Lockdown Protocol

The AMD Ryzen 5 5600 and AMD Radeon RX 580 combination presents a mixed picture for Lockdown Protocol, a 2024 FPS title. The recorded data shows this pairing is only capable of delivering a consistently smooth experience at 1080p with lowered settings. Across higher resolutions, the system falls short of the 60 FPS playability threshold, making it a configuration best suited for 1080p gaming with specific preset choices.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its strongest performance. With Low settings, the average frame rate reaches 84.7 FPS, offering a comfortable margin above the 60 FPS target. Medium settings yield an average of 64.1 FPS, still playable but with less headroom. High settings drop the average to 50.4 FPS, while Ultra settings produce only 38.2 FPS on average, indicating a steep performance penalty for maximum visual quality.

Moving to 2560x1440, the frame rates decline significantly across all presets. Low settings produce an average of 59.8 FPS, just barely missing the 60 FPS playability line. Medium settings average 44.5 FPS, High settings average 39.5 FPS, and Ultra settings drop to 30.9 FPS. None of these 1440p presets achieve a playable average frame rate.

At 3840x2160, performance becomes marginal for all settings. Low settings average 41.5 FPS, Medium settings average 28.2 FPS, High settings average 24.5 FPS, and Ultra settings average 21.6 FPS. The gap between Low and Ultra at 4K is substantial, with Ultra delivering roughly half the frame rate of Low.

The database records no minimum or maximum frame rate values for any resolution or preset, so the analysis relies solely on average frame rates. The data shows a consistent pattern where each step up in resolution costs roughly 20 to 50 percent of the frame rate at equivalent settings.

CPU and GPU Roles

The scaling between resolutions and presets clarifies the balance of responsibility between the Ryzen 5 5600 and RX 580. At 1080p, the CPU has enough headroom to allow the GPU to become the limiting factor, especially at Low and Medium settings where the GPU must render frames quickly. The jump from 1080p Low at 84.7 FPS to 1440p Low at 59.8 FPS represents a 29 percent reduction, which is primarily a GPU workload increase due to the higher pixel count.

At higher presets, the CPU still matters but less so. The transition from 1080p Ultra at 38.2 FPS to 1440p Ultra at 30.9 FPS is a 19 percent drop, smaller than the Low setting drop. This indicates that at Ultra settings, both CPU and GPU are more heavily taxed, but the GPU still dominates the frame rate ceiling. The RX 580's 8 GB GDDR5 memory and 256 bit bus width provide sufficient bandwidth for 1080p, but the 256.0 GB/s bandwidth becomes a constraint at 1440p and 4K.

The Ryzen 5 5600, with its 6 cores and 12 threads, scores 18309 in Cinebench R23 multicore and 2584 in single core, placing it in the 74th percentile of all CPUs. This CPU is not the primary bottleneck at any resolution, as the GPU consistently limits performance. However, at 1080p Low, the CPU's single thread performance of 882 in 3dmark single thread could become relevant if the game engine has heavy physics or AI workloads, but the data does not show a CPU-bound scenario at any measured setting.

Similar Performance Alternatives

For the CPU, the Ryzen 5 5600's nearest rivals in the database include the Intel Core Ultra 7 258V with an average score of 20454, just 0.1 percent ahead, and the AMD Ryzen 5 8500G at 20425, 0.2 percent ahead. The AMD EPYC 9454P and AMD EPYC 7713 also sit within 0.2 and 0.5 percent respectively, though these server processors would behave differently in gaming workloads due to their core configurations. For gaming, the Core Ultra 7 258V and Ryzen 5 8500G represent the closest consumer alternatives, with virtually identical average benchmark scores.

For the GPU, the RX 580's nearest rivals include the NVIDIA GeForce RTX 3050 Ti Mobile at 12940, which is 0.1 percent slower, and the NVIDIA GeForce GTX 1660 SUPER at 12986, which is 0.4 percent faster. The AMD Radeon 740M integrated graphics at 12870 and the AMD FirePro W5100 at 12847 also fall within 0.5 and 0.6 percent respectively. In practice, the GTX 1660 SUPER would deliver nearly identical frame rates in Lockdown Protocol, while the RTX 3050 Ti Mobile would be slightly slower. The RX 580 sits in the 53rd percentile of all GPUs, making it a mid-range card from a few generations ago, and its rivals reflect that positioning.

The Verdict

This PC can run Lockdown Protocol, but only at 1080p with Low or Medium settings. The verdict by resolution is clear: at 3840x2160, no settings achieve a playable average frame rate, with the highest being Low at 41.5 FPS. At 2560x1440, the situation is similar, with Low averaging 59.8 FPS, just under the 60 FPS threshold, and no preset clearing the bar. At 1920x1080, both Low at 84.7 FPS and Medium at 64.1 FPS deliver playable performance, while High at 50.4 FPS and Ultra at 38.2 FPS do not.

For 1080p gaming, the best settings are Medium, which provide an average of 64.1 FPS, offering a balance of visual quality and performance. The system ranks 3377 out of 3714 tested combinations in the database, indicating it is on the lower end of hardware capability for this title. Players with this configuration should target 1080p Medium for a consistently smooth experience, or 1080p Low for higher frame rates at the cost of visual fidelity.

FAQ

Q: What is the maximum playable resolution for this PC in Lockdown Protocol?

A: The maximum playable resolution is 1920x1080, where Low and Medium settings both exceed the 60 FPS threshold. At 2560x1440, even Low settings average only 59.8 FPS, which falls short of the playability threshold.

Q: Which settings should I use at 1080p to get the best experience?

A: Medium settings are the best choice at 1080p, averaging 64.1 FPS. This provides a small margin above 60 FPS while offering better visual quality than Low settings, which average 84.7 FPS.

Q: Can this system handle 1440p gaming in Lockdown Protocol?

A: No, the recorded data shows no 1440p preset achieves a playable average frame rate. The closest is Low at 59.8 FPS, which is just below the 60 FPS threshold and may experience dips below that level.

Q: How does the RX 580 compare to similar GPUs in this game?

A: The RX 580 performs nearly identically to the NVIDIA GeForce GTX 1660 SUPER, which is 0.4 percent faster in average benchmark scores, and the RTX 3050 Ti Mobile, which is 0.1 percent slower. These cards would deliver very similar frame rates in Lockdown Protocol.

Q: Is the Ryzen 5 5600 a bottleneck for the RX 580 in this game?

A: The data indicates the GPU is the primary limiting factor at all resolutions and settings. The Ryzen 5 5600's benchmark scores, such as 18309 in Cinebench R23 multicore, place it well above the GPU's relative performance, so the CPU does not bottleneck the system in this title.

Q: What frame rate can I expect at 4K with Low settings?

A: At 3840x2160 with Low settings, the average frame rate is 41.5 FPS. This is well below the 60 FPS playability threshold and would not provide a smooth experience in a competitive FPS game.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 64.1 FPS. Low settings at 84.7 FPS are also playable, but Medium provides better visual quality while maintaining the required performance margin.

At 2560x1440, no preset achieves a playable average frame rate. Low settings come closest at 59.8 FPS, just under the threshold, but this falls short of the 60 FPS requirement. Players at this resolution would need to accept sub-60 FPS performance or lower the resolution.

At 3840x2160, no settings are playable either. The best average is Low at 41.5 FPS, which is far below the 60 FPS target and would result in a noticeably choppy experience in a fast-paced FPS title. For this resolution, the database records no playable settings, and the system is not recommended for 4K gaming in Lockdown Protocol.