Lockdown Protocol

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 4060 combination delivers a strong 1080p and 1440p gaming experience in Lockdown Protocol, with 4K remaining viable at medium settings. Benchmark data shows this pairing ranks 2003rd out of 3714 tested combos for this title, placing it in the upper-middle tier of all possible configurations. The measured frame rates confirm that 60 FPS is achievable at every resolution tested, though the settings ceiling varies significantly from 4K Medium to 1080p Ultra.

Similar Performance Alternatives

The CPU and GPU in this combo each sit near specific performance peers according to aggregate benchmark scores. The AMD Ryzen 7 5700G posts an average benchmark score of 27051, which places it within 0.6% of several competing processors. The Intel Core i9-9900K scores 27097, a mere 0.2% higher, meaning users upgrading from that older flagship would see nearly identical CPU-bound performance in Lockdown Protocol. The AMD Ryzen AI 7 445 trails by 0.4% with a score of 26936, while the Intel Core i5-14400T leads the group at 27166, just 0.4% ahead. The Intel Core i7-1370P completes the immediate competitive set at 26900. These four rivals bracket the 5700G so tightly that no meaningful gameplay difference would emerge between them in this FPS title.

On the graphics side, the RTX 4060 achieves an average benchmark score of 17639, placing it in the 61st percentile of all GPUs. Its nearest rivals are unexpected: the AMD Radeon HD 7790 scores 17666, the AMD Radeon 780M integrated graphics scores 17588, the AMD Radeon Pro 560 scores 17551, and the AMD Radeon Pro 460 scores 17509. The delta percentages range from 0.2% to 0.7%, indicating these four GPUs deliver statistically indistinguishable average performance. The presence of integrated graphics like the Radeon 780M in this comparison underscores how close modern iGPUs have come to discrete cards in aggregate benchmarks, though the RTX 4060's dedicated ray tracing cores and 8 GB of GDDR6 memory provide advantages in modern FPS titles that aggregate scores may not fully capture.

For Lockdown Protocol specifically, the CPU's 79th percentile ranking versus all processors suggests the 5700G will not bottleneck the RTX 4060 in this title. The GPU's 61st percentile ranking indicates the graphics card is the more limiting factor, which aligns with the measured FPS data showing settings-dependent performance at each resolution.

FAQ

Q: Can this PC run Lockdown Protocol at 60 FPS on a 4K monitor?

A: Yes, but only at Low or Medium settings. At 3840x2160, the combo achieves 86.6 FPS on Low and 64.3 FPS on Medium, both clearing the 60 FPS threshold. High settings drop to 56.9 FPS and Ultra falls to 40.2 FPS, so those presets are not playable at 4K.

Q: What is the best settings preset for 1440p gaming with this hardware?

A: Ultra settings at 2560x1440 produce 63.7 FPS, which remains above the 60 FPS playable threshold. All four presets—Low at 137.8 FPS, Medium at 100.1 FPS, High at 86.7 FPS, and Ultra at 63.7 FPS—are playable, so users can choose their preferred visual quality without sacrificing smoothness.

Q: How does the RTX 4060 compare to its closest GPU rivals in aggregate performance?

A: The RTX 4060's average benchmark score of 17639 is nearly identical to the AMD Radeon HD 7790's 17666, a difference of only 0.2%. The AMD Radeon 780M scores 17588 (0.3% lower), the AMD Radeon Pro 560 scores 17551 (0.5% lower), and the AMD Radeon Pro 460 scores 17509 (0.7% lower). These differences are negligible in real-world gaming.

Q: Is the Ryzen 7 5700G a capable match for the RTX 4060 in this game?

A: The CPU's average benchmark score of 27051 places it in the 79th percentile of all processors, and its closest rivals—the Intel Core i9-9900K, AMD Ryzen AI 7 445, Intel Core i5-14400T, and Intel Core i7-1370P—all score within 0.6% of it. This indicates the 5700G provides sufficient processing power to keep up with the RTX 4060's output in Lockdown Protocol.

Q: What frame rate can I expect at 1080p with the highest visual settings?

A: At 1920x1080 with Ultra settings, the combo delivers 86.8 FPS on average. This is well above the 60 FPS threshold and represents the best visual quality available while maintaining comfortable headroom for demanding scenes.

Q: How does this combo rank against all other tested hardware combinations for Lockdown Protocol?

A: The Ryzen 7 5700G plus RTX 4060 ranks 2003rd out of 3714 tested combos, placing it in the 54th percentile. This means roughly 46% of tested configurations perform better, while 54% perform worse, positioning this as a solid mid-range pairing for this game.

How This Combo Ranks

The combination of AMD Ryzen 7 5700G and NVIDIA GeForce RTX 4060 ranks 2003rd out of 3714 tested hardware combinations for Lockdown Protocol. This places the pairing in the upper half of all tested systems, though not in the top tier. The rank reflects a balance between the CPU's 79th percentile standing and the GPU's 61st percentile standing, with the graphics card acting as the primary constraint on overall performance.

Systems ranked above this combo likely feature higher-end GPUs such as the RTX 4070 class or above, or CPUs with stronger multi-threaded performance. The 5700G's 8-core, 16-thread configuration with Zen 3 architecture provides solid baseline performance, but its PCIe Gen 3 interface and 16 MB of L3 cache place it below newer platforms in memory-intensive scenarios. The RTX 4060's 8 GB of GDDR6 memory on a 128-bit bus with 272.0 GB/s bandwidth is adequate for Lockdown Protocol at the tested resolutions, but the 15.11 TFLOPS FP32 compute and 24 RT cores limit how far settings can be pushed at 4K.

In practical terms, this rank means the combo sits squarely in the "high-end 1080p, capable 1440p, entry-level 4K" category. The measured FPS data confirms this positioning: 1080p Ultra runs at 86.8 FPS, 1440p Ultra runs at 63.7 FPS, and 4K Ultra runs at 40.2 FPS. The step-down from 1440p to 4K at Ultra settings represents a 36.8% performance drop, consistent with the GPU's memory bandwidth constraints at higher pixel counts.

The Verdict

This PC can run Lockdown Protocol above 60 FPS at all three tested resolutions, provided the correct settings are selected. At 1920x1080, every preset from Low to Ultra clears the threshold, with Ultra delivering 86.8 FPS. At 2560x1440, all presets also remain playable, with Ultra achieving 63.7 FPS. At 3840x2160, only Low and Medium presets are playable, with Medium reaching 64.3 FPS and High falling just short at 56.9 FPS.

The verdict by resolution is clear: 1080p users can enable Ultra settings without concern, 1440p users can enable Ultra but should be aware they have only 3.7 FPS of headroom above the threshold, and 4K users must restrict themselves to Medium or lower. The data shows no resolution produces frame rates below 40 FPS, meaning the combo never becomes unplayable, but 4K Ultra is clearly not a viable option.

For gamers prioritizing smoothness over visual fidelity, the 1440p Low setting at 137.8 FPS provides excellent responsiveness for competitive play. Those with 4K displays should accept Medium settings to stay above 60 FPS, sacrificing some visual detail for consistent performance.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings presets, with average frame rates recorded for each combination. No minimum or maximum frame rate data is available in the benchmark results.

At 3840x2160, the Ultra preset produces the lowest average of 40.2 FPS. High settings improve this to 56.9 FPS, still below the 60 FPS threshold. Medium settings reach 64.3 FPS, clearing the threshold by 4.3 FPS. Low settings deliver the best 4K result at 86.6 FPS, providing more than 40% headroom above the playable threshold.

At 2560x1440, performance improves substantially across all presets. Low settings achieve 137.8 FPS, Medium reaches 100.1 FPS, High hits 86.7 FPS, and Ultra manages 63.7 FPS. The gap between Low and Ultra is 74.1 FPS, representing a 53.8% performance drop when enabling maximum visual quality.

At 1920x1080, the combo demonstrates its strongest performance. Low settings produce 190.3 FPS, Medium reaches 134.5 FPS, High achieves 120.1 FPS, and Ultra delivers 86.8 FPS. Even at Ultra settings, the frame rate remains well above the 60 FPS threshold, with 26.8 FPS of headroom. The scaling from Low to Ultra shows a 103.5 FPS drop, indicating the GPU is the primary performance limiter at this resolution.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which delivers an average of 64.3 FPS. This provides 4.3 FPS of headroom above the threshold. High settings at 56.9 FPS fall short, making Medium the optimal choice for 4K users who want the best visual quality without dropping below 60 FPS.

At 2560x1440, Ultra settings are the best option, achieving 63.7 FPS average. This clears the 60 FPS threshold by 3.7 FPS, which is sufficient for most gameplay scenarios but leaves limited margin for demanding scenes. Users who prefer a larger safety buffer could select High settings at 86.7 FPS, sacrificing some visual fidelity for 23 more frames per second.

At 1920x1080, Ultra settings deliver 86.8 FPS, making it the clear best choice. This provides 26.8 FPS of headroom above the threshold, ensuring smooth gameplay even during intense firefights or complex visual effects. The combination of maximum visual quality and comfortable performance makes 1080p Ultra the definitive sweet spot for this hardware pairing.