Lockdown Protocol

Measured FPS Breakdown

The recorded data for Lockdown Protocol shows a clear scaling pattern across resolutions and presets for the AMD Ryzen 5 5600F paired with the NVIDIA GeForce RTX 2060. At 1920x1080, the combo delivers strong performance across the board. Low settings produce an average of 145 FPS, Medium averages 103 FPS with a minimum of 88 FPS and a maximum of 119 FPS, High averages 90 FPS, and Ultra averages 67 FPS. The 1080p results indicate that even the most demanding preset stays comfortably above the 60 FPS playability threshold, with Ultra retaining a 7 FPS margin over that line.

Moving to 2560x1440, the averages drop but remain respectable. Low settings deliver 106 FPS, Medium averages 76 FPS with a minimum of 64 FPS and a maximum of 87 FPS, and High averages 66 FPS. Ultra falls to 49 FPS, which places it below the 60 FPS threshold. The Medium preset's minimum of 64 FPS shows that the combination can hold playable frame rates even during demanding scenes, while High maintains a narrower but still sufficient average.

At 3840x2160, the picture changes significantly. Low settings average 69 FPS, which clears the playability threshold. Medium averages 49 FPS with a minimum of 41 FPS and a maximum of 56 FPS, High averages 43 FPS, and Ultra averages 32 FPS. The 4K data shows that only the Low preset keeps the system at or above 60 FPS, and even then the margin is slim at 9 FPS. The gap between Low and Medium at this resolution is 20 FPS, indicating that the RTX 2060's 6 GB frame buffer and 192-bit memory bus become limiting factors as texture and shading workloads increase.

How This Combo Ranks

Within the database of tested combinations for Lockdown Protocol, this pairing ranks 2941 out of 3714 combos. That places it in the 21st percentile of all tested systems, meaning roughly 79 percent of recorded configurations deliver higher average performance in this game. The ranking reflects the RTX 2060's position in the GPU hierarchy; the card sits at the 58th percentile among all GPUs, while the Ryzen 5 5600F ranks at the 85th percentile among all CPUs. The CPU is clearly not the bottleneck here, as its benchmark scores are strong, but the GPU's mid-range standing drags the overall combo down in a game that appears to scale heavily with graphics hardware.

The CPU's average benchmark score is 36945, placing it near the top of its class. Its nearest rivals in the database include the Intel Core Ultra 5 225 with an average score of 36938 and a delta of 0 percent, the AMD Ryzen 5 5500X3D at 37018 with a delta of -0.2 percent, the AMD Ryzen AI 7 PRO 450 at 37093 with a delta of -0.4 percent, and the Intel Core i9-12900T at 37112 with a delta of -0.5 percent. These differences are negligible, meaning the 5600F delivers compute performance statistically identical to those alternatives. The GPU, meanwhile, averages 15290 points, with rivals like the NVIDIA GeForce GTX 580 at 15283 (0 percent delta), the AMD Radeon 680M at 15270 (0.1 percent delta), the NVIDIA GeForce RTX 3050 OEM at 15199 (0.6 percent delta), and the AMD Radeon RX 7600 at 15171 (0.8 percent delta). The RTX 2060 is effectively tied with those four alternatives in raw benchmark terms.

The combination's rank suggests that while the CPU is overqualified for this workload, the GPU limits overall frame delivery. The measured FPS data confirms this interpretation: at 1080p Ultra, the system hits 67 FPS, which is playable but not overwhelming, and at 1440p Ultra it drops to 49 FPS. A stronger GPU would likely push those numbers higher without requiring a CPU change.

Best Settings per Resolution

For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which delivers an average of 67 FPS. This is the full visual experience with the highest quality options enabled, and the system still maintains a 7 FPS margin over the playability threshold. Users at this resolution can run the game at maximum settings without compromise.

At 2560x1440, the best playable setting is High, averaging 66 FPS. This preset clears the 60 FPS line by 6 FPS, but Ultra falls short at 49 FPS. The Medium preset also works at 76 FPS, but High offers superior visual quality while still maintaining a comfortable average. The minimum recorded for Medium at this resolution is 64 FPS, which suggests that High likely experiences occasional dips below its average, but the average itself remains solidly playable.

For 3840x2160, only Low settings achieve playable performance, averaging 69 FPS. This preset clears the threshold by 9 FPS, but Medium drops to 49 FPS and High to 43 FPS. The 4K resolution demands more from the GPU's memory bandwidth and shading units, and the RTX 2060 can only keep up with reduced graphical fidelity. The step from Low to Medium costs 20 FPS, a substantial penalty that indicates a hard performance wall rather than a gradual scaling curve.

Similar Performance Alternatives

The CPU's nearest rivals in the database are all within 0.5 percent of its average score. The Intel Core Ultra 5 225 matches the 5600F almost exactly with a delta of 0 percent, meaning systems using that processor would perform identically in CPU-bound scenarios. The AMD Ryzen 5 5500X3D trails by 0.2 percent, the AMD Ryzen AI 7 PRO 450 by 0.4 percent, and the Intel Core i9-12900T by 0.5 percent. For Lockdown Protocol, where the GPU is the limiting factor, swapping the 5600F for any of these alternatives would produce virtually indistinguishable frame rates.

On the GPU side, the RTX 2060's nearest rivals are also tightly clustered. The NVIDIA GeForce GTX 580 matches with a 0 percent delta, the AMD Radeon 680M is 0.1 percent ahead, the NVIDIA GeForce RTX 3050 OEM is 0.6 percent behind, and the AMD Radeon RX 7600 is 0.8 percent behind. The GTX 580 is an older architecture but delivers comparable raw compute in the database's measurements, while the Radeon 680M is an integrated solution that somehow keeps pace in synthetic tests. In practice, the RTX 2060's 6 GB VRAM and DirectX 12 Ultimate support may give it advantages in specific game workloads, but the benchmark data shows these four GPUs as near-equivalents.

Buyers looking for similar performance should target any of these pairings: the Ryzen 5 5600F with a GTX 580, RTX 3050 OEM, or RX 7600 would deliver nearly identical frame rates to the measured results. Alternatively, pairing one of the rival CPUs with the RTX 2060 would also yield the same outcome, since the GPU remains the bottleneck across all tested presets.

FAQ

Q: Can this system run Lockdown Protocol at 1920x1080 with maximum settings?

A: Yes. At 1920x1080 with Ultra settings, the system averages 67 FPS, which is above the 60 FPS playability threshold. The Ultra preset is the most demanding option available, and the combination clears it by 7 FPS.

Q: What is the best setting to use at 2560x1440?

A: High settings deliver an average of 66 FPS at 2560x1440, making it the most demanding preset that stays playable. Ultra averages 49 FPS, which falls below the 60 FPS threshold, so High is the recommended choice for visual quality and smooth performance.

Q: Is 4K gaming viable with this hardware?

A: Only at Low settings. At 3840x2160 with Low settings, the system averages 69 FPS, which clears the threshold. Medium drops to 49 FPS, High to 43 FPS, and Ultra to 32 FPS, so any preset above Low will not maintain playable frame rates.

Q: How does the Ryzen 5 5600F compare to its closest rivals?

A: The CPU's nearest rivals are all within 0.5 percent of its average benchmark score of 36945. The Intel Core Ultra 5 225 matches it exactly, while the AMD Ryzen 5 5500X3D, AMD Ryzen AI 7 PRO 450, and Intel Core i9-12900T trail by fractions of a percent. These differences are negligible in real-world gaming.

Q: What GPUs perform similarly to the RTX 2060?

A: The NVIDIA GeForce GTX 580, AMD Radeon 680M, NVIDIA GeForce RTX 3050 OEM, and AMD Radeon RX 7600 all score within 0.8 percent of the RTX 2060's average benchmark score of 15290. Systems with any of these GPUs would deliver similar frame rates in Lockdown Protocol.

Q: Is the CPU or GPU the limiting factor for this game?

A: The GPU is the limiting factor. The Ryzen 5 5600F ranks at the 85th percentile among all CPUs, while the RTX 2060 ranks at the 58th percentile among all GPUs. The FPS data shows that higher resolutions cause steep performance drops, which indicates GPU-bound scaling.

The Verdict

The AMD Ryzen 5 5600F with the NVIDIA GeForce RTX 2060 can run Lockdown Protocol, but the experience depends heavily on resolution and settings. At 1920x1080, the system handles every preset including Ultra, which averages 67 FPS. This is the most favorable scenario, and users with 1080p monitors can enable maximum visual quality while staying above the 60 FPS threshold.

At 2560x1440, the system remains playable at High settings with an average of 66 FPS. Medium is also viable at 76 FPS, but Ultra drops to 49 FPS and should be avoided. The recorded minimum for Medium at this resolution is 64 FPS, so even demanding scenes should stay fluid, though High may dip closer to the threshold during intense combat.

At 3840x2160, only Low settings clear the 60 FPS line, averaging 69 FPS. Medium, High, and Ultra all fall below playable levels, with averages of 49, 43, and 32 FPS respectively. Users targeting 4K will need to accept significant visual compromises or consider upgrading the GPU, since the RTX 2060's 6 GB memory and 336.0 GB/s bandwidth cannot sustain higher presets at this resolution.

The overall ranking of 2941 out of 3714 combos indicates that this system sits below average for Lockdown Protocol, but the game is still playable at common resolutions. The CPU is not a concern, as its performance rivals match it within fractions of a percent, but the GPU's mid-tier standing limits the ceiling. For 1080p gaming, this combo is fully capable. For 1440p, it works with tuned settings. For 4K, it only functions at the lowest quality preset. The combination is a serviceable mid-range setup, and the data supports running the game at High or Ultra at 1080p, High at 1440p, and Low at 4K.