Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing but may impact FPS.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 25 | 33 | 38 | 53 |
| 1440p QHD | 38 | 51 | 59 | 82 |
| 1080p Full HD | 52 | 70 | 80 | 112 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3050 4 GB pairing is a study in contrasts: the CPU is a modern 6-core Zen 4 part that ranks in the 77th percentile among all processors, while the GPU is an entry-level Ampere card sitting at the 50th percentile. In Lockdown Protocol, this combination delivers playable frame rates at 1080p and 1440p, but the 4 GB VRAM and modest shader count cap the experience at 4K. The data shows a system that punches above its weight at lower resolutions but falls short of the 60 FPS threshold once the resolution climbs to 3840x2160.
Similar Performance Alternatives
The Ryzen 5 8400F sits in a tightly packed cluster of CPUs. Its average benchmark score of 25005 places it within 0.4% of several rivals. The AMD Ryzen 5 7500F is the closest match, with an average score of 24964 and a delta of just 0.2% — effectively identical performance in synthetic workloads. The Intel Core i7-11850H trails by 0.3% (24935), while the Intel Core i7-13620H is 0.4% behind at 24911. On the other side, the AMD EPYC 9474F is 0.4% ahead with 25103. For Lockdown Protocol, swapping the 8400F for any of these would yield near-identical CPU-bound behavior; none of these alternatives would meaningfully change frame rates in this game.
The RTX 3050 4 GB has no listed nearest rivals in the fact pack, and its average benchmark score is listed as zero, meaning direct GPU comparisons are unavailable. However, the data indicates the GPU sits at the 50th percentile among all GPUs, placing it squarely in the mid-low tier. In practice, this means the 4 GB VRAM capacity and 192.0 GB/s memory bandwidth are the limiting factors at higher resolutions, not raw compute. The card's 7.127 TFLOPS FP32 throughput is adequate for 1080p gaming, but the 128-bit memory bus becomes a bottleneck when pixel counts rise.
CPU and GPU Roles
At 1080p, the CPU's strength is evident. The Ryzen 5 8400F's single-thread score of 3685 in Passmark and multi-thread score of 24389 provide ample headroom for the game's logic. Frame rates scale from 112 FPS at Low to 70 FPS at High, a drop of 42 FPS that reflects GPU load increasing as settings rise. The GPU becomes the primary constraint at High and above, but the CPU never holds back the system — even at Ultra, the 52 FPS average is limited by the RTX 3050, not the processor.
At 1440p, the GPU's role dominates. The average FPS falls from 82 at Low to 51 at High, a 31 FPS difference. The Medium preset produces 59 FPS, just one frame shy of the 60 FPS target. This scaling shows the GPU struggling to maintain throughput as pixel count increases by roughly 78% compared to 1080p. The CPU's contribution fades into the background; the 8400F's 16 MB of shared L3 cache and 83.2 GB/s memory bandwidth are more than sufficient for the data demands at this resolution.
At 4K, the GPU is the sole bottleneck. The RTX 3050 4 GB manages only 53 FPS at Low, dropping to 33 FPS at High and 25 FPS at Ultra. The 4 GB VRAM is insufficient for high-resolution textures, and the 192.0 GB/s bandwidth cannot feed the render pipeline fast enough. The CPU's 6 cores and 12 threads are effectively idle relative to the GPU's workload; upgrading the CPU would not improve these numbers, but upgrading the GPU would.
How This Combo Ranks
This specific CPU-GPU combination ranks 3269 out of 3714 tested combos in Lockdown Protocol, placing it in the bottom 12% of all pairings. The rank reflects the GPU's limitations more than the CPU's capabilities. The 8400F alone commands a 77th percentile position, but the RTX 3050 4 GB's 50th percentile standing drags the overall ranking down. In practical terms, this combo outperforms roughly 445 other tested configurations, but it sits below the median for the database.
The data suggests the combination is poorly balanced for this game. The CPU has headroom to drive a significantly more powerful GPU, while the GPU's 4 GB memory and 2048 shading units cap performance well below what the processor can deliver. At 1080p, the system achieves playable frame rates, but the ranking indicates that most other tested combos — likely those with similar GPUs and weaker CPUs, or stronger GPUs with similar CPUs — perform better.
The Verdict
This PC can run Lockdown Protocol, but the playable resolutions are limited. At 1920x1080, the system clears the 60 FPS threshold on High, Low, and Medium presets, with High being the best setting at 70 FPS average. At 2560x1440, only the Low preset is playable, delivering 82 FPS average. At 3840x2160, no preset reaches 60 FPS — the highest average is 53 FPS at Low, which falls below the playable threshold.
The verdict by resolution confirms this: 1080p supports High (70 FPS), Low (112 FPS), and Medium (80 FPS) as playable; 1440p supports only Low (82 FPS); 4K supports none. For competitive play at 60 FPS, stick to 1080p with High settings or 1440p with Low settings. The 4K resolution is not viable for this game with this hardware, regardless of preset.
FAQ
Q: Can this system run Lockdown Protocol at 1080p with High settings?
A: Yes. The measured average FPS at 1920x1080 with High settings is 70 FPS, which exceeds the 60 FPS playable threshold.
Q: What is the best playable setting at 1440p?
A: The Low preset is the only playable option at 2560x1440, delivering an average of 82 FPS. The Medium preset averages 59 FPS, just below the threshold, and High averages 51 FPS.
Q: Is 4K gaming possible with this combo?
A: No. At 3840x2160, the best average FPS is 53 at Low settings, which is below the 60 FPS playable threshold. Medium, High, and Ultra all fall further behind at 38, 33, and 25 FPS respectively.
Q: How does the Ryzen 5 8400F compare to its closest rivals?
A: The 8400F's average benchmark score is 25005, which is 0.2% higher than the Ryzen 5 7500F (24964), 0.3% higher than the Core i7-11850H (24935), and 0.4% higher than the Core i7-13620H (24911). The EPYC 9474F is 0.4% ahead at 25103.
Q: What limits performance at higher resolutions?
A: The RTX 3050 4 GB's 4 GB VRAM and 192.0 GB/s memory bandwidth are the primary constraints. At 1440p and 4K, frame rates drop sharply as settings increase, indicating the GPU cannot sustain the required memory throughput.
Q: What is the best overall preset for this system?
A: At 1080p, the High preset at 70 FPS offers the best balance of visual quality and performance. At 1440p, only Low (82 FPS) meets the 60 FPS threshold.
Best Settings per Resolution
At 1920x1080, the High preset is the most demanding option that stays at or above 60 FPS, averaging 70 FPS. The Medium preset averages 80 FPS and Low averages 112 FPS, but High provides the best visual fidelity within the playable range. The Ultra preset falls short at 52 FPS, so it is not recommended.
At 2560x1440, the Low preset is the only playable option, averaging 82 FPS. The Medium preset comes close at 59 FPS but misses the threshold by one frame, making it unsuitable for consistent 60 FPS gameplay. High (51 FPS) and Ultra (38 FPS) are not viable.
At 3840x2160, no preset reaches 60 FPS. The Low preset averages 53 FPS, Medium 38 FPS, High 33 FPS, and Ultra 25 FPS. Users targeting 4K must accept frame rates below the playable threshold or lower the resolution.