Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing but may impact FPS.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 25 | 33 | 38 | 53 |
| 1440p QHD | 38 | 51 | 59 | 82 |
| 1080p Full HD | 52 | 70 | 80 | 112 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
The AMD Ryzen 5 5600F paired with the NVIDIA GeForce RTX 3050 4 GB delivers a highly resolution-dependent experience in Lockdown Protocol, with the data showing a clear ceiling at 1080p and a sharp falloff as pixel count increases. Measured FPS results place this combo in the 3269th position out of 3714 tested configurations, indicating that while it can handle the game at lower resolutions, it struggles to maintain smooth performance at higher demands.
Measured FPS Breakdown
At 3840x2160, the RTX 3050 4 GB is clearly overburdened. The Low preset produces an average of 53 FPS, which is the only setting in this resolution that approaches playability. Medium drops to 38 FPS average, with minimums of 32 and maximums of 43. High falls further to 33 FPS average, and Ultra bottoms out at 25 FPS average. None of these figures clear the 60 FPS playability threshold, and the spread between Low and Ultra is a substantial 28 FPS, showing how quickly the GPU's 4 GB memory and 192.0 GB/s bandwidth become limiting factors.
Moving to 2560x1440, the situation improves meaningfully. The Low preset delivers an average of 82 FPS, which is comfortably above the 60 FPS threshold. Medium produces 59 FPS average, with a minimum of 50 and a maximum of 67, placing it just shy of playable. High averages 51 FPS, while Ultra drops to 38 FPS. The gap between Low and Ultra here is 44 FPS, indicating that settings scaling has a dramatic impact on performance at this resolution.
At 1920x1080, the combo finally shows its strengths. Low settings yield 112 FPS average, which is more than enough for competitive play. Medium averages 80 FPS, with a minimum of 68 and a maximum of 92. High delivers 70 FPS average, and Ultra falls to 52 FPS. The difference between Low and Ultra at 1080p is 60 FPS, the largest spread across all resolutions, suggesting that the CPU has enough headroom to push higher frame rates when the GPU is less constrained.
The data shows a consistent pattern: each resolution step down from 4K to 1080p brings roughly a doubling of performance on equivalent settings. For instance, Low goes from 53 FPS at 4K to 82 FPS at 1440p to 112 FPS at 1080p. Similarly, High goes from 33 to 51 to 70 FPS across the same resolution ladder. This scaling behavior points to the GPU being the primary bottleneck at higher resolutions, while the CPU's six Zen 3 cores and 12 threads provide sufficient support at lower pixel counts.
CPU and GPU Roles
The benchmark results indicate that the GPU is the dominant constraint in Lockdown Protocol at higher resolutions. The Ryzen 5 5600F, with its 6 cores and 12 threads running at a 3.00 GHz base and 4.00 GHz boost clock, shows no signs of holding back performance until the resolution drops to 1080p. Evidence for this comes from the scaling between resolutions: at 4K, the Ultra preset averages 25 FPS, while at 1080p the same preset averages 52 FPS. This 27 FPS improvement is attributable almost entirely to reduced pixel workload, not CPU capability.
The CPU's role becomes more apparent when examining the 1080p results. At this resolution, the Low preset reaches 112 FPS, which is a high enough frame rate that the CPU's single-thread performance (PassMark single-thread score of 2872) begins to matter. However, the fact that Medium still achieves 80 FPS and High 70 FPS suggests the CPU is not a hard bottleneck even at 1080p. The drop from Low to Ultra at 1080p is 60 FPS, and this steep decline indicates the GPU's 4 GB memory capacity and 7.127 TFLOPS FP32 throughput are the limiting factors when visual complexity increases.
Between 1440p and 4K, the performance delta is consistent across all settings, averaging around 20 FPS. This uniformity suggests the workload scales predictably with pixel count, and the GPU's memory bandwidth of 192.0 GB/s becomes the critical resource. The RTX 3050's 128-bit bus and 4 GB GDDR6 memory are simply insufficient for 4K textures and shader complexity, as evidenced by the 25 FPS Ultra result at that resolution.
Best Settings per Resolution
At 3840x2160, no preset achieves the 60 FPS playability threshold. The best option is Low, which produces an average of 53 FPS, but this still falls short of the required performance. The verdict data confirms that no playable settings exist at this resolution for this combo.
At 2560x1440, the best playable setting is Low, which delivers 82 FPS average. This is the only preset that clears the 60 FPS threshold at this resolution, and it does so with a comfortable margin. Medium comes close at 59 FPS average, but its minimum of 50 FPS means there will be noticeable dips during intense scenes, so Low is the recommended choice for consistent performance.
At 1920x1080, the best playable setting is High, which averages 70 FPS. This is the most demanding preset that maintains at least 60 FPS, and it provides a solid balance between visual quality and smoothness. Medium also clears the threshold at 80 FPS average, and Low reaches 112 FPS, but High offers the best visual experience while staying above the playability line. Ultra falls short at 52 FPS average, so it should be avoided despite its visual appeal.
The Verdict
This PC configuration can run Lockdown Protocol, but only under specific conditions. At 1920x1080, the system is fully playable across three presets: High at 70 FPS, Medium at 80 FPS, and Low at 112 FPS. The High preset is the recommended choice, as it provides the best visual quality while maintaining a 10 FPS buffer above the 60 FPS threshold.
At 2560x1440, the system is playable only on Low settings, which deliver 82 FPS average. This gives users a viable 1440p experience, but they must accept reduced visual fidelity. The Medium preset's 59 FPS average is tantalizingly close to playable, but the 50 FPS minimum means it will drop below the threshold during gameplay.
At 3840x2160, the system is not playable at any preset. The best result is 53 FPS on Low, which falls 7 FPS short of the 60 FPS requirement. Users with 4K displays should avoid this resolution or consider lowering their display scaling.
FAQ
Q: Can this PC run Lockdown Protocol at 1080p with High settings?
A: Yes, the measured average FPS is 70, which exceeds the 60 FPS playability threshold by 10 FPS.
Q: What is the highest resolution at which this combo achieves 60 FPS?
A: 2560x1440, but only on Low settings, which produces an average of 82 FPS.
Q: Is the RTX 3050 4 GB capable of 4K gaming in Lockdown Protocol?
A: No, the best result at 3840x2160 is 53 FPS average on Low, which is below the 60 FPS threshold.
Q: How much performance is lost between 1080p Low and 1080p Ultra?
A: The average FPS drops from 112 to 52, a difference of 60 FPS, representing a 54% reduction.
Q: Does the Ryzen 5 5600F bottleneck the RTX 3050 in this game?
A: No, the data shows the GPU is the limiting factor, especially at higher resolutions where the CPU has ample headroom.
Q: What is the minimum FPS on Medium settings at 1440p?
A: The minimum is 50 FPS, with an average of 59 FPS and a maximum of 67 FPS.
How This Combo Ranks
The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 3050 4 GB combination ranks 3269th out of 3714 tested combos for Lockdown Protocol, placing it in the bottom 12% of configurations. This low ranking is primarily due to the GPU's limitations at higher resolutions, as the CPU itself performs respectably in synthetic benchmarks. The Ryzen 5 5600F achieves an average benchmark score of 36945, placing it in the 85th percentile of all CPUs, which indicates the processor is not the weak link in this pairing.
The ranking reflects the overall experience across all tested resolutions and presets. While the combo handles 1080p well, its failure at 4K and limited playability at 1440p drag down its standing. For context, the GPU's 4 GB memory capacity is a significant drawback in modern FPS titles, and the benchmark data confirms this limitation is fully realized in Lockdown Protocol.
Similar Performance Alternatives
The Ryzen 5 5600F's nearest rivals in CPU performance are closely matched, with all within 0.5% of its average benchmark score of 36945. The Intel Core Ultra 5 225 scores 36938, a 0% delta. The AMD Ryzen 5 5500X3D scores 37018, which is 0.2% higher. The AMD Ryzen AI 7 PRO 450 scores 37093, 0.4% higher. The Intel Core i9-12900T scores 37112, 0.5% higher. Any of these CPUs would deliver nearly identical performance in Lockdown Protocol when paired with the same GPU, as the differences are within measurement noise.
For the GPU, the nearestRivals field is empty, meaning no directly comparable graphics cards were listed in the dataset. However, the RTX 3050's performance characteristics are well-established through the measured FPS data. The GPU's 50th percentile ranking among all GPUs indicates it sits exactly at the median, which aligns with the observed 1080p performance being adequate but not exceptional. Users considering alternatives should focus on GPUs with more than 4 GB of memory, as the data shows this capacity is the primary constraint at higher resolutions and settings.