Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 14 | 18 | 21 | 29 |
| 1440p QHD | 21 | 28 | 32 | 45 |
| 1080p Full HD | 29 | 38 | 44 | 61 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
Measured FPS Breakdown
The recorded data for Lockdown Protocol with the AMD Ryzen 7 9700F and NVIDIA GeForce GTX 1050 Ti shows a steep performance cliff as resolution climbs. At 3840x2160, the combination never approaches a smooth experience. On High settings the average is 18 FPS, on Medium the average is 21 FPS with a recorded range of 18 to 24 FPS, Low produces 29 FPS, and Ultra drops to 14 FPS. None of these numbers are within reach of a playable frame rate, and the min/max spread on Medium indicates the GPU is fully saturated with little headroom.
Moving to 2560x1440, the picture improves but remains firmly below the 60 FPS threshold. Low settings deliver an average of 45 FPS, High drops to 28 FPS, Medium lands at 32 FPS with a range of 27 to 37 FPS, and Ultra sits at 21 FPS. The jump from 4K to 1440p yields roughly a 55% improvement on Low settings, from 29 FPS to 45 FPS, which shows that resolution scaling is a major factor for this GPU. Still, even the best preset at this resolution misses the playable mark by a wide margin.
At 1920x1080, the data finally shows a usable configuration. Low settings hit an average of 61 FPS, just clearing the 60 FPS threshold. Medium averages 44 FPS with a range of 37 to 50 FPS, High averages 38 FPS, and Ultra averages 29 FPS. The gap between Low and Medium is 17 FPS, which is substantial and suggests that the GTX 1050 Ti's 4 GB frame buffer and 112.1 GB/s memory bandwidth are limiting factors once texture quality and shading complexity increase. The difference between 1440p Low and 1080p Low is 16 FPS, again confirming that pixel count is the dominant variable for this pairing.
Best Settings per Resolution
For 3840x2160, no settings combination in the database reaches 60 FPS. The highest recorded average is 29 FPS on Low, which is less than half of the playable threshold. The verdict for this resolution is clear: the GTX 1050 Ti does not have the rendering throughput to support Lockdown Protocol at 4K, regardless of quality reduction.
At 2560x1440, the same conclusion applies. Low settings produce the best average at 45 FPS, but that still leaves a 15 FPS deficit. Medium and High are progressively worse, and Ultra is far below any acceptable range. The database shows no playable settings for this resolution.
At 1920x1080, Low is the only preset that clears the 60 FPS line, with an average of 61 FPS. This is the single playable configuration in the entire measured set. Medium, High, and Ultra all fall short: 44 FPS, 38 FPS, and 29 FPS respectively. The data indicates that players should target 1080p with the lowest quality preset to maintain a steady frame rate, and even then the margin is only 1 FPS above the threshold, leaving little room for scene complexity spikes.
CPU and GPU Roles
The AMD Ryzen 7 9700F is a high-end desktop processor with 8 cores and 16 threads, a boost clock of 5.50 GHz, and a PassMark multithread score of 36470. Its percentile versus all CPUs is 94, meaning it outperforms the vast majority of processors in the database. The GPU, by contrast, is a GeForce GTX 1050 Ti with a PassMark G3D score of 6340 and a percentile versus all GPUs of 25, placing it in the lower quarter of tested graphics cards. The bottleneck in this pairing is overwhelmingly the GPU.
The scaling data supports this. At 1080p Low, the CPU has ample headroom, yet the frame rate is only 61 FPS. When resolution increases to 1440p Low, performance drops by 26% to 45 FPS, and at 4K Low it falls another 36% to 29 FPS. This pattern is characteristic of a GPU-bound scenario: the processor's capability is constant, but the graphics card's pixel throughput declines sharply as resolution rises. The Ryzen 7 9700F's single-thread score of 4691 and floating-point score of 77955 are more than sufficient for Lockdown Protocol's demands; the limiting factor is the GTX 1050 Ti's 2.138 TFLOPS FP32 throughput and 4 GB GDDR5 memory.
Preset scaling tells the same story. At 1080p, moving from Low to Medium costs 17 FPS, from Medium to High costs 6 FPS, and from High to Ultra costs 9 FPS. The largest single drop occurs between Low and Medium, which suggests that the GPU's memory bandwidth (112.1 GB/s) and texture units (48 TMUs) are overwhelmed when higher-quality assets are loaded. The CPU's role is essentially static across these changes; the recorded deltas are entirely attributable to GPU workload.
The Verdict
Can this PC run Lockdown Protocol? The answer is conditional and narrow. At 1920x1080 with Low settings, yes: the measured average is 61 FPS, which clears the 60 FPS playable threshold. This is the only configuration in the database that achieves playability. At the same resolution, Medium (44 FPS), High (38 FPS), and Ultra (29 FPS) all fail to reach 60 FPS.
At 2560x1440, the system cannot run the game at a playable frame rate under any preset. The best option, Low, yields 45 FPS, which is 15 FPS short of the threshold. At 3840x2160, the situation is worse: Low produces 29 FPS, and Ultra drops to 14 FPS. The verdict by resolution is unambiguous: 1080p Low is the sole playable setting, and even that is marginal with only a 1 FPS buffer.
The Ryzen 7 9700F is not the constraint. Its benchmark scores place it in the top 6% of CPUs, and its nearest rivals, such as the AMD Ryzen 9 7940HX (0.2% delta) and Intel Core i7-14700KF (-0.2% delta), show that the processor is performing at expected levels. The GTX 1050 Ti, however, is an end-of-life GPU from 2016 with a 25th percentile rank, and its nearest rivals include the AMD Radeon R5 M330 (0.6% delta) and NVIDIA Quadro K2100M (1% delta), which are entry-level or mobile-class parts. This is a fundamental mismatch between a modern high-end CPU and a legacy low-end GPU.
FAQ
Q: What is the highest average FPS recorded for this combination?
A: The highest average is 61 FPS, achieved at 1920x1080 with Low settings. This is the only configuration that meets or exceeds the 60 FPS playable threshold.
Q: Can this system run Lockdown Protocol at 2560x1440?
A: No. The best result at 1440p is 45 FPS on Low settings, which is below the 60 FPS threshold. Medium averages 32 FPS, High averages 28 FPS, and Ultra averages 21 FPS.
Q: How does the CPU compare to its nearest rivals?
A: The AMD Ryzen 7 9700F has an average benchmark score of 69996. Its nearest rival, the AMD Ryzen 9 7940HX, scores 69875, a 0.2% delta. The Intel Core i7-14700KF scores 70163, a -0.2% delta, and the AMD Ryzen 9 7950X scores 69515, a 0.7% delta. The CPU is performing consistently with its peers.
Q: How does the GPU compare to its nearest rivals?
A: The GTX 1050 Ti has an average benchmark score of 4193. The AMD Radeon R5 M330 scores 4170 (0.6% delta), the NVIDIA Quadro K2100M scores 4151 (1% delta), and the NVIDIA Quadro K3000M scores 4241 (-1.1% delta). The GPU is statistically indistinguishable from these low-end parts.
Q: What is the frame rate range on Medium settings at 1080p?
A: At 1920x1080 with Medium settings, the recorded range is 37 to 50 FPS, with an average of 44 FPS. This is below the 60 FPS threshold.
Q: Is the 4K performance playable under any setting?
A: No. At 3840x2160, the best average is 29 FPS on Low, and the worst is 14 FPS on Ultra. Medium ranges from 18 to 24 FPS with a 21 FPS average. All results are far below playability.
How This Combo Ranks
In the database's overall ranking for Lockdown Protocol, this combination of AMD Ryzen 7 9700F and NVIDIA GeForce GTX 1050 Ti sits at rank 3661 out of 3714 tested combos. That places it in the bottom 1.4% of all configurations, which is consistent with the measured FPS data. The GPU's 25th percentile rank drags the entire system down despite the CPU's 94th percentile rank.
The ranking reflects the severe imbalance of this pairing. A processor with a PassMark multithread score of 36470 and a single-thread score of 4691 is paired with a GPU that manages only 2.138 TFLOPS of FP32 compute. In a game like Lockdown Protocol, which is an FPS title that relies heavily on GPU rasterization and texture filtering, the graphics card becomes the sole determinant of playability. The CPU's nearest rivals, all within 1% of its average score, would not change the outcome; the bottleneck is entirely on the graphics side.
For context, the GPU's nearest rivals in the database are all low-power or older mobile parts, and its PassMark G3D score of 6340 is roughly a third of what modern mid-range GPUs achieve. The measured results, with a maximum of 61 FPS at 1080p Low and a minimum of 14 FPS at 4K Ultra, are exactly what this ranking predicts. The combo is functional only at the lowest resolution and quality settings, and any increase in graphical load pushes it decisively below the playable threshold. This is a system for 1080p esports-style play at minimal detail, not for high-fidelity or high-resolution sessions.