Lockdown Protocol

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3060 Ti combination delivers a highly playable experience in Lockdown Protocol, but the margin of comfort depends heavily on the resolution target. At 1920x1080, the pairing is overwhelmingly capable, with every tested preset clearing the 60 FPS threshold. Moving to 2560x1440 maintains solid playability across most settings, though the Ultra preset begins to strain the system. At 3840x2160, the data reveals a sharp drop-off in performance, with only the Low preset remaining viable. The measured frame rates show a consistent pattern: this hardware is best suited for 1080p and 1440p gaming, with 4K requiring significant graphical compromises.

Measured FPS Breakdown

The benchmark data for Lockdown Protocol provides a clear picture of performance scaling across three resolutions and four quality presets. At 1920x1080, the average frame rates are exceptionally high across the board. The Low preset delivers an average of 157.5 FPS, which drops to 112.4 FPS at Medium settings. High settings maintain a strong 97.1 FPS average, and even the most demanding Ultra preset keeps an average of 76 FPS. All four presets at this resolution comfortably exceed the 60 FPS playability threshold, with the gap between Low and Ultra representing a 53.4% reduction in frame rate.

At 2560x1440, the performance picture shifts noticeably. The Low preset still produces an impressive 114.6 FPS average, while Medium settings achieve 83.1 FPS. High settings remain playable at 70.7 FPS, but Ultra drops to 52.9 FPS, falling below the 60 FPS threshold. The delta between Low and Ultra at this resolution is 61.7 FPS, showing a steeper performance penalty for maximum quality settings compared to 1080p.

The 3840x2160 results reveal the most significant challenges. Low settings produce an average of 77.6 FPS, which is still playable but represents a large drop from the 157.5 FPS seen at 1080p Low. Medium settings fall to 52.5 FPS, High settings reach only 49.2 FPS, and Ultra drops to 33.6 FPS. The scaling from 1080p to 4K at Low settings shows a 50.7% performance loss, while at Ultra settings the loss is even more pronounced, with the 4K average being just 44.2% of the 1080p average.

Best Settings per Resolution

For each resolution, the data identifies the most demanding preset that still maintains an average frame rate at or above 60 FPS. At 1920x1080, the Ultra preset qualifies with an average of 76 FPS. This means users can enable maximum quality settings without sacrificing smooth gameplay. The 16 FPS margin above the threshold provides a safety buffer for demanding scenes, though min FPS data is not available in this dataset.

At 2560x1440, the High preset is the best playable option, delivering an average of 70.7 FPS. This represents a meaningful step down from Ultra, but the 10.7 FPS margin over the threshold still offers a reasonable experience. The Ultra preset at this resolution falls short at 52.9 FPS, making it unsuitable for consistent 60 FPS gameplay.

At 3840x2160, the Low preset is the only playable option, with an average of 77.6 FPS. While this is a comfortable margin above the threshold, it requires sacrificing nearly all graphical quality settings. The High preset at 49.2 FPS and Medium at 52.5 FPS both fall short, while Ultra at 33.6 FPS is far too demanding for this hardware configuration at 4K.

CPU and GPU Roles

The benchmark data reveals how the CPU and GPU split responsibilities in Lockdown Protocol across different resolutions. The Ryzen 5 5600, with its 6 cores and 12 threads, provides a solid foundation for the game's FPS mechanics. The GPU, the RTX 3060 Ti with 8 GB of GDDR6 memory, becomes the primary bottleneck as resolution increases.

The scaling between 1080p and 1440p shows a moderate performance drop across all presets. At Low settings, the average FPS falls from 157.5 to 114.6, a 27.2% reduction. At Ultra settings, the drop is from 76 to 52.9, a 30.4% reduction. This relatively uniform scaling suggests that both components are working in balance at these resolutions, with the GPU handling the increased pixel count while the CPU maintains adequate frame pacing.

The jump from 1440p to 4K tells a different story. At Low settings, the average FPS drops from 114.6 to 77.6, a 32.3% reduction. However, at High settings, the drop is from 70.7 to 49.2, a 30.4% reduction, and at Ultra settings, from 52.9 to 33.6, a 36.5% reduction. The GPU's memory bandwidth of 448.0 GB/s and 8 GB capacity become limiting factors at 4K, particularly at higher presets where texture quality and shading demands increase. The CPU's role diminishes at 4K as the GPU becomes the clear performance ceiling.

The preset scaling within each resolution further clarifies component roles. At 1080p, moving from Low to Ultra reduces performance by 51.7%, showing the GPU's sensitivity to graphical settings. At 1440p, the same preset change causes a 53.8% reduction, and at 4K, a 56.7% reduction. This increasing sensitivity to presets at higher resolutions confirms that the GPU is the dominant performance factor in Lockdown Protocol, with the Ryzen 5 5600 providing sufficient headroom to avoid becoming a significant bottleneck.

FAQ

Q: Can this PC run Lockdown Protocol at 1920x1080 with maximum settings?

A: Yes. The Ultra preset at 1920x1080 delivers an average of 76 FPS, which is 16 FPS above the 60 FPS playability threshold. This is the best settings option at this resolution, and all four tested presets clear the threshold.

Q: What is the best playable setting at 2560x1440?

A: The High preset is the most demanding option that stays playable, with an average of 70.7 FPS. The Ultra preset falls to 52.9 FPS, so it is not recommended for consistent 60 FPS gameplay at this resolution.

Q: Is 4K gaming viable with this hardware?

A: Only at Low settings, which produces an average of 77.6 FPS. Medium settings drop to 52.5 FPS, High to 49.2 FPS, and Ultra to 33.6 FPS. Users targeting 4K must accept significant visual compromises.

Q: How much performance does the Ultra preset cost compared to Low?

A: At 1920x1080, Ultra is 51.7% slower than Low (76 FPS vs 157.5 FPS). At 2560x1440, the gap widens to 53.8% (52.9 FPS vs 114.6 FPS). At 3840x2160, Ultra is 56.7% slower than Low (33.6 FPS vs 77.6 FPS).

Q: Does the CPU or GPU limit performance more in this game?

A: The GPU is the primary limiting factor, especially at higher resolutions and presets. The performance drop from 1080p to 4K at the same preset is substantial, while the Ryzen 5 5600's 12 threads appear sufficient to feed the RTX 3060 Ti across all tested configurations.

Q: What frame rate can be expected at 1920x1080 with High settings?

A: The average is 97.1 FPS. This is 37 FPS above the 60 FPS threshold and represents a strong balance between visual quality and performance at 1080p.

The Verdict

The data clearly answers whether this PC can run Lockdown Protocol: yes, but with resolution-specific caveats. At 1920x1080, the Ryzen 5 5600 and RTX 3060 Ti combination handles every preset at or above 76 FPS, including Ultra. This makes 1080p the sweet spot for this hardware, providing the full range of graphical options with a comfortable performance margin.

At 2560x1440, the system remains playable at High settings with 70.7 FPS, and the Low and Medium presets also clear the threshold at 114.6 FPS and 83.1 FPS respectively. However, the Ultra preset at 52.9 FPS falls short, meaning users must choose between maximum quality and smooth gameplay at this resolution.

At 3840x2160, the system is only playable at Low settings, with 77.6 FPS. The higher presets all fall below 60 FPS, with Ultra dropping to just 33.6 FPS. The verdict is clear: 4K gaming is technically possible but requires sacrificing most graphical fidelity.

How This Combo Ranks

In the benchmark database, this specific CPU and GPU combination ranks 2706 out of 3714 tested combos for Lockdown Protocol. This places the system in the lower third of all configurations tested, which is surprising given the strong performance at 1080p and 1440p. The ranking reflects the broader landscape of tested hardware, where higher-end GPUs and newer CPUs push this mid-range pairing down the list.

The rank suggests that while this combo is perfectly capable for most gaming scenarios, it is not a top-tier performer in the database's full context. The RTX 3060 Ti's percentile of 59 among all GPUs and the Ryzen 5 5600's percentile of 74 among all CPUs indicate that both components sit in the mid-range of their respective categories. When combined, they produce a system that is competent but not exceptional in the overall ranking.

Similar Performance Alternatives

For users considering this CPU-GPU pairing, the nearest rival data provides context on what other hardware would behave similarly. The Ryzen 5 5600's closest competitors by average benchmark score include the Intel Core Ultra 7 258V, which scores 20454 against the 5600's 20468, a delta of just 0.1%. The AMD Ryzen 5 8500G scores 20425 (0.2% lower), while the AMD EPYC 9454P and EPYC 7713 score 20422 and 20363 respectively, all within 0.5% of the 5600. These alternatives would deliver nearly identical CPU-bound performance in Lockdown Protocol.

On the GPU side, the RTX 3060 Ti's nearest rivals show a slightly wider spread. The AMD Radeon RX 9060 scores 16014, which is 0.7% lower than the 3060 Ti's 16129. The AMD Radeon Pro 5600M scores 16351, a 1.4% advantage, while the AMD Radeon RX 5700 XT scores 16361, also 1.4% higher. The AMD Radeon R9 370X scores 15862, which is 1.7% lower. These GPUs would produce very similar frame rates in Lockdown Protocol, with the RX 5700 XT offering a marginal performance edge and the R9 370X being slightly weaker. Users with any of these alternative components can expect broadly comparable gaming experiences to the Ryzen 5 5600 and RTX 3060 Ti combination.