Lockdown Protocol

The AMD Ryzen 7 5700 and NVIDIA GeForce RTX 3060 Ti combination delivers a highly capable Lockdown Protocol experience, but the playable settings ceiling varies sharply by resolution. At 1920x1080, this combo is a definitive success, clearing the 60 FPS threshold at every preset. At 2560x1440, it remains strong, though Ultra settings fall below the playable line. At 3840x2160, the system is constrained, with only Low settings providing a smooth experience. The data indicates a clear 1080p-focused machine that can stretch into 1440p with settings adjustments.

Measured FPS Breakdown

The measured performance data for this combo spans three resolutions and four settings presets, with average FPS figures recorded for each configuration. Minimum and maximum FPS values are not available in the dataset, so the analysis relies on average frame rates.

At 1920x1080, the results are uniformly strong. Low settings produce an average of 159.4 FPS, which is the highest figure recorded for this combo across any resolution or preset. Medium settings deliver 116.1 FPS, High settings follow at 101.4 FPS, and even the demanding Ultra preset maintains an average of 77.2 FPS. Every configuration at this resolution substantially exceeds the 60 FPS playable threshold, with the gap between Low and Ultra representing a 82.2 FPS spread.

Moving to 2560x1440, the performance drop is significant but not crippling. Low settings average 117 FPS, Medium settings drop to 82.1 FPS, and High settings hold at 69.3 FPS. The Ultra preset falls to 53.1 FPS, which sits below the 60 FPS threshold. The scaling from 1080p to 1440p shows a consistent reduction: Low loses 42.4 FPS, Medium loses 34 FPS, High loses 32.1 FPS, and Ultra loses 24.1 FPS. Notably, the percentage drop is steepest at Low settings (73.4% of the 1080p value) and least severe at Ultra (68.8% of the 1080p value).

At 3840x2160, the system struggles to maintain playability outside of Low settings. Low averages 75.6 FPS, which is the only 4K preset above the 60 FPS line. Medium drops to 51.3 FPS, High falls to 50.1 FPS, and Ultra bottoms out at 38.2 FPS. The scaling from 1440p to 4K is dramatic: Low loses 41.4 FPS, Medium loses 30.8 FPS, High loses 19.2 FPS, and Ultra loses 14.9 FPS. The relatively smaller absolute drops at High and Ultra suggest the GPU is already heavily loaded at 1440p with these presets, leaving less headroom to lose.

The pattern across all resolutions shows that the gap between Low and Ultra settings widens as resolution decreases. At 1080p, the delta is 82.2 FPS; at 1440p, it is 63.9 FPS; at 4K, it narrows to 37.4 FPS. This indicates that at lower resolutions, the CPU and GPU have enough headroom for settings to dramatically influence frame rates, while at 4K, the GPU is the limiting factor regardless of preset.

CPU and GPU Roles

The benchmark data reveals how the balance of CPU and GPU workload shifts across resolutions and presets for Lockdown Protocol. At 1920x1080, the wide spread between Low (159.4 FPS) and Ultra (77.2 FPS) suggests the GPU is not the primary bottleneck at lower settings, allowing high frame rates. The CPU, an 8-core Zen 3 part with 16 threads, provides enough throughput to feed the RTX 3060 Ti efficiently at this resolution.

As resolution increases to 2560x1440, the GPU begins to assert dominance. The fact that Low settings still achieve 117 FPS while Ultra drops to 53.1 FPS indicates that the GPU's rendering workload is scaling significantly with preset complexity. The CPU is likely still keeping pace, but the GPU is now the limiting factor at higher presets. The 32.1 FPS drop from High (69.3) to Ultra (53.1) at 1440p is a clear sign that the GPU struggles with the most demanding settings at this resolution.

At 3840x2160, the GPU is unambiguously the bottleneck. The difference between Low (75.6 FPS) and Medium (51.3 FPS) is 24.3 FPS, and High (50.1) and Ultra (38.2) both sit well below the playable threshold. The CPU, with its 16 MB of L3 cache and dual-channel DDR4 memory support, is unlikely to be the constraint at 4K; the pixel throughput required by 3840x2160 overwhelms the RTX 3060 Ti's 16.20 TFLOPS of FP32 compute in all but the lightest settings.

The resolution scaling data reinforces this interpretation. From 1080p to 1440p, the average FPS across all presets drops by roughly 35%, while from 1440p to 4K, it drops by another 40% (calculated from the provided figures). This non-linear degradation is characteristic of GPU-bound scenarios, where the pixel count increase (from 2.07 million pixels at 1080p to 3.69 million at 1440p to 8.29 million at 4K) outpaces the GPU's ability to maintain frame rates. The CPU's role is most relevant at 1080p Low, where 159.4 FPS demands strong per-core performance; the Ryzen 7 5700's single-thread score of 901 in 3dmark_single_thread and 2916 in Cinebench R23 suggest it handles this adequately.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 7 5700 sits among comparable processors that would yield similar frame rates in Lockdown Protocol. The nearest rivals, based on average benchmark scores, include the Intel Xeon D-2752TER, which scores 25530 (0.1% faster), and the AMD Ryzen 5 7640U, scoring 25485 (0.1% slower). The AMD Ryzen 5 6600H scores 25550 (0.1% faster), and the AMD Ryzen 7 5825U scores 25446 (0.3% slower). These delta values are minimal, meaning any of these CPUs would produce nearly identical CPU-bound performance in this game. The Ryzen 7 5700's passmark multithread score of 24303 and Cinebench R23 multicore score of 20655 fall within the same performance band as these rivals.

On the GPU side, the NVIDIA GeForce RTX 3060 Ti's nearest rivals are equally close. The AMD Radeon RX 9060 scores 16014 (0.7% slower), the AMD Radeon Pro 5600M scores 16351 (1.4% faster), and the AMD Radeon RX 5700 XT scores 16361 (1.4% faster). The AMD Radeon R9 370X scores 15862 (1.7% slower). For Lockdown Protocol, swapping the RTX 3060 Ti for any of these would shift average FPS by less than 2% at every resolution and preset. Gamers with an RX 5700 XT, for instance, would see nearly identical performance at 1080p Ultra (77.2 FPS for the RTX 3060 Ti, roughly 76-78 FPS for the RX 5700 XT). The practical takeaway is that this combo's performance profile is representative of a broad cluster of mid-range to upper-mid-range hardware from the same era.

The Verdict

Can this PC run Lockdown Protocol? Yes, with qualifications. The verdict by resolution is clear and data-driven.

At 1920x1080, the system clears 60 FPS at every preset. Low averages 159.4 FPS, Medium 116.1 FPS, High 101.4 FPS, and Ultra 77.2 FPS. The best settings for maximum visual quality while maintaining playability are Ultra, which still delivers 17.2 FPS above the 60 FPS threshold. This is a fully playable configuration at all settings.

At 2560x1440, the system is partially playable. Low (117 FPS), Medium (82.1 FPS), and High (69.3 FPS) all exceed the 60 FPS line. High settings represent the best visual quality that maintains playability, with 9.3 FPS of headroom. Ultra falls to 53.1 FPS, which is 6.9 FPS short of the threshold. The recommendation is to stick with High settings for a 1440p experience.

At 3840x2160, only Low settings are playable, averaging 75.6 FPS. Medium (51.3 FPS), High (50.1 FPS), and Ultra (38.2 FPS) all fail to reach 60 FPS. The gap is substantial: High misses by 9.9 FPS, and Ultra misses by 21.8 FPS. For 4K gaming, the system requires the Low preset to avoid stutter and maintain fluidity.

The overall assessment is that this combo is a 1080p champion, a 1440p workhorse with settings compromises, and a 4K machine only at the lowest settings. The 8 GB GDDR6 memory on the GPU and the 65 W TDP CPU suggest a system designed for mainstream gaming, and the data confirms that expectation.

FAQ

Q: Can this PC run Lockdown Protocol at 1080p with max settings?

A: Yes. At 1920x1080 with Ultra settings, the combo averages 77.2 FPS, which is 17.2 FPS above the 60 FPS playable threshold.

Q: What is the best setting for 1440p gaming?

A: High settings at 2560x1440 deliver 69.3 FPS, which is the highest preset that remains playable. Ultra drops to 53.1 FPS, below the threshold.

Q: Is 4K gaming possible with this hardware?

A: Only at Low settings, which average 75.6 FPS at 3840x2160. Medium (51.3), High (50.1), and Ultra (38.2) all fail to reach 60 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 7 5700 scores 25517 on average, with rivals like the Intel Xeon D-2752TER (25530) and AMD Ryzen 5 7640U (25485) within 0.3% of its performance. No meaningful difference in game.

Q: Does the GPU have close alternatives?

A: The RTX 3060 Ti's nearest rivals include the AMD Radeon RX 5700 XT (1.4% faster) and RX 9060 (0.7% slower), so swapping to these would yield nearly identical FPS.

Q: What is the playable threshold used in this analysis?

A: The playable threshold is 60 FPS. Settings that average above this are considered playable; those below are not.

How This Combo Ranks

In the database of tested combinations for Lockdown Protocol, this specific combo ranks 2532 out of 3714 tested configurations. This places it in the 32nd percentile of all combos, meaning roughly 68% of tested systems perform better. The rank reflects a mid-tier position, consistent with the CPU's 78th percentile among all CPUs and the GPU's 59th percentile among all GPUs.

The rank suggests that while this system is far from top-tier, it is not a low-end configuration either. The 1080p results (77.2 FPS at Ultra) are competitive with many systems, but the 4K performance (38.2 FPS at Ultra) pulls the overall rank down. The combo's position at 2532 of 3714 indicates that most higher-ranked systems likely feature more powerful GPUs or newer architectures, given that the CPU's percentile is relatively strong. The data shows a system that excels in its intended resolution class (1080p) but falls behind when pushed to higher resolutions. For a 1080p gamer, this rank understates the experience; for a 4K enthusiast, it accurately reflects the hardware's limitations.