Lockdown Protocol

This analysis evaluates the AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 4070 combination for running Lockdown Protocol, based on measured benchmark data. The data set includes FPS results across three resolutions and four quality presets, along with synthetic benchmark scores for both components. The verdict is determined by a playable threshold of 60 FPS, and the combo ranks 874th out of 3,714 tested combinations in this game.

How This Combo Ranks

The AMD Ryzen 5 7500X3D paired with the NVIDIA GeForce RTX 4070 holds a combo rank of 874 out of 3,714 tested combinations in Lockdown Protocol. This places the system in the upper quartile of tested hardware, roughly in the 76th percentile of all combos. The ranking reflects a balanced pairing: the RTX 4070 sits at the 81st percentile among all GPUs, while the Ryzen 5 7500X3D achieves an 89th percentile ranking among all CPUs. The slight CPU advantage suggests that the processor has headroom remaining when paired with this GPU in this specific title.

The GPU's average benchmark score of 37,648 places it within a tight cluster of rivals. The NVIDIA Tesla P4 scores 37,628, a delta of just 0.1% behind the RTX 4070. The AMD Radeon RX Vega 56 trails by 0.4% with a score of 37,507, while the AMD Radeon PRO W6400 sits 1.3% behind at 37,157. The only rival ahead is the NVIDIA GeForce RTX 4080 Mobile at 38,135, which leads by 1.3%. These deltas are small enough that in-game performance differences will be driven more by driver optimizations and thermal behavior than by raw compute capability.

On the CPU side, the Ryzen 5 7500X3D's average benchmark score of 44,573 is similarly tightly contested. The Intel Core i5-14600 leads by 0.7% with a score of 44,889, while the Intel Core Ultra X9 388H trails by 0.2% at 44,466. The Intel Core i9-13950HX scores 44,342, a 0.5% deficit, and the AMD Ryzen AI Max 385 scores 44,309, a 0.6% gap. For Lockdown Protocol, these sub-1% CPU differences are unlikely to create meaningful frame rate separations at higher resolutions, where GPU load dominates.

FAQ

Q: Can this combo run Lockdown Protocol at 4K resolution?

A: Yes. At 3840x2160, the system achieves playable frame rates on High, Medium, and Low settings. The High preset delivers 76 FPS average, Medium produces 87 FPS average with a minimum of 74 FPS, and Low reaches 123 FPS. Only the Ultra preset falls below the 60 FPS threshold at 57 FPS.

Q: What is the best quality setting at 2560x1440?

A: The Ultra preset is fully playable at 1440p, producing an average of 89 FPS. This makes Ultra the best setting at this resolution, as it clears the 60 FPS threshold comfortably. Lower presets also work: High averages 118 FPS, Medium averages 135 FPS, and Low averages 191 FPS.

Q: How does the RTX 4070 compare to its nearest GPU rivals?

A: The RTX 4070's average benchmark score of 37,648 is nearly identical to the NVIDIA Tesla P4's 37,628, just 0.1% apart. The AMD Radeon RX Vega 56 is 0.4% slower at 37,507, and the AMD Radeon PRO W6400 is 1.3% slower at 37,157. The only faster rival listed is the RTX 4080 Mobile at 38,135, which is 1.3% ahead.

Q: Is the Ryzen 5 7500X3D a bottleneck for this GPU?

A: The data does not indicate a CPU bottleneck. The CPU's single-thread score of 3,494 and multithread score of 25,047 are strong, and the combo's FPS scaling with resolution follows a GPU-bound pattern. At 1080p, the average FPS on Ultra is 121, dropping to 89 at 1440p and 57 at 4K, which is consistent with increasing GPU load rather than CPU limitation.

Q: What frame rates can be expected at 1920x1080 with maximum settings?

A: The Ultra preset at 1080p produces an average of 121 FPS with no reported minimum or maximum values in the data. This is well above the 60 FPS playable threshold, and the High preset reaches 161 FPS average, Medium hits 185 FPS, and Low achieves 260 FPS.

Q: Does the Medium preset provide stable frame pacing at any resolution?

A: The Medium preset is the only setting with reported minimum and maximum FPS values. At 1920x1080, the minimum is 157 FPS and the maximum is 213 FPS, with an average of 185. At 2560x1440, the minimum is 115 FPS and the maximum is 156 FPS, averaging 135. At 3840x2160, the minimum is 74 FPS and the maximum is 101 FPS, averaging 87. All three resolutions maintain minimums above 60 FPS.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four quality presets, with complete data for the Medium preset at every resolution. At 1920x1080, the Low preset delivers the highest average at 260 FPS, followed by Medium at 185 FPS with a minimum of 157 and maximum of 213, High at 161 FPS, and Ultra at 121 FPS. The 1080p results show a clear progression: each step up in quality reduces the average by roughly 40 FPS from Low to Medium, then 24 FPS from Medium to High, and 40 FPS from High to Ultra.

At 2560x1440, the Low preset averages 191 FPS, Medium averages 135 FPS with a minimum of 115 and maximum of 156, High averages 118 FPS, and Ultra averages 89 FPS. The transition from 1080p to 1440p reduces frame rates by approximately 26% across all presets, indicating a substantial GPU workload increase. The Medium preset's minimum of 115 FPS at 1440p indicates that even in demanding scenes, the system stays far above the 60 FPS threshold.

At 3840x2160, the Low preset averages 123 FPS, Medium averages 87 FPS with a minimum of 74 and maximum of 101, High averages 76 FPS, and Ultra drops to 57 FPS. The 4K results show the system's limits: only the Ultra preset falls below 60 FPS. The gap between Medium and High at 4K is 11 FPS, while the gap between High and Ultra is 19 FPS, suggesting that the Ultra preset imposes a significantly heavier rendering load.

The scaling from 1440p to 4K is steeper than from 1080p to 1440p. For the Medium preset, the average drops from 185 to 135 to 87 across the three resolutions, representing reductions of 27% and 36% respectively. This non-linear scaling indicates that the RTX 4070's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth become increasingly stressed at higher resolutions.

Similar Performance Alternatives

For the CPU, the nearest rivals to the Ryzen 5 7500X3D all score within 0.7% of its average benchmark score of 44,573. The Intel Core i5-14600 is the only rival that outperforms it, scoring 44,889, a 0.7% lead. The Intel Core Ultra X9 388H scores 44,466, a 0.2% deficit, making it the closest competitor. The Intel Core i9-13950HX scores 44,342, 0.5% behind, and the AMD Ryzen AI Max 385 scores 44,309, 0.6% behind. In Lockdown Protocol, these CPUs would produce nearly identical frame rates, with any differences masked by GPU limitations at higher resolutions.

For the GPU, the NVIDIA Tesla P4 is the closest rival, with a score of 37,628 versus the RTX 4070's 37,648, a delta of just 0.1%. This means the Tesla P4 would deliver virtually identical FPS in this game. The AMD Radeon RX Vega 56, scoring 37,507, trails by 0.4% and would produce slightly lower frame rates, likely 1-2 FPS less at any given setting. The AMD Radeon PRO W6400 at 37,157 is 1.3% slower, which could translate to roughly 1-3 FPS differences in practice. The NVIDIA GeForce RTX 4080 Mobile leads by 1.3% with a score of 38,135, potentially delivering 1-2 FPS more than the RTX 4070.

These small deltas mean that users considering alternative hardware should expect virtually identical gameplay experiences. The entire cluster of GPU rivals falls within a 1.3% performance band, which is within normal run-to-run variance for most games. The CPU rivals are even tighter, with a 0.7% spread between the fastest and slowest.

Best Settings per Resolution

At 1920x1080, the most demanding preset that maintains at least 60 FPS is Ultra, which achieves an average of 121 FPS. This is the best visual quality available while staying well above the playable threshold. The High preset reaches 161 FPS, Medium reaches 185 FPS, and Low reaches 260 FPS, but Ultra provides the highest fidelity without sacrificing playability.

At 2560x1440, the Ultra preset is again the best choice, averaging 89 FPS. This clears the 60 FPS threshold with a 29 FPS margin, leaving headroom for demanding scenes. The High preset averages 118 FPS, Medium averages 135 FPS, and Low averages 191 FPS, but Ultra offers the best visual experience while remaining smooth.

At 3840x2160, the most demanding playable preset is High, averaging 76 FPS. The Ultra preset falls to 57 FPS, below the 60 FPS threshold, so it is not recommended for 4K play. The Medium preset averages 87 FPS with a minimum of 74 FPS, and Low averages 123 FPS. High represents the best quality-to-performance tradeoff at 4K, providing a 16 FPS margin above the playable threshold.

The Verdict

This PC can run Lockdown Protocol at all three tested resolutions, with limitations only at the highest quality setting on 4K. At 1920x1080, all four presets clear the 60 FPS threshold, with Ultra providing the best experience at 121 FPS average. At 2560x1440, all four presets also clear 60 FPS, with Ultra at 89 FPS being the recommended choice. At 3840x2160, the High preset is the best playable option at 76 FPS, while Medium at 87 FPS offers a safer margin and Low at 123 FPS provides the smoothest experience. The Ultra preset at 4K, at 57 FPS, is the only configuration that fails the playable threshold.

The verdict data confirms these findings: 3840x2160 lists High, Low, and Medium as playable settings with High as the best at 76 FPS. Both 2560x1440 and 1920x1080 list all four presets as playable, with Ultra as the best setting in each case, at 89 FPS and 121 FPS respectively. For users with 4K displays, dropping from Ultra to High sacrifices some visual fidelity but gains a 19 FPS average improvement. For 1440p and 1080p users, no compromises are necessary.

CPU and GPU Roles

The data reveals which component dominates performance at each resolution by examining FPS scaling patterns. At 1080p, the CPU has more influence because the GPU can produce very high frame rates: the Low preset reaches 260 FPS, which requires the CPU to feed frames rapidly. The Ryzen 5 7500X3D's single-thread score of 3,494 and multithread score of 25,047 support this capability, and the 89th percentile CPU ranking indicates it handles this workload effectively.

As resolution increases, the GPU becomes the limiting factor. The transition from 1080p to 1440p reduces average FPS by roughly 26% across all presets, and from 1440p to 4K by another 30-36%. This scaling is characteristic of GPU-bound scenarios, where the RTX 4070's rendering capacity determines the frame rate. The CPU's role diminishes because the same number of frames per second requires less CPU work at lower frame rates.

The Medium preset data with minimum and maximum FPS values provides additional insight. At 1080p, the range spans from 157 to 213 FPS, a 56 FPS spread. At 1440p, the range narrows to 115 to 156, a 41 FPS spread. At 4K, the range tightens to 74 to 101, a 27 FPS spread. This narrowing range as resolution increases suggests that GPU workload becomes more consistent, while CPU-driven frame time variability has less impact at lower frame rates.

The RTX 4070's specifications support this interpretation: 29.15 TFLOPS FP32 performance, 158.4 GPixel/s pixel rate, and 455.4 GTexel/s texture rate. These figures scale with resolution demands, and the 4K Ultra result of 57 FPS indicates the GPU reaches its limit at that configuration. The CPU, with 6 cores and 12 threads based on the Zen 4 Raphael architecture, provides sufficient headroom that it does not appear to constrain performance at any tested resolution or preset.