Lockdown Protocol

The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4060 combination delivers a solid 1080p and 1440p experience in Lockdown Protocol, but 4K gaming requires a compromise on visual fidelity. Measured data shows this pairing is capable of exceeding the 60 FPS playable threshold at most settings, though the most demanding preset at 4K falls short. This analysis breaks down the optimal settings per resolution, the balance between CPU and GPU workload, and how this specific hardware stack compares to other tested configurations.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains an average of at least 60 FPS is Medium, which produces an average of 63 FPS. While the Low preset reaches higher frame rates at 89 FPS average, Medium offers a better visual experience while still staying above the playable threshold. The High preset at this resolution dips to 55 FPS average, just below the 60 FPS target, and Ultra drops further to 42 FPS average, making both unsuitable for smooth gameplay.

For 2560x1440, the entire settings range is playable, but the Ultra preset is the best choice, delivering an average of 64 FPS. This is notable because Ultra at 1440p essentially matches the frame rate of Medium at 4K, showing the resolution scaling efficiency of this hardware. The High preset provides a healthier 86 FPS average, Medium hits 98 FPS, and Low reaches 138 FPS average, but Ultra remains the optimal balance between visual quality and performance at this resolution.

At 1920x1080, the Ultra preset is again the best playable option, with an average of 88 FPS. This is comfortably above the 60 FPS threshold and leaves headroom for demanding scenes. The High preset delivers 117 FPS average, Medium reaches 134 FPS, and Low pushes to 189 FPS average. Since all presets exceed the playable threshold, choosing Ultra maximizes image quality without sacrificing smoothness.

CPU and GPU Roles

The data indicates that the GPU becomes the primary bottleneck at higher resolutions, while the CPU has more influence at lower resolutions. This is evident from the scaling pattern across the resolution range. At 1920x1080, the difference between Low and Ultra is 101 FPS (189 vs 88), showing that the graphics card has significant headroom to work with when the resolution is lower. At 2560x1440, the same settings gap narrows to 74 FPS (138 vs 64), and at 3840x2160, it shrinks further to 47 FPS (89 vs 42).

The CPU’s role is most apparent at 1080p Low, where the frame rate reaches 189 FPS average. This high ceiling suggests the Ryzen 5 7400F, with its 6 cores and 12 threads, is capable of feeding the RTX 4060 efficiently at lower graphical loads. The CPU’s single-core performance, reflected in its Cinebench R23 single-core score of 3072, helps maintain high frame rates in less demanding scenarios.

As resolution increases to 1440p and 4K, the GPU workload grows disproportionately. The RTX 4060’s 8 GB of GDDR6 memory and 272.0 GB/s bandwidth become more significant factors. The transition from 1080p Ultra (88 FPS) to 1440p Ultra (64 FPS) represents a 27% performance drop, while the move from 1440p Ultra to 4K Ultra (42 FPS) is a 34% drop. This indicates that the GPU is the limiting factor at higher resolutions, with the CPU’s influence diminishing as pixel count increases.

Similar Performance Alternatives

For the CPU, the nearest rivals to the AMD Ryzen 5 7400F are all within a narrow performance band. The Intel Core i5-14600T has an average score of 32707, which is only 0.1% lower than the Ryzen’s 32750 average. The Intel Core Ultra 7 155H scores 32697, a 0.2% deficit. The AMD Ryzen 7 PRO 6850H actually scores slightly higher at 32812, a 0.2% advantage, while the AMD Ryzen AI 7 PRO 360 trails by 0.3% with 32662. These processors would behave nearly identically in Lockdown Protocol, meaning any of them paired with the RTX 4060 would produce similar frame rates.

On the GPU side, the RTX 4060’s nearest competitors are somewhat unexpected. The AMD Radeon HD 7790 scores 17666, which is 0.2% higher than the RTX 4060’s 17639 average benchmark score. The AMD Radeon 780M comes in at 17588, a 0.3% deficit. The AMD Radeon Pro 560 scores 17551, 0.5% lower, and the AMD Radeon Pro 460 trails by 0.7% with 17509. These GPUs would offer similar performance levels, though their feature sets and driver support may differ. The RTX 4060’s 24 RT cores and 96 tensor cores provide additional capabilities that these rivals may lack, but for raw frame rates in Lockdown Protocol, they would be close.

FAQ

Q: What is the best 4K setting for this combo?

A: The Medium preset at 3840x2160 is the highest quality option that maintains an average of at least 60 FPS, delivering 63 FPS average. High and Ultra fall below the playable threshold at 55 and 42 FPS respectively.

Q: Can this system run Ultra settings at 1440p?

A: Yes, the Ultra preset at 2560x1440 produces an average of 64 FPS, which is above the 60 FPS playable threshold. All four settings presets at this resolution are playable, with Low reaching 138 FPS average.

Q: How much faster is 1080p compared to 4K at the same settings?

A: At Ultra settings, 1080p delivers 88 FPS average compared to 42 FPS at 4K, representing a 46 FPS difference. At Low settings, the gap widens to 100 FPS (189 vs 89).

Q: Which component is more important for 1080p gaming?

A: The CPU has more influence at 1080p, as evidenced by the high frame rates at Low settings (189 FPS average). The Ryzen 5 7400F’s strong single-core performance (Cinebench R23 score of 3072) helps sustain high frame rates when the GPU is not fully taxed.

Q: Is the Medium preset at 4K smooth enough for competitive play?

A: With an average of 63 FPS, the Medium preset at 3840x2160 exceeds the 60 FPS playable threshold. However, the minimum frame rate is 54 FPS, which could cause occasional stutters in intense scenes.

Q: How does this combo rank compared to other tested configurations?

A: This pairing ranks 2009 out of 3714 tested combos in Lockdown Protocol, placing it in the middle of the distribution. The rank reflects its balanced performance across resolutions, though it is not among the top configurations.

Measured FPS Breakdown

At 3840x2160, the measured results show a clear progression across settings. The Low preset averages 89 FPS. Medium averages 63 FPS, with a minimum of 54 FPS and a maximum of 73 FPS. High drops to 55 FPS average, and Ultra falls to 42 FPS average. The spread from Low to Ultra is 47 FPS, indicating that the GPU is heavily taxed at this resolution.

For 2560x1440, the settings scale more gracefully. Low averages 138 FPS. Medium averages 98 FPS, with a minimum of 83 FPS and a maximum of 113 FPS. High reaches 86 FPS average, and Ultra delivers 64 FPS average. The range from Low to Ultra is 74 FPS, showing better GPU headroom at this resolution.

At 1920x1080, the combo performs strongly across all presets. Low averages 189 FPS. Medium averages 134 FPS, with a minimum of 114 FPS and a maximum of 154 FPS. High hits 117 FPS average, and Ultra provides 88 FPS average. The 101 FPS difference between Low and Ultra is the largest of any resolution, confirming that the GPU has significant performance reserves at 1080p.

How This Combo Ranks

The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4060 combination is ranked 2009 out of 3714 tested combos in Lockdown Protocol. This places it in the 54th percentile of all tested configurations, meaning slightly more than half of the tested hardware combos perform better. The ranking reflects the balanced nature of this setup: it delivers playable frame rates at 1080p and 1440p across all settings, but struggles at 4K with higher presets.

The CPU’s benchmark percentile of 83 among all CPUs indicates strong processing capability, while the GPU’s percentile of 61 among all GPUs is more modest. This disparity suggests that the GPU is the limiting factor in this pairing, which is consistent with the resolution scaling data. At 1080p, the CPU can push frame rates to nearly 190 FPS at Low settings, but the GPU caps performance at higher graphical loads.

The combination’s mid-pack ranking is unsurprising given that the RTX 4060 is positioned as a mainstream GPU rather than a high-end part. The Ryzen 5 7400F, despite its strong benchmark scores, does not boost the combo into the upper echelon because the GPU cannot keep pace at demanding settings. For gamers targeting 1080p or 1440p, this ranking is acceptable, but those seeking top-tier 4K performance would need a more powerful GPU. The data shows that this combo is best suited for high-refresh-rate 1080p gaming or solid 1440p gameplay, with 4K reserved for medium presets or lower.