Lockdown Protocol

The AMD Ryzen 5 5600 and AMD Radeon RX 5700 XT combination ranks 2722 out of 3714 tested combos for Lockdown Protocol, placing it in the lower-middle tier of the database. The recorded data shows that this pairing is capable of playable frame rates, but the margin for error shrinks dramatically as resolution climbs. At 1080p, the system has headroom across every preset, while at 4K it is limited to a single playable settings tier. The following analysis breaks down the measured performance, the role of each component, and the optimal settings for each resolution.

Similar Performance Alternatives

The CPU and GPU each sit close to specific rivals in the database, which helps contextualize their performance in Lockdown Protocol.

The AMD Ryzen 5 5600 has an average benchmark score of 20468, placing it at the 74th percentile of all CPUs. Its closest rival is the Intel Core Ultra 7 258V, which scores 20454, a delta of just 0.1 percent. The AMD Ryzen 5 8500G scores 20425, also 0.2 percent slower, while the AMD EPYC 9454P matches at 20422 (0.2 percent slower). The AMD EPYC 7713 trails at 20363, a 0.5 percent gap. In practical terms, any of these processors would produce nearly identical frame pacing in Lockdown Protocol, as the CPU-side differences are negligible at this performance level.

The AMD Radeon RX 5700 XT holds an average benchmark score of 16361, placing it at the 59th percentile of all GPUs. Its nearest rival is the AMD Radeon Pro 5600M at 16351, a 0.1 percent gap. The NVIDIA RTX PRO 6000 Blackwell scores 16408, which is 0.3 percent higher, and the AMD Radeon PRO W7500 scores 16415, also 0.3 percent higher. The NVIDIA GeForce RTX 5090 D V2 leads the group at 16504, 0.9 percent ahead. For Lockdown Protocol, these deltas are small enough that swapping the RX 5700 XT for any of these cards would not meaningfully change the average FPS at a given resolution and preset.

The practical takeaway is that this system behaves like a mid-tier pairing. The CPU is near the top of its class for single-threaded workloads, but the GPU becomes the limiting factor at higher resolutions. Users coming from any of the listed rival components should expect similar in-game results.

FAQ

Q: Can the AMD Ryzen 5 5600 and AMD Radeon RX 5700 XT run Lockdown Protocol at 1080p?

A: Yes. The measured data shows all four presets, Low, Medium, High, and Ultra, exceed the 60 FPS playable threshold at 1920x1080. The lowest average is 75.8 FPS on Ultra, and the highest is 158 FPS on Low.

Q: What is the best settings preset for 1440p with this hardware?

A: At 2560x1440, High is the most demanding preset that stays above 60 FPS, averaging 72.4 FPS. Medium averages 83 FPS, Low averages 114.2 FPS, and Ultra drops to 53.5 FPS, which falls below the playable threshold.

Q: Is 4K playable with the Ryzen 5 5600 and RX 5700 XT?

A: Only on Low settings. The 3840x2160 Low preset averages 73.1 FPS, while Medium averages 50.6 FPS, High averages 47.1 FPS, and Ultra averages 34.4 FPS. All presets above Low miss the 60 FPS target.

Q: How does the CPU compare to nearby processors in the database?

A: The Ryzen 5 5600 averages 20468 in benchmark scores, putting it 0.1 percent ahead of the Intel Core Ultra 7 258V and 0.2 percent ahead of the AMD Ryzen 5 8500G. The nearest rival, the AMD EPYC 9454P, is 0.2 percent slower, and the AMD EPYC 7713 is 0.5 percent slower.

Q: How does the GPU compare to nearby graphics cards?

A: The RX 5700 XT averages 16361 in benchmark scores. The AMD Radeon Pro 5600M is 0.1 percent slower, while the NVIDIA RTX PRO 6000 Blackwell and AMD Radeon PRO W7500 are both 0.3 percent faster. The NVIDIA GeForce RTX 5090 D V2 is 0.9 percent faster.

Q: What frame rates can be expected at 1080p on High settings?

A: The recorded average is 100.1 FPS at 1920x1080 with the High preset. This is comfortably above the 60 FPS threshold and leaves room for demanding scenes.

Measured FPS Breakdown

The database includes measured average FPS for three resolutions and four settings presets. No minimum or maximum frame rate values were recorded for this configuration.

At 1920x1080, the Low preset averages 158 FPS. Medium averages 111 FPS. High averages 100.1 FPS. Ultra averages 75.8 FPS. Every preset at this resolution clears the 60 FPS playable threshold, with Ultra still holding a 15.8 FPS margin.

At 2560x1440, the Low preset averages 114.2 FPS. Medium averages 83 FPS. High averages 72.4 FPS. Ultra averages 53.5 FPS. The first three presets stay above 60 FPS, but Ultra falls 6.5 FPS short of the target.

At 3840x2160, the Low preset averages 73.1 FPS. Medium averages 50.6 FPS. High averages 47.1 FPS. Ultra averages 34.4 FPS. Only Low maintains playable performance, and the gap between Low and Medium is substantial at 22.5 FPS.

The scaling pattern is consistent across resolutions. Moving from 1080p to 1440p on the same preset costs roughly 30 to 40 percent of the frame rate, and moving from 1440p to 4K costs another 35 to 40 percent. For example, High drops from 100.1 FPS at 1080p to 72.4 FPS at 1440p, then to 47.1 FPS at 4K. The Ultra preset drops from 75.8 FPS at 1080p to 53.5 FPS at 1440p, then to 34.4 FPS at 4K.

The Verdict

The question of whether this PC can run Lockdown Protocol depends entirely on the target resolution. The verdict from the recorded data is straightforward.

At 1920x1080, the system is fully capable. All four presets, Low, Medium, High, and Ultra, exceed the 60 FPS threshold. The Ultra preset averages 75.8 FPS, which is 15.8 FPS above the playable line. This is the resolution where the hardware has the most headroom.

At 2560x1440, the system is playable on three of four presets. High is the best playable option, averaging 72.4 FPS. Low and Medium also clear 60 FPS, with averages of 114.2 FPS and 83 FPS respectively. Ultra misses the target at 53.5 FPS, so users should avoid that preset at this resolution.

At 3840x2160, the system is playable only on Low, which averages 73.1 FPS. Medium, High, and Ultra all fall below 60 FPS, with averages of 50.6 FPS, 47.1 FPS, and 34.4 FPS respectively. The data indicates that 4K gaming is possible only with significant visual compromises.

In short, this PC can run Lockdown Protocol, but the experience is resolution-dependent. It is a strong 1080p machine, a solid 1440p machine with preset limitations, and a marginal 4K machine restricted to Low settings.

CPU and GPU Roles

The data shows a clear shift in component importance as resolution changes. At 1080p, the CPU still matters, but the GPU handles the load well enough that even Ultra stays above 60 FPS. The Ryzen 5 5600, with its 6 cores and 12 threads, provides enough throughput for the game's FPS workload, as indicated by its 74th percentile CPU ranking.

At 1440p, the GPU begins to take on more responsibility. The drop from High at 72.4 FPS to Ultra at 53.5 FPS is a 26 percent reduction, while the CPU-side capabilities remain constant. This indicates that the RX 5700 XT's compute resources, 2560 shading units and 9.754 TFLOPS of FP32 performance, are the deciding factor at this resolution.

At 4K, the GPU is unambiguously the bottleneck. The RX 5700 XT averages 73.1 FPS on Low but only 50.6 FPS on Medium, a 30 percent drop from a single preset step. The CPU's benchmark position, 0.1 percent ahead of the Intel Core Ultra 7 258V, suggests it is not the limiting factor. Instead, the GPU's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are strained by the 3840x2160 pixel count.

The scaling between presets reinforces this. At 1080p, the gap between Low and Ultra is 82.2 FPS (158 to 75.8). At 1440p, the same gap is 60.7 FPS (114.2 to 53.5). At 4K, the gap is 38.7 FPS (73.1 to 34.4). The shrinking delta at higher resolutions means the GPU is already near its ceiling, and preset changes have less absolute impact.

For Lockdown Protocol, the CPU is sufficient across all tested resolutions. The GPU determines whether the system stays above 60 FPS. Users with a stronger GPU would likely see better 4K results, but the Ryzen 5 5600 would not hold back performance at 1080p or 1440p based on the recorded data.

Best Settings per Resolution

The best settings for each resolution are defined as the most demanding preset that stays at or above the 60 FPS playable threshold.

At 1920x1080, the best settings are Ultra. The measured average is 75.8 FPS, which clears the threshold by 15.8 FPS. This is the highest quality option available at this resolution, and the system has enough headroom that frame drops are unlikely to cross below 60 FPS in normal gameplay.

At 2560x1440, the best settings are High. The measured average is 72.4 FPS. While Ultra would provide better visual quality, its 53.5 FPS average is below the playable threshold. High is the correct choice for a stable experience at this resolution.

At 3840x2160, the best settings are Low. The measured average is 73.1 FPS. This is the only preset at 4K that exceeds 60 FPS. Medium, High, and Ultra all fall short, with averages of 50.6 FPS, 47.1 FPS, and 34.4 FPS respectively. Users who prioritize 4K resolution should accept the Low preset or reduce the resolution to 1440p for higher visual fidelity.

The pattern is clear. At 1080p, the system delivers maximum quality. At 1440p, it delivers high quality with a 12.4 FPS margin over the threshold. At 4K, it delivers only the minimum playable experience. The RX 5700 XT is a capable 1080p and 1440p card for this game, but 4K requires substantial compromises.