Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Lockdown Protocol
FPS 2024

Lockdown Protocol

78%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
248 FPS
Ultra 1080p Measured
123 FPS

1440p (2K / QHD)

Low 1440p Measured
192 FPS
Ultra 1440p Measured
88 FPS

4K (Ultra HD)

Low 4K Measured
125 FPS
Ultra 4K Measured
56 FPS
6.3ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 21,088
Graphics Card
Required 27,646
Your GPU 41,187

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 56 74 86 125
1440p QHD 88 119 135 192
1080p Full HD 123 160 186 248

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 160
1920x1080 Low 248
1920x1080 Medium 186
1920x1080 Ultra 123
2560x1440 High 119
2560x1440 Low 192
2560x1440 Medium 135
2560x1440 Ultra 88
3840x2160 High 74
3840x2160 Low 125
3840x2160 Medium 86
3840x2160 Ultra 56

Performance Analysis: Lockdown Protocol on Your System

The AMD Ryzen 5 5600G and NVIDIA GeForce RTX 3080 Ti combination delivers a wide range of performance in Lockdown Protocol, with the CPU acting as a potential bottleneck at lower resolutions while the GPU dominates at 4K. Measured frame rates show that this pairing is capable of smooth play across most settings, though the most demanding 4K preset falls short of the 60 FPS threshold. The data indicates that the RTX 3080 Ti provides enough headroom to push high refresh rates at 1080p and 1440p, while the Ryzen 5 5600G's Zen 3 architecture carries the load in CPU-bound scenarios.

Measured FPS Breakdown

At 1920x1080, the combination posts its highest raw numbers, with the Low preset averaging 247.9 FPS. Medium settings drop to 185.9 FPS, while High averages 159.7 FPS. The Ultra preset still manages a very strong 122.8 FPS average. These figures show that at 1080p, the RTX 3080 Ti is never the limiting factor — the frame rates scale almost linearly with preset demands, and even the heaviest settings clear the playable threshold by more than double.

Moving to 2560x1440, the average frame rates remain high but show the expected impact of increased pixel count. Low averages 191.7 FPS, Medium drops to 134.7 FPS, and High comes in at 119.2 FPS. Ultra at 1440p still produces 88.4 FPS, which is comfortably above the 60 FPS playable threshold. The gap between Low and Ultra at this resolution is roughly 103 FPS, indicating that the GPU has plenty of bandwidth to handle both resolution and settings changes.

At 3840x2160, the performance picture changes significantly. Low settings average 124.5 FPS, which is still excellent for 4K gaming. Medium drops to 85.8 FPS, and High averages 74.2 FPS. The Ultra preset at 4K falls to 56 FPS, which is below the 60 FPS playable threshold. This marks the only configuration in the entire measured set where the combo cannot maintain a playable average frame rate. The drop from High to Ultra at 4K is 18.2 FPS, a steeper decline than at lower resolutions, suggesting that Ultra settings introduce rendering costs that the RTX 3080 Ti cannot fully offset at 4K.

The data shows no minimum or maximum frame rate values, so the analysis relies solely on averages. The measured results indicate that the combo scales predictably: each step down in resolution at the same preset yields roughly a 1.5x to 2x increase in average FPS. For example, High at 1080p (159.7 FPS) is nearly double High at 4K (74.2 FPS). Similarly, Ultra at 1440p (88.4 FPS) is significantly higher than Ultra at 4K (56 FPS). This scaling pattern points to the GPU being the dominant factor at 4K, while the CPU's role becomes more pronounced at lower resolutions.

FAQ

Q: Can this system run Lockdown Protocol at 4K with playable frame rates?

A: Yes, but not on the Ultra preset. The measured data shows that High settings at 3840x2160 average 74.2 FPS, Medium averages 85.8 FPS, and Low averages 124.5 FPS. Only Ultra at 4K falls below the 60 FPS threshold, averaging 56 FPS.

Q: What is the best settings preset for 1440p gaming?

A: All four presets are playable at 2560x1440. The verdictByResolution data lists High, Low, Medium, and Ultra as playable, with Ultra being the best settings option at an average of 88.4 FPS.

Q: How does the Ultra preset at 1080p compare to High at 4K?

A: Ultra at 1920x1080 averages 122.8 FPS, which is 48.6 FPS higher than High at 3840x2160 (74.2 FPS). This shows that resolution has a larger impact on performance than the preset level for this combo.

Q: Is the RTX 3080 Ti the bottleneck at 1080p?

A: No. At 1920x1080, the frame rates range from 122.8 FPS (Ultra) to 247.9 FPS (Low), which are high enough to suggest the CPU is more likely to be the limiting factor. The Ryzen 5 5600G has a 74th percentile ranking among all CPUs, which is solid but not top-tier.

Q: What is the playable threshold and which settings meet it?

A: The playable threshold is 60 FPS. At 3840x2160, High, Low, and Medium all exceed this, with High being the best playable setting. At both 2560x1440 and 1920x1080, all four presets including Ultra clear the threshold.

Q: Does the 12 GB of VRAM on the RTX 3080 Ti matter for this game?

A: The measured data does not include VRAM usage figures, so it is not possible to determine whether memory capacity becomes a limiting factor. The benchmark results show performance declines at 4K Ultra, but the cause is not specified in the data.

CPU and GPU Roles

The measured FPS scaling between resolutions and presets clarifies which component matters more in Lockdown Protocol. At 3840x2160, the frame rate drops sharply as settings increase, with Ultra averaging 56 FPS compared to Low at 124.5 FPS. This pattern indicates that the RTX 3080 Ti is the primary constraint at 4K, as the GPU must process nearly double the pixels of 1440p while also handling higher graphical loads.

At 2560x1440, the combo shows a different balance. The gap between Low (191.7 FPS) and Ultra (88.4 FPS) is 103.3 FPS, which is substantial but smaller in relative terms than at 4K. The fact that even Ultra at 1440p stays well above 60 FPS suggests the GPU still has capacity, and the Ryzen 5 5600G's six cores and twelve threads are sufficient to feed the GPU at this resolution.

At 1920x1080, the CPU role becomes more apparent. The frame rates are remarkably high across all presets, ranging from 122.8 FPS on Ultra to 247.9 FPS on Low. These numbers are so high that the RTX 3080 Ti is unlikely to be the limiting factor — the GPU would need to render far more frames per second than typical for a 1080p display. The Ryzen 5 5600G, with a boost clock of 4.40 GHz and a single-thread score of 872 in 3dmark, likely caps performance at this resolution. The CPU's 74th percentile ranking among all CPUs supports this interpretation.

The scaling between resolutions further confirms this split. Moving from 1080p to 1440p at the same preset reduces FPS by roughly 25-30% (e.g., High drops from 159.7 to 119.2 FPS). Moving from 1440p to 4K at the same preset reduces FPS by 35-40% (e.g., High drops from 119.2 to 74.2 FPS). The larger relative drop at 4K indicates the GPU is straining harder there, while the smaller drop at 1440p suggests the CPU is keeping pace more effectively.

Similar Performance Alternatives

The nearestRivals data provides context for both components. For the AMD Ryzen 5 5600G, the closest CPU alternatives are the Intel Core i3-1220P with an average score of 21066 (0.1% higher), the Intel Core Ultra 7 256V at 21112 (-0.1% lower), the AMD Ryzen 5 7530U at 21133 (-0.2% lower), and the Intel Core Ultra 7 155U at 21174 (-0.4% lower). These CPUs are all within a fraction of a percent in average benchmark score, meaning a system builder swapping the 5600G for any of these would see nearly identical CPU-bound performance in Lockdown Protocol. The Intel Core i3-1220P is the closest match, with a delta of just 0.1%, so it would behave almost exactly the same in this game.

For the NVIDIA GeForce RTX 3080 Ti, the nearest GPU rivals are the AMD Radeon Pro 5300 with an average score of 40870 (0.8% higher), the NVIDIA Tesla M40 24 GB at 41707 (-1.2% lower), the NVIDIA Tesla M40 at 41897 (-1.7% lower), and the NVIDIA GeForce RTX 5070 at 40377 (2% higher). The RTX 5070 is the most interesting comparison, as it is 2% higher in average score, meaning it would deliver slightly better frame rates in GPU-bound scenarios like 4K Ultra. The AMD Radeon Pro 5300 is also very close, with a 0.8% higher score, so it would produce nearly identical results at all resolutions. The Tesla M40 variants score lower, but by a small margin — a 1.7% deficit would translate to roughly 1-2 FPS difference at 4K Ultra.

These rival comparisons suggest that the combo's performance is well-established within its hardware tier. A builder with an RTX 5070 instead of the 3080 Ti would see marginally higher frame rates, but the difference would be negligible in practice. Similarly, swapping the 5600G for an Intel Core i3-1220P would produce no measurable change in CPU-bound scenarios.

How This Combo Ranks

The combo ranks 969th out of 3714 tested combinations in Lockdown Protocol, placing it in the upper third of all systems tested. This rank reflects a balance of CPU and GPU performance that is strong enough for high-refresh 1080p and 1440p gaming, but not exceptional for 4K Ultra. The percentileVsAllCpus of 74 for the CPU and percentileVsAllGpus of 83 for the GPU indicate that the GPU is the stronger component in this pairing. The CPU sits below the GPU in relative performance, which aligns with the measured bottleneck behavior at lower resolutions.

The rank of 969 out of 3714 means roughly 74% of tested combos perform worse, while about 26% perform better. This puts the combo in a solid position for a mid-range CPU paired with a high-end GPU. The data suggests that the Ryzen 5 5600G holds back the RTX 3080 Ti in some scenarios, particularly at 1080p where frame rates exceed what most displays can show. At 4K, the GPU becomes the limiting factor, and the combo's rank reflects that it cannot handle the most demanding preset at that resolution.

The Verdict

The data shows that this PC can run Lockdown Protocol at all three tested resolutions, with the caveat that 4K Ultra is not playable. At 1920x1080, all four presets — Low, Medium, High, and Ultra — clear the 60 FPS threshold, with Ultra averaging 122.8 FPS. This makes 1080p the most versatile resolution for this combo, allowing maximum graphical fidelity without sacrificing smoothness. At 2560x1440, all presets also clear 60 FPS, with Ultra averaging 88.4 FPS, so 1440p gamers can use the highest settings and still maintain a high refresh rate experience.

At 3840x2160, the situation is more nuanced. High, Low, and Medium are all playable, with High being the best setting at 74.2 FPS average. The Ultra preset at 4K averages 56 FPS, which falls below the 60 FPS playable threshold, so players at 4K should avoid Ultra settings unless they accept a frame rate dip. The verdictByResolution data confirms this, listing High as the best playable setting at 4K with an average of 74.2 FPS.

For most users, this combo is a strong choice for 1080p and 1440p gaming with headroom for high refresh rates. At 4K, it handles High settings comfortably but struggles with the most demanding preset. The Ryzen 5 5600G is a capable CPU for this game, though its 74th percentile ranking suggests it may limit performance at very high frame rates. The RTX 3080 Ti, with its 83rd percentile ranking, provides the graphical muscle needed for 4K gaming, but the combination's overall rank of 969 out of 3714 shows there are better-performing pairings for those who prioritize absolute maximum settings at 4K.