GPU's memory bandwidth of 112.1 GB/s and 4 GB GDDR5 capacity become limiting factors quickly.
At 1920x1080, the most commonly used resolution, the results are closer to playable but still fall short. Low settings deliver 58.7 FPS, which is the best recorded result across all configurations. Medium settings produce 46.2 FPS, a drop of 12.5 FPS from Low, while High settings yield 39.3 FPS, and Ultra plummets to 27.2 FPS. The pattern is consistent: each settings tier costs roughly 8 to 12 FPS, and the GPU cannot overcome the demands of higher presets. The GTX 1050 Ti's 768 shading units and 32 ROPs are simply insufficient for Lockdown Protocol's rendering requirements. The data shows that even at the lowest settings, the system operates at the edge of playability, with no headroom for stable 60 FPS performance.
How This Combo Ranks
In the database of tested combinations for Lockdown Protocol, the Intel Core i5-14600K and GTX 1050 Ti ranks 3697 out of 3714 combos. This places it in the bottom 0.5% of all systems tested, meaning only 17 combinations perform worse. The ranking reflects the GPU's severe performance limitations, as the CPU's capabilities are largely wasted in this pairing. The Core i5-14600K's average benchmark score of 48618 places it in the 90th percentile of all CPUs, but the GTX 1050 Ti's score of 4193 represents only the 25th percentile. This imbalance creates a situation where the CPU can process game logic and physics far faster than the GPU can render frames. Consequently, the system's overall performance is dictated entirely by the GPU, dragging the combo ranking down to near the bottom of the database.
For context, the CPU alone benchmarks similarly to the Intel Xeon Gold 5318H (0.2% lower score), AMD EPYC 4345P (0.3% higher), Intel Core Ultra 5 245HX (0.7% higher), and Intel Core Ultra 5 245 (0.8% lower). Meanwhile, the GPU benchmarks within 1.8% of the AMD Radeon R5 M330, NVIDIA Quadro K2100M, NVIDIA Quadro K3000M, and AMD Radeon Vega 3. These comparisons show that the CPU is a high-end part while the GPU is entry-level, and the combo ranking of 3697 accurately captures this mismatch. Users seeking playable frame rates would need to upgrade the GPU substantially, as the CPU has ample headroom for more powerful graphics cards.
Similar Performance Alternatives
Based on the nearest rival data for the CPU and GPU, users can expect similar overall performance from hardware that benchmarks within a few percent of this pairing. The Intel Core i5-14600K's closest rivals are the Intel Xeon Gold 5318H, AMD EPYC 4345P, Intel Core Ultra 5 245HX, and Intel Core Ultra 5 245, all of which score within 0.8% of the i5-14600K's average benchmark score. Any of these CPUs paired with the GTX 1050 Ti would produce nearly identical frame rates in Lockdown Protocol, as the GPU remains the bottleneck. On the GPU side, the AMD Radeon R5 M330, NVIDIA Quadro K2100M, NVIDIA Quadro K3000M, and AMD Radeon Vega 3 all benchmark within 1.8% of the GTX 1050 Ti. Swapping the GPU for any of these would result in similar FPS values, typically within 1 to 2 frames at each settings level.
For users considering alternatives, the data suggests that upgrading the GPU alone would yield the most significant improvements. Pairing the Core i5-14600K with a more capable GPU would allow the CPU's 90th percentile performance to manifest, potentially enabling playable frame rates. However, the current pairing shows that the GPU's 25th percentile ranking is the dominant factor. The measured FPS at 1080p Low (58.7) is only 1.3 FPS below the playable threshold, indicating that a GPU with a modest performance increase could cross the 60 FPS line. Conversely, upgrading the CPU while keeping the GTX 1050 Ti would produce negligible gains, as the recorded data shows the GPU is already saturated at all settings.
The Verdict
The Intel Core i5-14600K and NVIDIA GeForce GTX 1050 Ti cannot run Lockdown Protocol at playable frame rates. The verdict by resolution is clear: at 3840x2160, 2560x1440, and 1920x1080, there are no playable settings, meaning no configuration reaches 60 FPS. The best recorded result is 58.7 FPS at 1920x1080 Low, which falls 1.3 FPS short of the threshold. At 2560x1440, the maximum average is 43.5 FPS on Low, and at 3840x2160, the maximum is 27.6 FPS on Low. These numbers confirm that the GTX 1050 Ti is the limiting factor, as the Core i5-14600K provides more than enough processing power. The combo ranks 3697 out of 3714 tested systems, reinforcing its position among the weakest configurations for this game.
Users with this hardware should expect sub-60 FPS performance even at the lowest settings. Reducing resolution below 1920x1080 might improve frame rates, but no such measurements are recorded in the database. The GPU's 4 GB memory capacity and 112.1 GB/s bandwidth constrain texture loading and scene complexity, while its 2.138 TFLOPS FP32 performance limits shading throughput. The CPU's 24 MB of shared L3 cache and 5.30 GHz boost clock cannot compensate for these GPU limitations. For a playable experience, upgrading the GPU is mandatory, as the CPU has substantial headroom for a more powerful graphics card. The data indicates that this pairing is fundamentally unbalanced, with the GPU holding back a high-end processor.