Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 61 | 82 | 93 | 132 |
| 1440p QHD | 95 | 126 | 145 | 204 |
| 1080p Full HD | 129 | 172 | 197 | 278 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5070 combination delivers a thoroughly playable experience in Lockdown Protocol across all tested resolutions and settings, with the data showing that even the most demanding preset at 4K clears the 60 FPS threshold. Benchmark results indicate a system that scales predictably with resolution, maintaining high frame rates from 1080p through 2160p, though the margin for error narrows considerably as pixel count rises.
Measured FPS Breakdown
The measured FPS data for this combo in Lockdown Protocol shows a clear hierarchy across resolutions and presets, with average frame rates ranging from a low of 61 FPS at 4K Ultra to a high of 278 FPS at 1080p Low.
At 1920x1080, the system is overwhelmingly fast. The Low preset delivers an average of 278 FPS, while Medium reaches 197 FPS with a minimum of 168 FPS and a maximum of 227 FPS. High settings produce 172 FPS average, and Ultra still maintains a robust 129 FPS. No frame rate data dips near the 60 FPS playability threshold at this resolution, indicating substantial headroom for high-refresh-rate monitors.
Moving to 2560x1440, performance remains exceptional but begins to show the expected scaling penalty. The Low preset averages 204 FPS, while Medium drops to 145 FPS with a minimum of 123 FPS and maximum of 166 FPS. High settings yield 126 FPS average, and Ultra settles at 95 FPS. The gap between Low and Ultra at this resolution is 109 FPS, a substantial spread that highlights the impact of graphical fidelity on performance.
At 3840x2160, the demands of 4K rendering become evident. Low settings still produce a very playable 132 FPS average, but Medium falls to 93 FPS with a minimum of 79 FPS and maximum of 107 FPS. High settings average 82 FPS, and Ultra drops to 61 FPS — the lowest average recorded in the entire dataset. While 61 FPS technically clears the 60 FPS playability threshold, it leaves minimal margin for frame time spikes or demanding in-game sequences.
The data shows that Medium is the only preset at each resolution with recorded minimum and maximum values, providing insight into frame consistency. At 1080p Medium, the minimum of 168 FPS represents a 14.7% drop from the average, while at 1440p the minimum of 123 FPS is 15.2% below average, and at 4K the 79 FPS minimum is 15.1% below the average of 93 FPS. This consistent variance pattern suggests stable frame pacing across resolutions.
FAQ
Q: Can this PC run Lockdown Protocol at 4K Ultra settings?
A: Yes, but barely. The 3840x2160 Ultra preset averages 61 FPS, which clears the 60 FPS playability threshold by only 1 FPS. This leaves almost no headroom for demanding scenes or background processes.
Q: What is the best resolution for this combo in Lockdown Protocol?
A: The data shows 2560x1440 as a strong sweet spot, with Ultra settings averaging 95 FPS. This provides both high visual fidelity and a comfortable margin above the 60 FPS threshold, unlike 4K Ultra where the margin is minimal.
Q: How much performance is gained by lowering settings from Ultra to Low?
A: At 1080p, the gain from Ultra to Low is 149 FPS (from 129 to 278 FPS). At 1440p, the gain is 109 FPS (from 95 to 204 FPS), and at 4K, the gain is 71 FPS (from 61 to 132 FPS). The relative gain increases at lower resolutions.
Q: Is the RTX 5070 or the Ryzen 5 7400F the limiting factor?
A: The scaling between resolutions indicates the GPU becomes the dominant constraint at higher pixel counts. At 4K Ultra, the system produces 61 FPS, while at 1080p Ultra it reaches 129 FPS — a 111% increase that suggests the CPU is sufficient to feed the GPU at lower resolutions.
Q: Does this combo rank high among tested configurations?
A: The combo ranks 727th out of 3714 tested combinations, placing it in the top 19.6% of all tested combos for Lockdown Protocol. This is a strong showing, though not near the very top of the leaderboard.
Q: What frame rates can be expected at 1080p with High settings?
A: The 1920x1080 High preset averages 172 FPS. This is well above the 60 FPS threshold and suitable for high-refresh-rate displays, though the Low preset at 278 FPS would be preferred for competitive play.
CPU and GPU Roles
The benchmark data reveals a clear division of labor between the AMD Ryzen 5 7400F and the NVIDIA GeForce RTX 5070 depending on resolution and preset. The 7400F, with its 6 cores and 12 threads, posts a Cinebench R23 multi-core score of 21765 and a single-core score of 3072, placing it in the 83rd percentile of all CPUs. The RTX 5070, meanwhile, achieves a Passmark G3D score of 29137 and sits in the 82nd percentile of all GPUs.
At 1080p, the system produces 278 FPS on Low settings and 129 FPS on Ultra. The enormous gap between these presets — 149 FPS — suggests the GPU is heavily involved in determining frame rates even at this lower resolution, as the CPU has ample headroom to feed the graphics card. The 7400F's single-core performance of 3072 in Cinebench R23 is strong enough to avoid bottlenecking at these frame rates.
The scaling from 1080p to 1440p shows a moderate performance drop across all presets. Ultra falls from 129 to 95 FPS (a 26.4% reduction), while Low falls from 278 to 204 FPS (a 26.6% reduction). This consistent percentage decline indicates that the GPU is becoming more influential as pixel count increases, though the CPU still keeps pace.
At 4K, the pattern accelerates. Ultra drops to 61 FPS (a 35.8% reduction from 1440p), while Low drops to 132 FPS (a 35.3% reduction). The near-uniform percentage drops across all presets at each resolution step suggest that resolution scaling is the primary factor, with the RTX 5070's 12 GB of GDDR7 memory and 672.0 GB/s bandwidth becoming the key constraint. The GPU's 82nd percentile ranking among all GPUs aligns with this interpretation, as does the CPU's 83rd percentile — both components are competent, but the GPU handles the increasing rendering load.
In terms of presets, the difference between Low and Ultra at 4K is 71 FPS, whereas at 1080p it is 149 FPS. This narrowing gap at higher resolutions indicates that the GPU is saturated at 4K, limiting the performance headroom available from lowering settings. The CPU, meanwhile, maintains consistent performance across presets, as evidenced by the relatively stable frame rates at each resolution when only settings change.
The Verdict
Can this PC run Lockdown Protocol? The data unequivocally says yes, and at every tested configuration. The verdictByResolution data shows that all four presets — Low, Medium, High, and Ultra — are playable at each of the three resolutions tested, with the playable threshold set at 60 FPS.
At 3840x2160, the best playable settings are Ultra, which averages 61 FPS. This is technically above the threshold but by the slimmest margin in the entire dataset. Players seeking a more comfortable experience at 4K would be better served by High settings at 82 FPS or Medium at 93 FPS, both of which offer substantial headroom.
At 2560x1440, the system excels. Ultra settings average 95 FPS, providing high visual quality with a 58% margin above the 60 FPS threshold. This is the resolution where the combo delivers the best balance of fidelity and performance, making it the recommended target for most users.
At 1920x1080, performance is exceptional across the board. Ultra averages 129 FPS, which is more than double the playability threshold. For competitive play, Low settings at 278 FPS would be the choice, while High at 172 FPS offers a strong compromise between visuals and speed.
The RTX 5070's 12 GB of VRAM is sufficient for all tested presets and resolutions, and the Ryzen 5 7400F's 65 W TDP and 5 nm process node keep power requirements modest. The CPU's 83rd percentile ranking and the GPU's 82nd percentile ranking indicate a well-matched pairing for this title.
How This Combo Ranks
In the comprehensive database of tested combinations for Lockdown Protocol, this pairing of AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5070 ranks 727th out of 3714 total combos. This places the system in the top 19.6% of all tested configurations, a strong result that underscores its capability in this game.
The CPU's nearest rivals in terms of average benchmark score include the Intel Core i5-14600T at 32707 (0.1% lower), the Intel Core Ultra 7 155H at 32697 (0.2% lower), and the AMD Ryzen AI 7 PRO 360 at 32662 (0.3% lower), while the AMD Ryzen 7 PRO 6850H at 32812 is 0.2% higher. The 7400F's average benchmark score of 32750 places it in the 83rd percentile of all CPUs, indicating solid mid-high range positioning.
The GPU's nearest rivals show a similar pattern. The AMD Radeon Pro 580 scores 40318 (0.1% lower), the AMD Radeon Pro WX 7100 scores 40063 (0.8% lower), and the NVIDIA RTX A500 Mobile scores 39568 (2% lower), while the AMD Radeon Pro 5300 scores 40870 (1.2% higher). The RTX 5070's average benchmark score of 40377 puts it in the 82nd percentile of all GPUs.
The rank of 727 out of 3714 suggests that while this combo is clearly capable, there are 726 configurations that perform better in Lockdown Protocol. These would likely feature higher-tier GPUs or CPUs, but the data does not specify which combinations rank above this pairing. For the vast majority of players, a top-20% ranking is more than sufficient for a smooth experience.
Best Settings per Resolution
The optimal settings for Lockdown Protocol at each resolution balance visual quality against the 60 FPS playability floor, and the data provides clear guidance for each target.
At 3840x2160, the most demanding preset that maintains at least 60 FPS is Ultra, which averages exactly 61 FPS. This is the highest fidelity option available, but the margin above the threshold is razor-thin at 1 FPS. Players who prefer stability over maximum visual quality should consider High settings at 82 FPS, which offers a 36.7% margin above the threshold and more consistent frame delivery.
At 2560x1440, Ultra settings are the clear recommendation, averaging 95 FPS. This provides a 58.3% margin above the playability threshold while delivering the full visual feature set. The gap between Ultra at 95 FPS and High at 126 FPS is substantial, but both comfortably exceed 60 FPS, so the choice comes down to whether the extra 31 FPS from High settings is worth the visual trade-off.
At 1920x1080, Ultra is again the best choice, averaging 129 FPS. This is more than double the playability threshold, giving players ample headroom for high-refresh-rate displays. The 129 FPS average at Ultra is still 115% above the 60 FPS minimum, making this an excellent configuration for competitive play where both visual clarity and responsiveness matter.
For players using high-refresh-rate monitors (144 Hz or above), the data suggests that 1080p Medium at 197 FPS or 1440p Low at 204 FPS would be better suited, as these presets push frame rates into territory where the display's refresh rate becomes the limiting factor rather than the GPU. However, for standard 60 Hz displays, Ultra settings at any resolution deliver an excellent experience, with 4K being the only configuration where the margin is tight.