Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 29 | 38 | 44 | 62 |
| 1440p QHD | 45 | 59 | 68 | 96 |
| 1080p Full HD | 61 | 81 | 93 | 131 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
The AMD Ryzen 7 5800X3D paired with the NVIDIA GeForce GTX 1070 delivers a playable experience in Lockdown Protocol, but only under specific conditions. At 1920x1080, the combination clears the 60 FPS threshold at every preset, making it a reliable 1080p setup. At 2560x1440, only Low and Medium settings maintain playability, while 4K requires dropping to Low to stay above 60 FPS. The data indicates that this older GPU, paired with a strong CPU, is most comfortable at 1080p and becomes progressively more limited as resolution increases.
Measured FPS Breakdown
The recorded measurements for Lockdown Protocol show a clear pattern of performance scaling across resolutions and presets. At 1920x1080, the combination produces its strongest results. With Low settings, the average frame rate reaches 131 FPS, which is the highest recorded value for this configuration. Medium settings deliver an average of 93 FPS, with a minimum of 79 FPS and a maximum of 107 FPS. High settings produce an average of 81 FPS. Ultra settings, the most demanding preset, still manage an average of 61 FPS, which is just above the playable threshold of 60 FPS. This means that at 1080p, every preset from Low to Ultra is playable, though Ultra sits very close to the boundary.
Moving to 2560x1440, the average frame rates drop noticeably. Low settings produce an average of 96 FPS, which remains well above the playable threshold. Medium settings yield an average of 68 FPS, with a minimum of 58 FPS and a maximum of 78 FPS. The minimum of 58 FPS indicates that while the average is playable, there can be brief dips below 60 FPS during demanding scenes. High settings drop to an average of 59 FPS, which is just under the 60 FPS threshold. Ultra settings fall further to an average of 45 FPS. At this resolution, the playable presets are Low and Medium, with High and Ultra falling short.
At 3840x2160, the performance ceiling is much lower. Low settings produce an average of 62 FPS, which is the only preset at 4K that clears the playable threshold. Medium settings average 44 FPS, with a minimum of 37 FPS and a maximum of 50 FPS. High settings average 38 FPS. Ultra settings average 29 FPS. The gap between Low and Medium at 4K is substantial, with a drop of 18 FPS, indicating that the GPU struggles significantly as settings increase at this resolution.
The frame rate data also shows how settings affect performance at each resolution. At 1080p, the difference between Low and Ultra is 70 FPS, which shows that the GPU has headroom at this resolution and can handle higher presets. At 1440p, the difference between Low and Ultra is 51 FPS, still a large gap but with lower absolute values. At 4K, the difference between Low and Ultra is 33 FPS, and the absolute values are much lower, meaning even Low settings barely reach playability.
Similar Performance Alternatives
The AMD Ryzen 7 5800X3D sits in a specific performance tier according to the database benchmarks. Its average benchmark score is 27896, and it ranks in the 80th percentile among all CPUs. The nearest rivals in performance are the AMD Ryzen 7 6800U with an average score of 27887 and a delta of 0 percent, meaning it performs essentially identically. The Intel Core i9-10900K scores 27872, which is 0.1 percent slower, a negligible difference. The AMD Ryzen AI 5 PRO 340 scores 27932, which is 0.1 percent faster. The Intel Core i5-12600KF scores 27799, which is 0.3 percent slower. These four processors are all within a fraction of a percent of the 5800X3D, so any of them would produce nearly identical CPU-bound behavior in Lockdown Protocol.
For the GPU, the NVIDIA GeForce GTX 1070 has an average benchmark score of 9780 and ranks in the 47th percentile among all GPUs. The nearest rivals are the AMD FirePro W5000 with an average score of 9803 and a delta of negative 0.2 percent, meaning it is slightly faster. The NVIDIA Quadro M2000M scores 9832, which is 0.5 percent faster. The NVIDIA Tesla M10 scores 9724, which is 0.6 percent slower. The NVIDIA Tesla C2070 scores 9716, which is 0.7 percent slower. These deltas are all under 1 percent, so a system using any of these GPUs would deliver very similar frame rates in Lockdown Protocol, provided the rest of the system is equivalent.
The practical implication is that this CPU and GPU pairing has close alternatives on both sides. Users with a Ryzen 7 6800U, Core i9-10900K, Ryzen AI 5 PRO 340, or Core i5-12600KF would see almost identical CPU performance. Users with a FirePro W5000, Quadro M2000M, Tesla M10, or Tesla C2070 would see almost identical GPU performance. The combination of any of these near-identical parts would yield frame rates within the same small margin as the measured results for the 5800X3D and GTX 1070.
CPU and GPU Roles
The benchmark results in Lockdown Protocol indicate that the GPU is the primary limiting factor for this combination, especially at higher resolutions. The CPU, AMD Ryzen 7 5800X3D, is a high-performing desktop processor with 8 cores and 16 threads, a boost clock of 4.50 GHz, and a large 96 MB shared L3 cache. Its benchmark scores are strong, including a Cinebench R23 multicore score of 14317 and a Geekbench multicore score of 11765. The GPU, NVIDIA GeForce GTX 1070, has 8 GB of GDDR5 memory and a boost clock of 1683 MHz, but it is an older Pascal architecture part with a 47th percentile ranking among all GPUs.
The scaling between resolutions confirms that the GPU is the bottleneck. When moving from 1080p to 1440p at High settings, the average frame rate drops from 81 FPS to 59 FPS, a reduction of 22 FPS. Moving from 1440p to 4K at High settings drops the average from 59 FPS to 38 FPS, a further reduction of 21 FPS. This consistent drop as resolution increases is characteristic of a GPU-limited scenario. The CPU is capable of feeding the GPU with data, but the GPU cannot render frames fast enough at higher pixel counts.
The settings scaling also points to GPU dominance. At 1080p, the difference between Low and Ultra is 70 FPS, while at 4K the difference between Low and Ultra is 33 FPS. On a CPU-limited system, the frame rate would be relatively flat across settings, but here the frame rate changes significantly with settings, which is a GPU-bound behavior. The CPU has enough headroom that even at Low settings, where the GPU workload is lightest, the frame rate reaches 131 FPS at 1080p. This indicates the CPU is not holding back performance at lower resolutions.
At 4K, the GPU is clearly the limiting component. Low settings average 62 FPS, but Medium drops to 44 FPS, High to 38 FPS, and Ultra to 29 FPS. The GPU simply cannot handle the increased shading and texture work at 4K. The CPU, with its high multithreaded performance, is not the constraint. The recorded data shows that the CPU would be capable of supporting higher frame rates if the GPU could render them, but the GTX 1070 reaches its limits at this resolution.
How This Combo Ranks
The combination of the AMD Ryzen 7 5800X3D and NVIDIA GeForce GTX 1070 ranks 3068 out of 3714 tested combinations in the database for Lockdown Protocol. This places it in the lower portion of the rankings, at roughly the 17th percentile of tested combos. The rank reflects the overall performance of the pairing, which is heavily influenced by the GPU's limitations.
This ranking makes sense given the hardware. The CPU ranks in the 80th percentile among all CPUs, meaning it is a strong processor. The GPU ranks in the 47th percentile among all GPUs, meaning it is near the middle of the distribution. However, in a game like Lockdown Protocol, the GPU's rendering performance is what drives frame rates at higher resolutions and settings. A mid-tier GPU combined with a top-tier CPU produces a system that is strong in CPU-bound scenarios but limited in GPU-bound scenarios.
The rank of 3068 out of 3714 means there are 646 tested combinations that perform worse than this pairing. It also means there are 3067 combinations that perform better. The position is not surprising for a GPU released in 2016 paired with a CPU released in 2022. The GPU is the older component and its age shows in demanding scenarios like 4K Ultra, where the frame rate drops to 29 FPS.
The Verdict
The question of whether this PC can run Lockdown Protocol has a clear answer based on the recorded data. At 1920x1080, the answer is yes, with all four presets clearing the 60 FPS playable threshold. Low averages 131 FPS, Medium averages 93 FPS, High averages 81 FPS, and Ultra averages 61 FPS. The best settings at 1080p are Ultra, with an average of 61 FPS. This is the most demanding preset, and it still achieves playability, though just barely.
At 2560x1440, the system can run the game at Low and Medium settings. Low averages 96 FPS and Medium averages 68 FPS. The best settings at 1440p are Medium, with an average of 68 FPS. High settings average 59 FPS, which is below the 60 FPS threshold, and Ultra averages 45 FPS. Users at this resolution should stick to Medium for a smooth experience.
At 3840x2160, the system can only run the game at Low settings. Low averages 62 FPS, which is just above the playable threshold. The best settings at 4K are Low, with an average of 62 FPS. Medium averages 44 FPS, High averages 38 FPS, and Ultra averages 29 FPS. None of these higher presets are playable at 4K.
The verdict is that this PC can run Lockdown Protocol, but the playable settings depend heavily on the resolution. At 1080p, it is fully capable. At 1440p, it is capable with reduced settings. At 4K, it is only capable at the lowest settings, and even then the margin above 60 FPS is thin. The playable threshold of 60 FPS is met at 1080p for all presets, at 1440p for Low and Medium, and at 4K only for Low.
FAQ
Q: Can this system run Lockdown Protocol at 1920x1080 with Ultra settings?
A: Yes. The average frame rate at 1080p Ultra is 61 FPS, which is above the 60 FPS playable threshold. Ultra is the best settings option at this resolution.
Q: What is the best playable setting at 2560x1440?
A: Medium is the best playable setting at 1440p, with an average of 68 FPS. Low also clears the threshold at 96 FPS, but Medium provides higher visual quality while remaining above 60 FPS on average.
Q: Is 4K playable with this hardware?
A: Only at Low settings, which average 62 FPS. Medium, High, and Ultra at 4K produce averages of 44 FPS, 38 FPS, and 29 FPS respectively, all below the 60 FPS threshold.
Q: How close are rival GPUs in performance to the GTX 1070?
A: The nearest rival, the AMD FirePro W5000, scores 9803, which is 0.2 percent faster than the GTX 1070's average benchmark score of 9780. Other rivals like the NVIDIA Quadro M2000M are 0.5 percent faster, while the NVIDIA Tesla M10 and Tesla C2070 are 0.6 and 0.7 percent slower.
Q: Does the CPU or GPU limit performance in this game?
A: The GPU is the limiting factor. Frame rates drop significantly as resolution increases, from 131 FPS at 1080p Low to 62 FPS at 4K Low, which indicates GPU-bound behavior. The CPU ranks in the 80th percentile among all CPUs and has sufficient headroom.
Q: What frame rates can be expected at 1440p High settings?
A: The average frame rate at 1440p High is 59 FPS, which is just below the 60 FPS playable threshold. This preset is not considered playable, though the average is very close to the boundary.