Lockdown Protocol

The AMD Ryzen 5 7600X paired with the NVIDIA GeForce RTX 5060 delivers a broad range of frame rates in Lockdown Protocol, scaling from a strong 201.5 FPS average at 1920x1080 on Low settings down to 42.5 FPS at 3840x2160 on Ultra. The measured data, collected across three resolutions and four quality presets, shows a system that comfortably handles 1080p and 1440p gaming while struggling at 4K with maximum settings. This analysis walks through the exact frame rate figures, identifies the best settings for each resolution, examines CPU versus GPU influence, answers common questions, and compares the combo to nearby hardware alternatives.

Measured FPS Breakdown

At 1920x1080, the Ryzen 5 7600X and RTX 5060 combination produces its highest frame rates. On Low settings, the average FPS reaches 201.5, which is the single fastest result in the entire measured dataset. Moving to Medium settings drops the average to 139.5 FPS, a reduction of 62 FPS from Low. High settings yield 121.3 FPS average, while Ultra settings bring the average down to 92.4 FPS. The gap between Low and Ultra at 1080p is 109.1 FPS, indicating that the preset choice has a substantial impact on performance even at this resolution. All four presets at 1080p stay well above the 60 FPS playable threshold, with the lowest average being 92.4 FPS on Ultra.

At 2560x1440, the frame rates remain strong but show a clear step down from 1080p. Low settings deliver an average of 144.7 FPS, which is 56.8 FPS lower than the 1080p Low result. Medium settings produce 101.6 FPS average, while High settings reach 89.1 FPS. Ultra settings at 1440p average 65.9 FPS, which is the closest any preset at this resolution comes to the 60 FPS threshold. The scaling from Low to Ultra at 1440p spans 78.8 FPS, from 144.7 down to 65.9. Every preset at 1440p still clears 60 FPS, though Ultra has only a 5.9 FPS margin above the playable threshold.

At 3840x2160, the performance picture changes dramatically. Low settings average 96.7 FPS, which remains comfortably playable. Medium settings drop to 70.1 FPS average, still above 60 FPS but with a narrower margin of 10.1 FPS. High settings fall to 56.9 FPS average, dipping below the 60 FPS threshold by 3.1 FPS. Ultra settings produce the lowest result in the dataset at 42.5 FPS average, which is 17.5 FPS below the playable threshold. The spread from Low to Ultra at 4K is 54.2 FPS, and notably, only the two lower presets (Low and Medium) maintain averages at or above 60 FPS.

The data shows no min or max FPS values recorded for any resolution or preset, so the analysis relies entirely on average frame rates. The pattern across all three resolutions is consistent: each step up in settings reduces the average FPS, but the magnitude of that reduction varies. At 1080p, the step from Low to Medium costs 62 FPS, while at 4K the same step costs 26.6 FPS. This suggests that at higher resolutions, the GPU becomes the limiting factor, compressing the relative differences between presets.

Best Settings per Resolution

For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 92.4 FPS. This is the best visual quality available at this resolution while maintaining a comfortable margin above the playable threshold. The Ultra preset at 1080p is 32.4 FPS above the 60 FPS minimum, meaning there is headroom for demanding scenes even if they cause occasional frame drops.

At 2560x1440, the best settings are also Ultra, with an average of 65.9 FPS. This preset clears 60 FPS by 5.9 FPS, which is a much tighter margin than at 1080p. Ultra at 1440p represents the highest visual fidelity that remains playable, but the narrow buffer means that heavy combat or complex environments could potentially push the frame rate below 60 FPS in practice. High settings at 1440p average 89.1 FPS, which would be a safer choice for consistent performance, but Ultra is technically the best settings that still meets the threshold.

For 3840x2160, the best settings are Medium, with an average of 70.1 FPS. This is the only resolution where the best playable preset is not Ultra. Medium at 4K clears 60 FPS by 10.1 FPS, providing a reasonable buffer. Low settings at 4K average 96.7 FPS, which would offer smoother performance, but Medium provides better visual quality while still staying above the threshold. High settings at 4K average 56.9 FPS, which fails to meet the 60 FPS requirement, and Ultra at 4K averages 42.5 FPS, well below playable.

The verdictByResolution data confirms these findings: 1920x1080 lists Ultra as the best settings with 92.4 FPS, 2560x1440 lists Ultra with 65.9 FPS, and 3840x2160 lists Medium with 70.1 FPS. Across all resolutions, the system can run the game at playable frame rates, but only if the user selects appropriate settings for each resolution.

CPU and GPU Roles

The scaling between resolutions and presets reveals which component matters more for Lockdown Protocol at each resolution. At 1920x1080, the frame rates are highest across all presets, suggesting that the GPU has ample headroom and the CPU is not the primary bottleneck. The difference between Low (201.5 FPS) and Ultra (92.4 FPS) at 1080p is 109.1 FPS, indicating that the GPU workload scales significantly with settings. However, the fact that Low settings exceed 200 FPS suggests the CPU can feed frames at a very high rate, and the GPU is the limiting factor as settings increase.

At 2560x1440, the frame rates drop across all presets compared to 1080p. Low settings fall from 201.5 to 144.7 FPS, a 28.2% reduction. This drop indicates that the GPU is becoming more stressed at higher resolution, even at Low settings. The gap between Low and Ultra at 1440p is 78.8 FPS, smaller than the 109.1 FPS gap at 1080p. This compression suggests that as resolution increases, the GPU workload grows, and the CPU becomes relatively less important. The CPU still plays a role, but the GPU is clearly the dominant factor at 1440p.

At 3840x2160, the GPU is definitively the bottleneck. Low settings average 96.7 FPS, which is a 47.8% drop from 1080p Low. The gap between Low and Ultra at 4K is 54.2 FPS, even smaller than at 1440p. This pattern shows that at 4K, the GPU is saturated, and the CPU has minimal influence on frame rates. The fact that Ultra at 4K produces only 42.5 FPS, while the same CPU with lower GPU load at 1080p produces 92.4 FPS, confirms that the RTX 5060 is the limiting component at higher resolutions.

The Ryzen 5 7600X has a single-thread benchmark score of 1060 in 3dmark and a passmark single-thread score of 4135, which are strong results. The CPU's multi-thread performance, with a cinebench r23 multicore score of 15236, also indicates it can handle game logic and physics without becoming a bottleneck. However, the measured FPS data shows that the CPU's influence diminishes as resolution increases. At 1080p, the CPU can push the GPU to 201.5 FPS on Low settings, but at 4K, the GPU cannot exceed 96.7 FPS even on Low settings. This indicates that for Lockdown Protocol, the RTX 5060 is the primary performance driver at 1440p and 4K, while the CPU matters more at 1080p where GPU load is lighter.

FAQ

Q: Can this system run Lockdown Protocol at 60 FPS on Ultra settings at 1920x1080?

A: Yes. The measured average FPS at 1920x1080 on Ultra is 92.4, which is 32.4 FPS above the 60 FPS playable threshold. This is the best settings preset at this resolution.

Q: What is the highest playable setting at 3840x2160?

A: Medium is the best settings at 4K, with an average FPS of 70.1. High settings at 4K average 56.9 FPS, which falls below the 60 FPS threshold, and Ultra averages 42.5 FPS.

Q: How much faster is Low settings compared to Ultra at 2560x1440?

A: Low settings at 1440p average 144.7 FPS, while Ultra averages 65.9 FPS. This is a difference of 78.8 FPS, with Low being roughly 2.2 times faster than Ultra.

Q: Does the CPU or GPU limit performance at 1920x1080?

A: At 1080p, the CPU becomes relatively more important because the GPU has headroom, as shown by Low settings reaching 201.5 FPS. As settings increase to Ultra, the GPU workload grows, and the GPU becomes the limiting factor.

Q: Is the 60 FPS threshold met at all resolutions?

A: No. At 3840x2160, High and Ultra presets fail to meet the threshold, with averages of 56.9 and 42.5 FPS respectively. At 1920x1080 and 2560x1440, all presets meet or exceed 60 FPS.

Q: What is the frame rate at 1920x1080 on Medium settings?

A: The average FPS at 1080p on Medium is 139.5. This is above the 60 FPS threshold and represents a middle ground between Low (201.5) and High (121.3).

Similar Performance Alternatives

Looking at the nearestRivals for the CPU, the AMD Ryzen 5 7600X has an average benchmark score of 27636, placing it in the 79th percentile of all CPUs. The closest rival is the AMD Ryzen 7 5800, with an average score of 27535 and a deltaPct of 0.4, meaning the Ryzen 5 7600X is 0.4% faster. The AMD Ryzen 7 5700X and Intel Core i5-12600K both have average scores of 27578, with a deltaPct of 0.2, indicating the 7600X is 0.2% faster than each. The AMD Ryzen 5 8500GE has an average score of 27712 and a deltaPct of -0.3, meaning it is 0.3% faster than the 7600X. These rivals would behave nearly identically in Lockdown Protocol, with performance differences under half a percent. Users with any of these CPUs should expect similar frame rates when paired with the same GPU.

For the GPU, the NVIDIA GeForce RTX 5060 has an average benchmark score of 26331, placing it in the 72nd percentile of all GPUs. The nearest rival is the AMD Radeon RX 6750 XT, with an average score of 26011 and a deltaPct of 1.2, meaning the RTX 5060 is 1.2% faster. The AMD Radeon 860M has an average score of 26401 with a deltaPct of -0.3, making it 0.3% faster than the RTX 5060. The NVIDIA GeForce MX550 also has a score of 26421 with a deltaPct of -0.3, again 0.3% faster. The AMD Radeon RX 5700 XT 50th Anniversary has an average score of 26553 and a deltaPct of -0.8, meaning it is 0.8% faster. These GPU rivals are all within 1.2% of the RTX 5060 in average benchmark scores. In Lockdown Protocol, the frame rates would be very similar, with the RX 6750 XT potentially delivering slightly lower FPS and the RX 5700 XT 50th Anniversary slightly higher FPS, but all within a few frames of each other.

The practical implication is that swapping the Ryzen 5 7600X for any of its nearest rivals would not meaningfully change the measured FPS in Lockdown Protocol. Likewise, swapping the RTX 5060 for the RX 6750 XT or RX 5700 XT 50th Anniversary would produce nearly identical performance. The combo rank of 1821 out of 3714 tested combos places this system in the middle of the pack, and these rival components would likely land in a similar range.

The Verdict

This PC can run Lockdown Protocol, but the answer depends heavily on resolution and settings. At 1920x1080, the system runs all presets above 60 FPS, with Ultra averaging 92.4 FPS. This makes 1080p the optimal resolution for this combo, offering the best visual quality while maintaining a comfortable frame rate margin. At 2560x1440, the system also runs all presets above 60 FPS, with Ultra averaging 65.9 FPS. This is playable, though the margin is thinner, and users who prioritize consistent frame rates might prefer High settings at 89.1 FPS.

At 3840x2160, the system can only run Low and Medium presets above 60 FPS. Medium averages 70.1 FPS, which is the best playable setting at 4K. High settings at 4K average 56.9 FPS, just below the threshold, and Ultra at 42.5 FPS is not playable. For users with a 4K display, the recommendation is to stick with Medium settings to stay above 60 FPS.

The verdictByResolution data confirms these conclusions. For 1920x1080, the best settings are Ultra with 92.4 FPS. For 2560x1440, the best settings are Ultra with 65.9 FPS. For 3840x2160, the best settings are Medium with 70.1 FPS. The system meets the 60 FPS playable threshold in all three resolutions, but only with appropriate settings choices. At 4K, the user must sacrifice visual quality to maintain performance.

How This Combo Ranks

The AMD Ryzen 5 7600X and NVIDIA GeForce RTX 5060 combination ranks 1821 out of 3714 tested combos in Lockdown Protocol. This places it in the 49th percentile of all tested combinations, meaning roughly half of the tested systems perform better and half perform worse. The rank reflects the system's ability to run the game across various resolutions and settings, with the measured FPS showing strong performance at 1080p and 1440p but weaker results at 4K on high presets.

The CPU's percentileVsAllCpus of 79 indicates the Ryzen 5 7600X is in the top 21% of all CPUs, and the GPU's percentileVsAllGpus of 72 places the RTX 5060 in the top 28% of all GPUs. However, the combo rank of 1821 out of 3714 is lower than either individual component's percentile, suggesting that the pairing is not optimal for Lockdown Protocol specifically. The GPU, with its 8 GB of memory and 448.0 GB/s bandwidth, appears to be the limiting factor at higher resolutions, while the CPU's strong single-thread performance (1060 in 3dmark single-thread) helps at 1080p.

Compared to the nearest rivals, this combo sits in a crowded field. The CPU rivals are all within 0.4% of the 7600X's average benchmark score, and the GPU rivals are all within 1.2% of the RTX 5060's score. This means that many other combinations of similar hardware would produce nearly identical frame rates in Lockdown Protocol. The rank of 1821 out of 3714 reflects a mid-tier result, with the system offering solid 1080p and 1440p performance but requiring settings compromises at 4K. For users targeting 1080p or 1440p gaming, this combo is well-positioned; for 4K enthusiasts, it falls short of maximum settings.