Lockdown Protocol

The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 3070 delivers a consistently strong experience in Lockdown Protocol, clearing the 60 FPS threshold at every resolution tested, though the margin of comfort shrinks dramatically at 4K Ultra. The data shows the combo is a versatile 1440p and 1080p performer, with 4K requiring a slight settings adjustment to maintain high frame rates.

Measured FPS Breakdown

The measured frame rates reveal a clear pattern: this hardware combination scales predictably with resolution, and the impact of the graphics preset is substantial at every tier. At 1920x1080, the system is rarely challenged. The Low preset produces an average of 217.8 FPS, which is more than triple the 60 FPS playability threshold. Stepping up to Medium yields 152.4 FPS, while the High preset still holds a commanding 132.6 FPS average. Even the most demanding Ultra preset at 1080p keeps the average at 102.7 FPS, indicating that the RTX 3070 has ample headroom at this resolution for high-refresh-rate displays.

Moving to 2560x1440, the performance remains robust but the scaling starts to show. The Low preset delivers a very high 158.8 FPS average, which is only about 27% lower than the 1080p Low result. Medium at 1440p averages 111.1 FPS, and High drops to 98.4 FPS. The Ultra preset at 1440p is the first point where the frame rate dips below the triple-digit mark, posting a 75.1 FPS average. This is still comfortably above 60 FPS, but the delta between Low and Ultra at this resolution is 83.7 FPS, showing a significant performance cost for maximum visual fidelity.

The 3840x2160 results are where the hardware begins to feel the pressure. At 4K Low, the average is 104 FPS, which is still excellent and proves the CPU-GPU combination can handle high frame rates even at this demanding resolution when settings are light. Medium at 4K drops to 74 FPS, and High manages a 64 FPS average, just barely clearing the 60 FPS threshold. The Ultra preset at 4K is the only configuration in the entire dataset that fails to hit 60 FPS, with an average of 49.8 FPS. This represents a 54.2 FPS drop from the Low preset at the same resolution, illustrating a steep curve where the RTX 3070’s 8 GB memory and bandwidth become limiting factors at maximum settings. No minimum or maximum FPS data was recorded for any configuration, leaving the analysis reliant on average scores alone.

FAQ

*Q: Can this PC run Lockdown Protocol at 4K resolution?*

A: Yes, the data shows playable frame rates at 4K, but only up to the High preset. The average FPS at 4K High is 64, which clears the 60 FPS threshold, while the Ultra preset drops to 49.8 FPS and is not playable.

Q: What is the best settings preset at 2560x1440?

A: The Ultra preset is the best choice at 1440p, delivering a 75.1 FPS average. All four presets (Low, Medium, High, Ultra) at this resolution are above the 60 FPS playable threshold.

Q: Is the RTX 3070 or the Ryzen 9 5950X more important for high FPS at 1080p?

A: At 1080p, the data indicates the GPU is the primary bottleneck, as the CPU is able to feed frames up to 217.8 FPS on Low. The wide spread between Low and Ultra presets (115.1 FPS difference) shows that the graphics card’s workload is the main variable.

Q: How much of a frame rate drop occurs when moving from 1080p to 4K on the High preset?

A: The average FPS drops from 132.6 at 1080p High to 64 at 4K High, a reduction of 68.6 FPS. This represents a roughly 52% decrease in performance when quadrupling the pixel count.

Q: Does the 5950X bottleneck the RTX 3070 in this game?

A: The benchmark data does not show evidence of a CPU bottleneck. At 1080p Low, the system reaches 217.8 FPS, which is a high frame rate that would stress many CPUs, but the 16-core processor handles it, allowing the GPU to be the limiting factor.

Q: Which resolution and preset combination provides the highest average frame rate?

A: The highest average frame rate in the dataset is achieved at 1920x1080 with the Low preset, posting 217.8 FPS. This is followed by 1440p Low at 158.8 FPS and 1080p Medium at 152.4 FPS.

CPU and GPU Roles

The performance scaling across resolutions and presets clearly delineates the roles of the AMD Ryzen 9 5950X and the NVIDIA GeForce RTX 3070 in Lockdown Protocol. At 1920x1080, the CPU’s capability is evident; the transition from Low to Ultra settings only reduces the average frame rate from 217.8 to 102.7 FPS. This shows that the processor can maintain very high frame rates, and the GPU is doing the heavy lifting when settings increase. The Ryzen 9 5950X, with its 16 cores and 32 threads, provides enough single-thread and multi-thread performance to keep the GPU fed, as evidenced by the 1080p Low result exceeding 200 FPS.

As resolution increases to 2560x1440, the GPU workload becomes more demanding, but the CPU remains sufficient. The frame rate drop from 1080p to 1440p is moderate across all presets; for example, High settings drop from 132.6 to 98.4 FPS. This indicates that the RTX 3070 is still the primary performance limiter, but the processor is keeping pace. At 1440p Ultra, the 75.1 FPS average shows that the GPU is working harder, yet the CPU is not holding it back.

The picture changes at 3840x2160. Here, the GPU is the dominant constraint. The gap between Low and Ultra presets widens dramatically, with averages of 104 and 49.8 FPS respectively. This 54.2 FPS spread is the largest in the dataset, indicating that the RTX 3070’s rendering throughput is saturated at 4K, especially with higher visual fidelity. The CPU’s role diminishes at this resolution because the frame rate is capped by the GPU’s pixel output. The data suggests that the Ryzen 9 5950X is more than capable of handling the game’s logic and draw calls at 4K, but the RTX 3070 cannot maintain high frame rates with Ultra settings at this pixel count. The scaling between 1440p and 4K on the High preset (98.4 to 64 FPS) further confirms that the GPU is the bottleneck, as the resolution increase impacts the GPU far more than the CPU.

The Verdict

The verdict from the measured data is unambiguous: this PC can run Lockdown Protocol successfully at all three tested resolutions, with the condition that the settings are adjusted appropriately for 4K. At 1920x1080, the system is fully playable across all presets, with the Ultra preset achieving a 102.7 FPS average, which is well above the 60 FPS playable threshold. This is the ideal resolution for the RTX 3070, providing high frame rates even at maximum settings.

At 2560x1440, the combo also clears 60 FPS on every preset. The Ultra preset’s average of 75.1 FPS is the lowest result at this resolution, but it remains comfortably in playable territory. This makes 1440p the sweet spot for this hardware, offering a significant visual upgrade over 1080p without sacrificing smoothness, even at the highest settings.

For 3840x2160, the verdict is more nuanced. The data shows that High settings are the best playable option, with an average of 64 FPS. The Low and Medium presets also clear 60 FPS, posting 104 and 74 FPS respectively. However, the Ultra preset fails to reach 60 FPS, with a 49.8 FPS average, making it unplayable by the dataset’s standard. The best settings at 4K are High, which balances visual quality with a frame rate that just clears the threshold. Users targeting 4K should avoid the Ultra preset unless they are willing to accept sub-60 FPS performance.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 9 5950X’s nearest rivals in benchmark scores are all Intel and AMD server and desktop parts. The Intel Core Ultra 5 235HX has an average score of 52073, which is 0.2% lower than the 5950X, making it a near-identical performer. The AMD EPYC 8124P scores 52121, a negligible 0.3% difference. The Intel Core i9-13900F scores 51730, which is 0.4% higher, and the Intel Core i7-14700 scores 52301, which is 0.7% higher. These CPUs would all behave similarly in Lockdown Protocol, providing equivalent frame rates in scenarios where the processor is not the bottleneck.

On the GPU side, the NVIDIA GeForce RTX 3070’s nearest rivals include the AMD Radeon RX 7600 XT, which has an average score of 17083, representing a 0.7% difference. The NVIDIA GeForce GTX 690 scores 17037, a 1% difference, and the AMD Radeon HD 7970M scores 17019, a 1.1% difference. The NVIDIA Tesla K40c scores 17468, which is 1.5% higher. For gaming, the RX 7600 XT is the most relevant alternative, as it would produce nearly identical FPS numbers in Lockdown Protocol at all resolutions and settings. The other rivals are older or workstation-oriented parts, but the data indicates they would deliver similar average frame rates in this game.

How This Combo Ranks

The combination of the AMD Ryzen 9 5950X and the NVIDIA GeForce RTX 3070 ranks 1487 out of 3714 tested combinations in Lockdown Protocol. This places it in the top 40% of all systems tested, which is a solid position given the GPU’s mid-range status. The percentile rankings of the individual components reinforce this: the CPU sits in the 91st percentile among all CPUs, while the GPU is in the 61st percentile among all GPUs. This asymmetry suggests that the overall combo ranking is dragged down by the GPU, which is the weaker link for this game.

The rank of 1487 out of 3714 indicates that there are many faster system configurations, but it also shows that this combo outperforms a majority of the tested setups. The data implies that the 5950X is punching above its weight class when paired with the RTX 3070, as the CPU’s high percentile ranking helps the system achieve a better overall position than a weaker processor would allow. For a user with a 5950X, the RTX 3070 is a reasonable match that provides good 1080p and 1440p performance, but the combo ranking suggests that upgrading the GPU would yield a more significant improvement in Lockdown Protocol than upgrading the CPU. The system’s ability to hit 60 FPS at 4K High, despite the GPU’s mid-pack percentile, confirms the CPU’s strong performance in feeding frames.