Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Lockdown Protocol
FPS 2024

Lockdown Protocol

60%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
131 FPS
Ultra 1080p Measured
60 FPS

1440p (2K / QHD)

Low 1440p Measured
97 FPS
Ultra 1440p Measured
43 FPS

4K (Ultra HD)

Low 4K Measured
64 FPS
Ultra 4K Measured
26 FPS
12.8ms Frame Time
19ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 33,079
Graphics Card
Required 27,646
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 39 47 64
1440p QHD 43 58 70 97
1080p Full HD 60 78 93 131

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 78
1920x1080 Low 131
1920x1080 Medium 93
1920x1080 Ultra 60
2560x1440 High 58
2560x1440 Low 97
2560x1440 Medium 70
2560x1440 Ultra 43
3840x2160 High 39
3840x2160 Low 64
3840x2160 Medium 47
3840x2160 Ultra 26

Performance Analysis: Lockdown Protocol on Your System

This PC configuration, pairing an AMD Ryzen 7 7800X3D with an NVIDIA GeForce GTX 1070, delivers a wide spread of performance in Lockdown Protocol, ranging from highly playable at 1080p to demanding at 4K. The recorded data shows that the system's capability is heavily dictated by resolution and quality preset, with the 8 GB GTX 1070 acting as the primary constraint at higher settings.

Measured FPS Breakdown

The recorded FPS data for this combo spans three resolutions and four quality presets. At 1920x1080, the system performs strongly across the board. The Low preset delivers an average of 130.9 FPS, which is the highest frame rate recorded for this configuration. Moving up the quality ladder, the Medium preset averages 93 FPS, and the High preset still holds a solid 78.4 FPS. The most demanding setting at this resolution, Ultra, drops to exactly 60 FPS on average, which remains at the playable threshold.

At 2560x1440, the performance envelope tightens. The Low preset still provides a very comfortable 96.8 FPS average. The Medium preset remains fluid at 70.4 FPS, while the High preset falls to 58.1 FPS, just below the 60 FPS playable line. The Ultra preset at this resolution averages 43.1 FPS, which is noticeably less smooth for a fast-paced FPS.

At 3840x2160, the GTX 1070's limitations become clear. The Low preset is the only one that clears the 60 FPS mark, averaging 64 FPS. The Medium preset drops to 46.8 FPS, High falls to 39.4 FPS, and Ultra sinks to 26.3 FPS. The data indicates that 4K gaming with this GPU is only viable on the lowest settings.

Across all tests, the scaling between presets is consistent. At 1080p, the jump from Low to Ultra costs roughly 70 FPS on average. At 1440p, that same preset swing costs over 50 FPS. At 4K, the difference between Low and Ultra is nearly 38 FPS, showing that the GPU is the bottleneck when pixel count rises.

How This Combo Ranks

In the database, this specific CPU and GPU pairing ranks at 3067 out of 3714 tested combinations for Lockdown Protocol. That places it in the lower 18% of all tested systems, which aligns with the fact that the GTX 1070 is an older, end-of-life graphics card. The CPU, however, is a modern high-end part, so the ranking primarily reflects the GPU's age and performance tier.

The data indicates that this combo is not competitive with modern mid-range or high-end systems. The 47th percentile ranking for the GTX 1070 among all GPUs in the database confirms that it sits below average in overall compute capability. The Ryzen 7 7800X3D, by contrast, sits in the 83rd percentile among all CPUs. The large gap between the CPU's relative strength and the GPU's relative weakness explains why the combo's rank is so low: the system is held back by the graphics card in a game that scales heavily with GPU load.

Importantly, the measured FPS at 1080p Ultra (60 FPS) shows that the CPU can feed the GPU sufficiently at that resolution. The fact that 4K Ultra drops to 26.3 FPS is not a CPU limitation; it is the GTX 1070 running out of bandwidth and shader power. The ranking reflects this imbalance, placing the combo far below systems with more balanced modern GPUs.

Similar Performance Alternatives

Looking at the nearest rivals in the database provides context for what other hardware would behave similarly. The Ryzen 7 7800X3D's closest performance matches are the AMD Ryzen 7 8700G, the Intel Core i7-13650HX, and the AMD Ryzen 7 7745HX, all with an average benchmark score difference of 0%. The AMD Ryzen 9 PRO 6950H trails by only 0.4%. In practical terms, swapping the 7800X3D for any of these CPUs would result in nearly identical frame rates in Lockdown Protocol, since the game is not CPU-bound at most settings with this GPU.

On the GPU side, the GTX 1070's nearest rivals are the AMD FirePro W5000 (0.2% slower), the NVIDIA Quadro M2000M (0.5% slower), the NVIDIA Tesla M10 (0.6% faster), and the NVIDIA Tesla C2070 (0.7% faster). These are not gaming cards, but the database scores show they have similar compute throughput. For a gamer, the practical takeaway is that the GTX 1070 sits in a performance class that is roughly 47th percentile among all GPUs. Any modern GPU in the same score band would deliver similar results; the data does not suggest that a different older card would meaningfully improve the experience.

For a user considering an upgrade, the data implies that replacing the GPU with a newer, higher-percentile card would have a far larger impact than swapping the CPU. The CPU is already in the top quartile, whereas the GPU is below average.

The Verdict

The recorded verdict data is clear: this PC can run Lockdown Protocol, but only at specific resolutions and presets. At 1920x1080, the system clears the 60 FPS threshold on all four presets. High averages 78.4 FPS, Medium averages 93 FPS, Low averages 130.9 FPS, and even Ultra sits exactly at 60 FPS. For a 1080p monitor, this is a fully playable setup, though the Ultra preset leaves no headroom for frame drops.

At 2560x1440, the playable settings are Low and Medium. Low averages 96.8 FPS and Medium averages 70.4 FPS, both comfortably above 60. High falls to 58.1 FPS, which is below the playable threshold, and Ultra is not viable at 43.1 FPS. For 1440p gaming, the user must stick to Medium or lower to maintain smooth frame rates.

At 3840x2160, only the Low preset is playable, averaging 64 FPS. The Medium preset at 46.8 FPS and High at 39.4 FPS are not smooth enough for a competitive FPS, and Ultra at 26.3 FPS is far too sluggish. The verdict is that 4K is only possible with significant visual compromises.

In summary, the system is a capable 1080p machine for this title, a decent 1440p machine on medium settings, and a marginal 4K machine on low settings. The 60 FPS playable threshold is met in three of the twelve tested configurations.

CPU and GPU Roles

The division of labor between the Ryzen 7 7800X3D and the GTX 1070 is evident in the scaling data. At 1080p, the CPU's strength allows the system to reach 130.9 FPS on Low, which indicates that the GPU is not saturated at lower resolutions. The drop from 130.9 FPS at Low to 60 FPS at Ultra is a 54% reduction, showing that the GPU becomes the limiting factor as shader and texture loads increase.

At 1440p, the same pattern holds but with a lower ceiling. The Low preset averages 96.8 FPS, which is still high, but the Ultra preset falls to 43.1 FPS. The GPU is doing more work per frame, and the gap between presets widens proportionally. The CPU still has headroom; the data does not show a scenario where the CPU causes a frame rate collapse.

At 4K, the GPU is clearly the dominant constraint. Even the Low preset only achieves 64 FPS, and the Ultra preset plummets to 26.3 FPS. The pixel throughput required at 3840x2160 overwhelms the GTX 1070's 256.3 GB/s memory bandwidth and 6.463 TFLOPS of FP32 compute. The CPU's 96 MB of L3 cache and high single-thread scores are irrelevant when the GPU cannot keep up.

The data suggests that the CPU matters most at 1080p with low settings, where the GPU is not the bottleneck. The GPU matters most at 4K and at high presets, where its limitations define the experience. At 1440p, the balance shifts toward the GPU as resolution increases, but the CPU still ensures that even the Low preset stays above 90 FPS.

Best Settings per Resolution

The optimal settings for each resolution are defined by the highest preset that maintains an average of at least 60 FPS.

At 1920x1080, the best setting is Ultra, which averages exactly 60 FPS. This is the maximum visual quality the system can handle while staying at the playable threshold. Users who prefer more headroom can drop to High (78.4 FPS) or Medium (93 FPS), but the data confirms that Ultra is technically playable.

At 2560x1440, the best setting is Medium, averaging 70.4 FPS. This provides a solid margin above the 60 FPS line while offering better visuals than Low (96.8 FPS). High falls short at 58.1 FPS, so Medium is the recommended ceiling for a balanced experience.

At 3840x2160, the best setting is Low, averaging 64 FPS. This is the only preset at 4K that clears the threshold. The margin is slim, so users should expect occasional dips below 60 FPS in busy scenes, but the average is acceptable. Medium at 46.8 FPS is not recommended for this resolution.

For a practical recommendation, the data points to 1080p Ultra as the sweet spot for this hardware, with 1440p Medium as a good alternative for users with a higher-resolution monitor. 4K should only be attempted on Low, and even then, the experience is marginal.