Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Lockdown Protocol
FPS 2024

Lockdown Protocol

77%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
196 FPS
Ultra 1080p Measured
91 FPS

1440p (2K / QHD)

Low 1440p Measured
144 FPS
Ultra 1440p Measured
67 FPS

4K (Ultra HD)

Low 4K Measured
93 FPS
Ultra 4K Measured
43 FPS
8.3ms Frame Time
12ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 44,573
Graphics Card
Required 27,646
Your GPU 16,129

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 57 66 93
1440p QHD 67 89 102 144
1080p Full HD 91 121 139 196

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 121
1920x1080 Low 196
1920x1080 Medium 139
1920x1080 Ultra 91
2560x1440 High 89
2560x1440 Low 144
2560x1440 Medium 102
2560x1440 Ultra 67
3840x2160 High 57
3840x2160 Low 93
3840x2160 Medium 66
3840x2160 Ultra 43

Performance Analysis: Lockdown Protocol on Your System

The AMD Ryzen 5 7500X3D paired with the NVIDIA GeForce RTX 3060 Ti delivers a robust performance profile for Lockdown Protocol, with measured data showing the combo scaling from a playable 4K experience to a high-refresh-rate 1080p performer. The benchmark results indicate that this system’s capabilities are highly resolution-dependent, with the GPU acting as the primary bottleneck at higher pixel counts, while the CPU’s strong multi-threaded and single-threaded scores provide ample headroom for lower-resolution gaming.

Measured FPS Breakdown

The measured FPS data for this combo covers three resolutions—3840x2160 (4K), 2560x1440 (1440p), and 1920x1080 (1080p)—across four settings presets: Low, Medium, High, and Ultra. At 4K, the average frame rates start at 93 FPS on Low, drop to 66 FPS on Medium (with a minimum of 56 FPS and a maximum of 76 FPS), decline further to 57 FPS on High, and bottom out at 43 FPS on Ultra. The 4K Low preset stands out as the only 4K setting that comfortably exceeds the 60 FPS playable threshold by a wide margin, while the Medium preset barely clears it with an average of 66 FPS, though its minimum frame rate dips below the threshold.

Moving to 2560x1440, the performance envelope improves markedly. The Low preset achieves an average of 144 FPS, followed by Medium at 102 FPS (with a minimum of 87 FPS and a maximum of 117 FPS), High at 89 FPS, and Ultra at 67 FPS. The 1440p results show a consistent decline as settings increase, but every preset maintains an average above the 60 FPS threshold, with the Ultra preset’s 67 FPS average being the most demanding scenario that still passes the playability test. The Medium preset’s minimum of 87 FPS indicates solid frame pacing even during demanding scenes.

At 1920x1080, the combination delivers its highest raw performance. The Low preset averages 196 FPS, Medium averages 139 FPS (with a minimum of 118 FPS and a maximum of 160 FPS), High averages 121 FPS, and Ultra averages 91 FPS. All 1080p presets clear the 60 FPS threshold with substantial headroom, and even the Ultra preset’s 91 FPS average provides a smooth experience for high-refresh-rate monitors. The scaling from 4K to 1080p shows a consistent doubling of performance at each preset level, with the Low preset jumping from 93 FPS to 196 FPS, indicating that resolution is the dominant factor in this game’s performance profile.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 7500X3D CPU, based on average benchmark scores, include the Intel Core Ultra X9 388H, which scores 44466 with a deltaPct of 0.2%, placing it effectively at parity. The Intel Core i9-13950HX follows with a score of 44342 and a deltaPct of 0.5%, meaning the Ryzen 5 7500X3D is marginally ahead. The AMD Ryzen AI Max 385 scores 44309 with a deltaPct of 0.6%, showing similar close competition. On the opposite side, the Intel Core i5-14600 scores 44889 with a deltaPct of -0.7%, indicating the Ryzen 5 7500X3D trails this rival by less than one percent. These rivals are all within a tight performance band, suggesting that swapping the CPU for any of these would yield nearly identical frame rates in Lockdown Protocol.

For the GPU, the NVIDIA GeForce RTX 3060 Ti’s nearest rivals are the AMD Radeon RX 9060, which scores 16014 with a deltaPct of 0.7%, meaning the RTX 3060 Ti is slightly ahead. The AMD Radeon Pro 5600M scores 16351 with a deltaPct of -1.4%, indicating the RTX 3060 Ti trails this mobile workstation GPU by a small margin. The AMD Radeon RX 5700 XT scores 16361 with a deltaPct of -1.4%, showing similar performance to the Pro 5600M. The AMD Radeon R9 370X scores 15862 with a deltaPct of 1.7%, meaning the RTX 3060 Ti outperforms this older card by nearly two percent. These GPU rivals suggest that users with any of these cards would experience near-identical frame rates, though the RTX 3060 Ti’s 59th percentile ranking versus all GPUs indicates it sits in the mid-range tier.

CPU and GPU Roles

The benchmark data reveals that the GPU is the primary performance driver at higher resolutions, while the CPU provides sufficient headroom to avoid becoming a bottleneck at lower settings. At 4K, the frame rates scale dramatically with settings—from 93 FPS on Low to 43 FPS on Ultra—a 116% drop that points to GPU workload limits. The CPU’s PassMark multi-thread score of 25047 and single-thread score of 3494 are strong, but the GPU’s 16.20 TFLOPS FP32 compute and 448.0 GB/s memory bandwidth are the limiting factors at this pixel count.

At 1440p, the scaling pattern persists but with smaller gaps: Low at 144 FPS, Medium at 102 FPS, High at 89 FPS, and Ultra at 67 FPS. The 115% increase from Ultra to Low at this resolution mirrors the 4K pattern, confirming GPU-bound behavior. However, the CPU’s role becomes more apparent at 1080p, where the Low preset hits 196 FPS and Ultra reaches 91 FPS—a 115% difference that still favors GPU scaling. The CPU’s 96 MB of shared L3 cache and 6 cores with 12 threads are sufficient to feed the GPU at these frame rates, as evidenced by the consistent average FPS without stutter-inducing minimums at 1080p Medium (118 FPS minimum).

The data indicates that lowering resolution from 4K to 1080p yields roughly a 100% average FPS increase across all presets, while lowering settings from Ultra to Low at a fixed resolution yields a similar percentage gain. This suggests both resolution and settings equally tax the GPU, with the CPU contributing less to overall performance differences. The CPU’s percentile ranking of 89 versus all CPUs places it well above the GPU’s 59th percentile, reinforcing that the RTX 3060 Ti is the performance ceiling for this combination.

The Verdict

This PC can run Lockdown Protocol at all tested resolutions and presets, but the playable settings vary by resolution. At 3840x2160, the verdict data lists Low and Medium as playable, with the best settings being Medium at an average of 66 FPS. The 4K Ultra preset’s 43 FPS and High preset’s 57 FPS fall below the 60 FPS playable threshold, making them unsuitable for a consistent experience.

At 2560x1440, all four presets—High, Low, Medium, and Ultra—are playable, with the best settings being Ultra at an average of 67 FPS. This resolution offers the widest range of options, allowing users to choose between maximum visual quality at 67 FPS or competitive frame rates at 144 FPS on Low. At 1920x1080, similarly all presets are playable, with Ultra at 91 FPS being the best settings, providing a smooth experience even at maximum quality. The system clears the 60 FPS threshold at every resolution with at least one preset, but only 1440p and 1080p offer playable Ultra settings.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which delivers an average of 66 FPS with a minimum of 56 FPS and a maximum of 76 FPS. This preset balances visual fidelity with performance, though the minimum frame rate dips slightly below the threshold, suggesting occasional dips during intense action. At 2560x1440, the best settings are Ultra, achieving an average of 67 FPS—this preset provides the highest visual quality while maintaining a playable average, although no minimum or maximum data is available for this specific configuration.

At 1920x1080, the best settings are also Ultra, with an average of 91 FPS. This preset offers a comfortable margin above the 60 FPS threshold, and the absence of min/max data for this setting suggests a stable frame rate profile. Comparing the three, the 1080p Ultra preset delivers a 38% higher average FPS than the 1440p Ultra preset (91 versus 67 FPS), and a 38% higher average than the 4K Medium preset (91 versus 66 FPS). Users seeking the highest quality should target 1080p Ultra, while those prioritizing resolution over settings can use 1440p Ultra or 4K Medium.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 3060 Ti ranks 1854 out of 3714 tested combos in Lockdown Protocol, placing it in the 50th percentile of all systems evaluated. This mid-pack ranking aligns with the GPU’s 59th percentile performance versus all GPUs and the CPU’s 89th percentile versus all CPUs, indicating that the GPU drags the overall combo ranking down despite the CPU’s strong showing. The rank suggests that roughly half of tested systems outperform this combo, while half perform worse, making it a balanced mid-range option.

The deltaPct values from the nearest rivals provide context: the CPU’s closest rival, the Intel Core Ultra X9 388H, is within 0.2% performance, meaning CPU swaps would not affect the combo rank. Similarly, the GPU’s closest rival, the AMD Radeon RX 9060, is within 0.7%, so GPU swaps to that card would yield nearly identical rankings. The rank of 1854 out of 3714 implies that systems with higher-tier GPUs, such as those in the 90th percentile, would rank significantly higher, while this combo’s strengths lie in its CPU capabilities rather than its overall FPS output.

FAQ

Q: What is the best resolution for this PC to run Lockdown Protocol?

A: The data shows 1920x1080 offers the highest frame rates, with Ultra settings achieving 91 FPS, while 2560x1440 Ultra achieves 67 FPS and 3840x2160 Medium achieves 66 FPS. The 1080p resolution provides the most headroom above the 60 FPS threshold.

Q: Can this system run the game at 4K?

A: Yes, but only on Low (93 FPS) and Medium (66 FPS) settings. The High preset falls to 57 FPS and Ultra drops to 43 FPS, both below the 60 FPS playable threshold.

Q: Which component limits performance more in this game?

A: The GPU is the limiting factor, as indicated by the RTX 3060 Ti’s 59th percentile versus all GPUs, compared to the CPU’s 89th percentile. Frame rates scale significantly with settings and resolution, showing GPU-bound behavior.

Q: How does this combo compare to systems with a similar CPU but different GPU?

A: The CPU’s nearest rivals, such as the Intel Core Ultra X9 388H (0.2% deltaPct), would perform identically in terms of CPU-driven tasks, but the GPU choice dictates overall FPS. Swapping to a GPU like the AMD Radeon RX 9060 (0.7% deltaPct) would yield near-identical performance.

Q: What is the lowest average FPS this combo produces?

A: The lowest average FPS is 43 at 3840x2160 Ultra settings, which is the most demanding configuration tested. The next lowest is 57 FPS at 4K High.

Q: Does this combo achieve 144 FPS in any configuration?

A: Yes, at 2560x1440 Low settings the average FPS is 144, and at 1920x1080 Low settings it reaches 196 FPS. These are the only presets that exceed 144 FPS in the measured data.