Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 48 | 56 | 78 |
| 1440p QHD | 56 | 75 | 81 | 115 |
| 1080p Full HD | 74 | 97 | 116 | 161 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
The AMD Ryzen 5 7600X paired with the NVIDIA GeForce RTX 3060 Ti delivers a competent 1080p and 1440p experience in Lockdown Protocol, but the data shows a sharp drop-off at 4K where only the lowest settings remain viable. This analysis breaks down the measured performance across three resolutions and four quality presets, interpreting what the frame rate data implies about the hardware combination's strengths and limitations.
Best Settings per Resolution
At 1920x1080, the combination clears the 60 FPS threshold at every preset tested. The most demanding setting that stays at or above 60 FPS is Ultra, which produces an average of 74.1 FPS. This is a comfortable margin above the 60 FPS playable threshold, leaving headroom for dips in intense combat sequences. The data shows High settings deliver 97.2 FPS, Medium reaches 115.5 FPS, and Low peaks at 161.3 FPS, indicating the CPU-GPU pairing scales well at this resolution without bottlenecking.
Moving to 2560x1440, the best playable preset is High, averaging 75 FPS. This is notably lower than the 1080p High result of 97.2 FPS, a 22.2 FPS drop that reflects the increased pixel load. Medium settings at 1440p produce 81.3 FPS, while Low reaches 114.7 FPS. Ultra at this resolution falls to 56.1 FPS, just below the 60 FPS threshold, making it unplayable by the strict standard used here. The 1440p data suggests the RTX 3060 Ti's 8 GB memory buffer and 256-bit bus handle the resolution well, but Ultra effects push the rendering pipeline past its comfort zone.
At 3840x2160, the situation changes dramatically. The only preset that clears 60 FPS is Low, averaging 77.6 FPS. Medium drops to 55.6 FPS, High falls to 48 FPS, and Ultra bottoms out at 34.8 FPS. The 4K results reveal a hard ceiling: the GPU cannot sustain playable frame rates at anything above minimal settings. This is consistent with the GPU's 59th percentile ranking among all GPUs, indicating it is a mid-range part that struggles with 4K rendering loads.
CPU and GPU Roles
The data reveals a clear division of labor between the Ryzen 5 7600X and the RTX 3060 Ti across resolutions. At 1080p, the CPU's influence is more apparent because the GPU has spare capacity. The jump from Low (161.3 FPS) to Ultra (74.1 FPS) represents a 54.1% reduction in frame rate, but the absolute numbers are high enough that the Ryzen 5 7600X's single-thread performance (3dmark_single_thread score of 1060) keeps feeding frames without becoming a limiting factor. The CPU's 79th percentile ranking among all CPUs supports this interpretation.
At 1440p, the GPU begins to assert dominance. The scaling from 1080p to 1440p at High settings shows a 22.2 FPS drop (97.2 to 75), which is a 22.8% reduction. This is roughly proportional to the increase in pixel count (77.8% more pixels), but the fact that Ultra at 1440p (56.1 FPS) falls below the 60 FPS threshold while 1080p Ultra (74.1 FPS) clears it suggests the GPU's compute resources are the binding constraint. The RTX 3060 Ti's 16.20 TFLOPS FP32 throughput and 448.0 GB/s memory bandwidth are adequate for 1080p Ultra but insufficient for 1440p Ultra.
The 4K results are almost entirely GPU-bound. The gap between Low (77.6 FPS) and Medium (55.6 FPS) is 22 FPS, and the gap between Medium and High (48 FPS) is 7.6 FPS, while Ultra (34.8 FPS) represents a 13.2 FPS drop from High. This non-linear degradation at 4K points to memory bandwidth saturation: the RTX 3060 Ti's 448.0 GB/s bandwidth is the same regardless of resolution, but 4K requires exponentially more data movement. The CPU's role at 4K is minimal, as even the weakest preset yields 77.6 FPS, far above what the GPU can render.
Across all resolutions, the Ryzen 5 7600X's 6 cores and 12 threads with a 5.30 GHz boost clock are never the limiting factor. The data shows that even at 1080p Low with 161.3 FPS, the CPU does not bottleneck. This aligns with the CPU's 3dmark_max_threads score of 6845, indicating strong multi-threaded headroom for a game that likely uses fewer threads.
FAQ
Q: Can this PC run Lockdown Protocol at 1080p with maximum settings?
A: Yes. At 1920x1080 with Ultra settings, the average frame rate is 74.1 FPS, which is 14.1 FPS above the 60 FPS playable threshold. The data shows all four presets at this resolution clear 60 FPS, from Low at 161.3 FPS to Ultra at 74.1 FPS.
Q: What is the best playable setting at 1440p for 60 FPS?
A: High settings at 2560x1440 produce an average of 75 FPS, making it the most demanding preset that remains playable. Medium averages 81.3 FPS, but Ultra drops to 56.1 FPS, which is below the 60 FPS threshold.
Q: Is 4K gaming viable with this hardware combination?
A: Only at Low settings. The 3840x2160 Low preset averages 77.6 FPS, while Medium falls to 55.6 FPS, High to 48 FPS, and Ultra to 34.8 FPS. The verdict data confirms only Low is playable at 4K.
Q: How does the RTX 3060 Ti compare to its nearest rivals in overall performance?
A: The RTX 3060 Ti has an average benchmark score of 16129. Its nearest rival, the AMD Radeon RX 9060, scores 16014 (0.7% slower), while the AMD Radeon Pro 5600M scores 16351 (1.4% faster). The AMD Radeon RX 5700 XT scores 16361 (1.4% faster), and the AMD Radeon R9 370X scores 15862 (1.7% slower). These deltas are all within 2%, indicating nearly identical overall performance.
Q: How does the Ryzen 5 7600X stack up against similar CPUs?
A: The Ryzen 5 7600X has an average benchmark score of 27636, placing it in the 79th percentile of all CPUs. It is 0.2% faster than the AMD Ryzen 7 5700X (27578) and the Intel Core i5-12600K (27578), 0.3% slower than the AMD Ryzen 5 8500GE (27712), and 0.4% faster than the AMD Ryzen 7 5800 (27535).
Q: What is the best setting for 1080p if I want the highest visual quality while staying above 60 FPS?
A: Ultra is the answer. It averages 74.1 FPS at 1920x1080, which is the highest preset tested and still clears the threshold. High averages 97.2 FPS, Medium 115.5 FPS, and Low 161.3 FPS, but Ultra offers the best visual fidelity among playable options.
The Verdict
The data confirms this PC can run Lockdown Protocol at 1080p and 1440p with playable frame rates, but 4K is severely limited. At 1920x1080, all four presets — Low (161.3 FPS), Medium (115.5 FPS), High (97.2 FPS), and Ultra (74.1 FPS) — exceed the 60 FPS threshold. The verdict data designates Ultra as the best setting at this resolution, with an average FPS of 74.1.
At 2560x1440, three presets remain playable: High (75 FPS), Medium (81.3 FPS), and Low (114.7 FPS). Ultra falls short at 56.1 FPS. The best playable setting is High, averaging 75 FPS. At 3840x2160, only Low clears the threshold at 77.6 FPS; Medium (55.6 FPS), High (48 FPS), and Ultra (34.8 FPS) are all unplayable. The verdict data explicitly lists Low as the only playable option at 4K.
The frame rate data indicates this is a solid 1080p gaming machine that can handle 1440p with settings compromises. For 4K, the RTX 3060 Ti is the limiting factor, and users would need to accept minimal settings or reduce resolution. The combination ranks 2527 out of 3714 tested combos in this game, placing it in the lower-middle portion of the database, which aligns with the mixed results across resolutions.
Similar Performance Alternatives
For the CPU, the nearest rivals to the AMD Ryzen 5 7600X (average benchmark score 27636) are all within 0.4% performance delta. The AMD Ryzen 7 5700X and Intel Core i5-12600K both score 27578 (0.2% slower), meaning they would produce nearly identical frame rates in Lockdown Protocol. The AMD Ryzen 5 8500GE scores 27712 (0.3% faster), and the AMD Ryzen 7 5800 scores 27535 (0.4% slower). Any of these CPUs would behave essentially the same as the 7600X in this game, with the 5800 being the closest match at 0.4% difference.
For the GPU, the RTX 3060 Ti (average benchmark score 16129) has rivals with slightly larger deltas. The AMD Radeon RX 9060 scores 16014 (0.7% slower), the AMD Radeon Pro 5600M scores 16351 (1.4% faster), the AMD Radeon RX 5700 XT scores 16361 (1.4% faster), and the AMD Radeon R9 370X scores 15862 (1.7% slower). In practice, the RX 5700 XT or Pro 5600M would deliver marginally higher frame rates, but the differences are small enough that all four would yield similar playability classifications at each resolution and preset. The R9 370X, despite being 1.7% slower, would still follow the same 1080p and 1440p pattern, though its 4K performance would be slightly worse.
How This Combo Ranks
This specific combination of AMD Ryzen 5 7600X and NVIDIA GeForce RTX 3060 Ti ranks 2527 out of 3714 tested combos in Lockdown Protocol. This places it in the 32nd percentile of all tested combinations, meaning roughly two-thirds of the tested hardware pairings perform better. The ranking reflects the GPU's mid-range status (59th percentile among all GPUs) combined with the CPU's above-average position (79th percentile among all CPUs). The CPU is clearly not the bottleneck, as evidenced by the high frame rates at 1080p Low (161.3 FPS), so the ranking is primarily driven by the GPU's limitations at higher resolutions and presets.
The 4K results are where this combo loses ground. Only one of four presets clears 60 FPS, and the Ultra preset at 34.8 FPS is nearly half the playable threshold. In contrast, at 1080p, all presets exceed 74 FPS, which is competitive with more expensive configurations. The ranking of 2527 suggests that while this combo handles 1080p and 1440p well, it is not designed for 4K gaming, and users seeking 4K performance would need to look at higher-tier GPUs.
Measured FPS Breakdown
At 1920x1080, the measured average frame rates are as follows: Low settings produce 161.3 FPS, Medium produces 115.5 FPS, High produces 97.2 FPS, and Ultra produces 74.1 FPS. All four presets exceed the 60 FPS threshold, with Low nearly tripling it.
At 2560x1440, the averages are: Low at 114.7 FPS, Medium at 81.3 FPS, High at 75 FPS, and Ultra at 56.1 FPS. The drop from 1080p to 1440p is most pronounced at High settings (from 97.2 to 75 FPS) and Ultra (from 74.1 to 56.1 FPS), while Low and Medium see smaller reductions.
At 3840x2160, the averages are: Low at 77.6 FPS, Medium at 55.6 FPS, High at 48 FPS, and Ultra at 34.8 FPS. The 4K data shows a steep decline even from Medium to Low (22 FPS difference), and the gap between High and Ultra is 13.2 FPS. No min or max frame rate data was recorded for any resolution or preset, so the analysis relies solely on average values, which smooth over transient spikes or dips. The absence of min/max data means the 60 FPS threshold assessments are based on averages; actual gameplay could see occasional drops below 60 FPS even on presets that average above it.