Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing but may impact FPS.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 25 | 33 | 38 | 53 |
| 1440p QHD | 38 | 51 | 59 | 82 |
| 1080p Full HD | 52 | 70 | 80 | 112 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
This PC configuration pairs AMD’s six-core Zen 4 desktop processor with NVIDIA’s entry-level Ampere GPU, which is equipped with 4 GB of GDDR6 memory on a 128-bit bus. Benchmark data for Lockdown Protocol shows that this combo is highly resolution-sensitive: it delivers smooth frame rates at 1080p, becomes playable only on the lowest preset at 1440p, and falls short of the 60 FPS threshold entirely at 4K. The measured results reveal a system that is well-balanced for 1080p gaming but is held back by the GPU’s limited memory bandwidth and capacity at higher resolutions. Below is a detailed breakdown of the measured performance, component roles, and the best settings for each resolution.
Measured FPS Breakdown
The benchmark results for Lockdown Protocol are measured across three resolutions and four quality presets, providing a clear picture of how this hardware scales. At 1920x1080, the configuration performs admirably. On the Low preset, the average frame rate is 112 FPS, which is more than enough for high-refresh-rate monitors. The Medium preset delivers an average of 80 FPS, with a minimum of 68 FPS and a maximum of 92 FPS, indicating that frame pacing remains stable even during intense scenes. The High preset drops to an average of 70 FPS, still comfortably above the 60 FPS playable threshold. The Ultra preset, however, is the outlier at 1080p: the average falls to 52 FPS, which sits below the 60 FPS line and suggests that the 4 GB VRAM buffer is starting to become a bottleneck.
Moving to 2560x1440, the performance hit is significant. The Low preset yields an average of 82 FPS, which is still playable, though the margin above 60 FPS is thinner than at 1080p. The Medium preset drops to 59 FPS on average, with a minimum of 50 FPS and a maximum of 67 FPS — this is borderline, as the average just misses the 60 FPS target. The High preset falls to 51 FPS, and the Ultra preset bottoms out at 38 FPS. The gap between Low and Ultra at 1440p is 44 FPS, showing that the GPU’s fill rate and memory subsystem are heavily taxed as image quality increases.
At 3840x2160, the configuration struggles across the board. The Low preset averages 53 FPS, which is short of the 60 FPS threshold. The Medium preset averages 38 FPS, with a minimum of 32 FPS and a maximum of 43 FPS — frame times will be noticeably inconsistent. The High preset drops to 33 FPS, and the Ultra preset averages just 25 FPS. None of the 4K presets come close to the playable threshold, and the 4 GB frame buffer is almost certainly the limiting factor, as texture data exceeds available VRAM at this resolution.
CPU and GPU Roles
The division of labor between the AMD Ryzen 5 7500F and the RTX 3050 4 GB becomes evident when comparing frame rates across resolutions. The CPU is a capable six-core processor with a boost clock of 5.00 GHz and a substantial 32 MB of shared L3 cache. Its benchmark results, such as a Cinebench R23 multi-core score of 22799 and a single-core score of 3218, indicate strong gaming performance. At 1080p, the CPU is powerful enough to keep up with the GPU, as evidenced by the 112 FPS result on Low. As resolution increases, the GPU becomes the dominant constraint. The frame rate drop from 112 FPS at 1080p Low to 82 FPS at 1440p Low is a 27% reduction, which is a direct consequence of the GPU’s rendering load rather than CPU limitation. Similarly, at 4K Low, the average falls to 53 FPS, a further 35% reduction from 1440p.
The scaling between presets at a fixed resolution reinforces this. At 1080p, moving from Low to Medium costs 32 FPS, from Medium to High costs another 10 FPS, and from High to Ultra costs 18 FPS. This pattern suggests that the CPU can handle the increased draw calls and physics calculations, but the GPU’s shader cores and memory bandwidth are saturated. The RTX 3050 4 GB has 2048 shading units and a memory bandwidth of 192.0 GB/s, which is modest for modern titles. At 4K, the differences between presets are smaller in absolute terms — 25 FPS at Ultra versus 53 FPS at Low — indicating that the GPU is hitting a hard ceiling where even reducing settings yields diminishing returns. The 4 GB VRAM capacity likely causes texture streaming to spill into system memory, creating stutters that the minimum FPS figures partially capture.
Best Settings per Resolution
Based on the measured data, the most demanding preset that maintains an average of at least 60 FPS varies by resolution. At 1920x1080, the High preset is the best choice, delivering an average of 70 FPS. This provides a significant visual improvement over Medium while still leaving a 10 FPS margin above the playable threshold. Pushing to Ultra drops the average to 52 FPS, which is not worth the visual gain for most players. At 2560x1440, only the Low preset clears the 60 FPS bar, with an average of 82 FPS. The Medium preset averages 59 FPS, which is technically below the threshold, so Low is the only safe option for consistent performance. At 3840x2160, no preset achieves a 60 FPS average; the closest is Low at 53 FPS, which is still 7 FPS short. This resolution is not viable for smooth gameplay with this hardware.
The Verdict
The data is clear: this PC can run Lockdown Protocol at playable frame rates at 1080p and 1440p, but not at 4K. At 1920x1080, the system clears the 60 FPS threshold on Low, Medium, and High presets, with High being the best visually demanding option at 70 FPS average. At 2560x1440, only the Low preset achieves a playable average of 82 FPS; Medium falls just short at 59 FPS, and High and Ultra are below 51 FPS. At 3840x2160, all presets fail to reach 60 FPS, with the best case being Low at 53 FPS. The verdict by resolution confirms this: playable settings are limited to Low at 1440p, while 1080p offers three playable presets. For 4K gaming, the RTX 3050 4 GB is simply not sufficient, and users should either lower the resolution or accept sub-60 FPS performance. The overall combo rank in the game is 3269 out of 3714 tested combinations, placing it in the lower third of systems.
Similar Performance Alternatives
For the CPU, the AMD Ryzen 5 7500F’s nearest rivals offer nearly identical performance. The Intel Core i7-11850H has an average benchmark score of 24935, which is just 0.1% lower than the Ryzen’s 24964 average. The AMD Ryzen 5 8400F scores 25005, a marginal 0.2% higher. The Intel Core i7-13620H scores 24911, 0.2% lower, and the Intel Core 5 210H scores 24872, 0.4% lower. In practice, these differences are negligible, and any of these processors would yield similar frame rates in Lockdown Protocol when paired with the same GPU. The Ryzen 5 7500F itself performs well in synthetic tests, with a Geekbench multi-core score of 12362 and a Passmark multi-thread score of 26825, placing it in the 77th percentile of all CPUs.
The GPU has no nearest rivals listed in the data, so direct comparisons are not available. However, the RTX 3050 4 GB’s performance is characterized by its 50th percentile ranking among all GPUs and its modest specifications. Its 7.127 TFLOPS of FP32 performance and 192.0 GB/s memory bandwidth are typical of an entry-level card from the GeForce 30-series. Given that the CPU is not the bottleneck at higher resolutions, users upgrading from a similar GPU class should focus on the graphics card to improve 1440p and 4K performance.
FAQ
Q: Can this PC run Lockdown Protocol at 1080p with high settings?
A: Yes. The measured average FPS on the High preset at 1920x1080 is 70 FPS, which is above the 60 FPS playable threshold. The Medium preset averages 80 FPS, and Low averages 112 FPS.
Q: Is the RTX 3050 4 GB sufficient for 1440p gaming in Lockdown Protocol?
A: Only on the Low preset. The average FPS at 2560x1440 Low is 82 FPS, which is playable. The Medium preset averages 59 FPS, just below the threshold, and High and Ultra are below 51 FPS.
Q: What is the best preset for 4K in Lockdown Protocol with this hardware?
A: None of the presets achieve a 60 FPS average at 3840x2160. The Low preset comes closest with an average of 53 FPS, but it is still below the playable threshold.
Q: How does the Ryzen 5 7500F compare to its closest rivals?
A: The differences are minimal. The Intel Core i7-11850H is 0.1% slower, the AMD Ryzen 5 8400F is 0.2% faster, the Intel Core i7-13620H is 0.2% slower, and the Intel Core 5 210H is 0.4% slower in average benchmark scores.
Q: Does the CPU or GPU limit performance at 1080p?
A: At 1080p, the GPU is the primary limiter on higher presets. The CPU has strong single-core performance, but the RTX 3050 4 GB’s 4 GB VRAM and 192.0 GB/s bandwidth cause the Ultra preset to drop to 52 FPS, indicating a graphics-side bottleneck.
Q: Is the 4 GB VRAM a problem for Lockdown Protocol?
A: Yes, particularly at higher resolutions. At 1440p and 4K, the frame rate drops sharply between Low and Medium presets, and the minimum FPS figures at 4K Medium (32 FPS) suggest texture data is exceeding the frame buffer. At 1080p, the Ultra preset also suffers, likely due to VRAM pressure.