Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 45 | 56 | 65 | 93 |
| 1440p QHD | 67 | 90 | 102 | 144 |
| 1080p Full HD | 93 | 127 | 144 | 202 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
The AMD Ryzen 7 7700 and NVIDIA GeForce RTX 5060 combination delivers a robust 1080p and 1440p experience in Lockdown Protocol, with 4K remaining viable only at reduced settings. The data shows a clear performance hierarchy across the three tested resolutions, with the GPU acting as the primary bottleneck at higher pixel counts. Benchmark results indicate that the RTX 5060, paired with the 8-core Zen 4 processor, scales predictably as resolution decreases, providing a substantial frame rate cushion at 1440p and 1080p for high-refresh-rate displays.
Measured FPS Breakdown
At 3840x2160, the combo struggles to maintain high frame rates at the most demanding presets. The Ultra preset yields an average of 44.9 FPS, which falls below the 60 FPS playable threshold. High settings improve the situation to 56.3 FPS, still marginally short of playable. The Medium preset crosses the threshold with an average of 65.1 FPS, while Low settings produce a comfortable 93.2 FPS. The jump from Ultra to Medium represents a 20.2 FPS improvement, indicating that the RTX 5060's 8 GB GDDR7 memory and 128-bit bus are heavily taxed at 4K.
Moving to 2560x1440, the picture improves significantly. The Ultra preset averages 67 FPS, which clears the 60 FPS threshold with a small 7 FPS margin. High settings deliver 90.3 FPS, Medium hits 102 FPS, and Low reaches 144.1 FPS. The spread between Low and Ultra is 77.1 FPS, showing that the GPU has ample headroom at this resolution. The 1440p Ultra result is particularly notable, as it offers a 22.1 FPS advantage over the 4K High preset, demonstrating that the resolution reduction more than compensates for the increased graphical fidelity.
At 1920x1080, the combination is overwhelmingly capable. The Ultra preset averages 92.5 FPS, which is 32.5 FPS above the playable threshold. High settings reach 126.6 FPS, Medium hits 144.1 FPS, and Low peaks at 202.1 FPS. The 1080p results show that the CPU’s 16 threads and high single-thread performance (3dmark_single_thread score of 1049) are sufficient to feed the GPU at lower resolutions. The delta between 1080p Medium and Low is 58 FPS, suggesting that the RTX 5060 is the limiting factor even at 1080p, though the absolute numbers remain excellent for competitive play.
Similar Performance Alternatives
The CPU’s nearest rivals, based on average benchmark scores, include the AMD Ryzen AI 9 365, which scores 40048 against the Ryzen 7 7700’s 40081 — a mere 0.1% difference. The Intel Core 5 221E is 0.2% behind, while the AMD Ryzen 9 270 trails by 0.4%. The Intel Core i9-13905H rounds out the group at 0.6% lower performance. In practical terms, any of these processors would deliver nearly identical frame rates in Lockdown Protocol, as the game’s FPS data is primarily GPU-bound at 4K and 1440p.
On the GPU side, the RTX 5060’s nearest rivals are surprisingly close in aggregate score. The AMD Radeon 860M scores 26401, just 0.3% behind the RTX 5060’s 26421 average. The NVIDIA GeForce MX550 matches that 0.3% delta, while the AMD Radeon RX 5700 XT 50th Anniversary is 0.8% slower. The AMD Radeon RX 6750 XT is 1.2% faster, making it the only rival in the list that edges ahead. However, these deltas are within the margin of benchmark variance, meaning a user swapping between these GPUs would likely see single-digit FPS differences in Lockdown Protocol. The RTX 5060’s 72nd percentile ranking among all GPUs suggests it sits in the upper-midrange tier, and the measured FPS data confirms it is well-suited for 1440p gaming but not for 4K Ultra.
How This Combo Ranks
The Ryzen 7 7700 and RTX 5060 combination ranks 1815th out of 3714 tested combos in Lockdown Protocol, placing it in the 49th percentile of all configurations. This mid-pack ranking reflects the GPU’s position as the limiting factor; while the CPU is in the 87th percentile among all processors, the GPU’s 72nd percentile drags the overall combo down. The ranking implies that roughly half of tested systems perform better, likely due to faster GPUs such as higher-tier RTX 50-series cards or AMD equivalents. However, the rank is not a measure of absolute capability — the data shows the combo clears 60 FPS at 1080p and 1440p on all presets, which is the practical benchmark for playability. The 4K Ultra result of 44.9 FPS is the only configuration that falls significantly short, which is consistent with the GPU’s memory bandwidth of 448.0 GB/s being insufficient for that workload.
The Verdict
This PC can run Lockdown Protocol, but the playable envelope depends heavily on resolution. At 1920x1080, all four presets — Low, Medium, High, and Ultra — clear the 60 FPS threshold, with Ultra averaging 92.5 FPS. This resolution is fully playable at maximum settings. At 2560x1440, the same holds true: every preset averages above 60 FPS, with Ultra at 67 FPS and Low at 144.1 FPS. The 1440p Ultra result is playable, though the 7 FPS margin over the threshold is slim; users seeking consistent high frame rates might prefer High settings at 90.3 FPS. At 3840x2160, only Low and Medium presets are playable, delivering 93.2 FPS and 65.1 FPS respectively. High settings at 56.3 FPS and Ultra at 44.9 FPS fall short of the 60 FPS threshold. The verdict is clear: this is a 1080p and 1440p machine for Lockdown Protocol, with 4K reserved for medium fidelity at best.
FAQ
Q: Can the AMD Ryzen 7 7700 + RTX 5060 run Lockdown Protocol at 4K Ultra settings?
A: No. The measured average FPS at 3840x2160 Ultra is 44.9 FPS, which is 15.1 FPS below the 60 FPS playable threshold.
Q: What is the best preset for 2560x1440 that stays above 60 FPS?
A: The Ultra preset averages 67 FPS at 1440p, making it the highest quality setting that remains playable, though High settings provide a more comfortable 90.3 FPS.
Q: How does the RTX 5060 compare to its nearest rival, the AMD Radeon RX 6750 XT?
A: The RX 6750 XT has an average benchmark score of 26011, which is 1.2% lower than the RTX 5060’s 26421, meaning the RTX 5060 is slightly faster in aggregate.
Q: Is the RTX 5060’s 8 GB GDDR7 memory sufficient for 1080p gaming?
A: Yes, the measured data shows all 1080p presets exceed 92 FPS, with Ultra averaging 92.5 FPS and Low reaching 202.1 FPS, indicating no memory-related bottleneck at this resolution.
Q: What is the combo’s overall rank among tested configurations?
A: The combo ranks 1815th out of 3714 tested combos in Lockdown Protocol, placing it just below the median of the test pool.
Q: Does the Ryzen 7 7700 bottleneck the RTX 5060 at 1080p?
A: The data does not indicate a CPU bottleneck; the 1080p Low preset reaches 202.1 FPS, and the CPU’s single-thread benchmark score of 1049 suggests it can feed the GPU effectively at this resolution.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 92.5 FPS. This provides the full visual experience while maintaining a 32.5 FPS margin over the threshold.
At 2560x1440, the most demanding playable preset is Ultra, averaging 67 FPS. The margin is thinner at 7 FPS, so users prioritizing stability may opt for High at 90.3 FPS, but Ultra remains technically playable.
At 3840x2160, the most demanding playable preset is Medium, with an average of 65.1 FPS. The 5.1 FPS margin is modest, and Low settings at 93.2 FPS offer a safer alternative for consistent frame pacing. High and Ultra are not recommended, as they fall below the 60 FPS threshold.