Instant compatibility check with FPS benchmarks and optimization tips
Lockdown Protocol
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 67 | 90 | 103 | 144 |
| 1440p QHD | 104 | 139 | 159 | 207 |
| 1080p Full HD | 142 | 189 | 202 | 230 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Lockdown Protocol on Your System
Can the AMD Ryzen 5 5500X3D paired with the NVIDIA GeForce RTX 4070 Ti deliver a smooth Lockdown Protocol experience? The measured data says yes, and emphatically so. Across every tested resolution and preset, this combination stays far above the 60 FPS playability threshold, with even the most demanding Ultra settings at 4K producing an average of 67 FPS. This is a configuration that clearly prioritizes raw frame rate headroom, making it a strong candidate for high-refresh-rate monitors and future-proofing against more demanding game updates.
Measured FPS Breakdown
The benchmark results for this combo show a consistent pattern of high performance, with the GPU scaling predictably as resolution and graphical load increase. At 1920x1080, the lowest resolution tested, the system is clearly GPU-bound at lower presets but still delivers exceptional numbers. With Low settings, the average FPS hits 230, while Medium settings only drop this to 202 FPS. Interestingly, the jump to High settings reduces the average to 189 FPS, and cranking everything to Ultra still yields a very playable 142 FPS average. The only available min/max data at this resolution comes from the Medium preset, which shows a minimum of 172 FPS and a maximum of 233 FPS, indicating excellent frame pacing and a tight performance envelope.
Moving up to 2560x1440, the demands on the GPU increase, but the RTX 4070 Ti handles it with ease. The Low preset delivers an average of 207 FPS, which is still exceptionally high. Selecting Medium brings the average down to 159 FPS, with a minimum of 135 FPS and a maximum of 183 FPS, demonstrating that even in more chaotic scenes, the frame rate rarely dips below the 60 FPS target. The High preset at this resolution produces a 139 FPS average, while the Ultra preset, which often stresses memory bandwidth and shader complexity, still maintains a robust 104 FPS average.
At the demanding 3840x2160 (4K) resolution, the performance scales down as expected but never falls below the playable threshold. The Low preset achieves an impressive 144 FPS average, showcasing the raw horsepower of the GPU. The Medium preset offers a 103 FPS average with a minimum of 87 FPS and a maximum of 118 FPS, which is a very stable range for 4K gaming. The High preset is still smooth at 90 FPS average, and the most demanding Ultra preset, which combines maximum draw distances, particle effects, and texture quality, still manages a solid 67 FPS average. This data indicates that the combo is not just capable of running the game at 4K, but it does so with enough headroom to avoid noticeable stutters.
Similar Performance Alternatives
Looking at the CPU benchmark data, the Ryzen 5 5500X3D sits in a tight cluster of similarly performing processors. Its nearest rival, the AMD Ryzen 5 5600F, is a mere 0.2% behind in average score, meaning in-game CPU-bound scenarios would feel nearly identical. The Intel Core Ultra 5 225 is also 0.2% faster, while the AMD Ryzen AI 7 PRO 450 is 0.2% slower. The Intel Core i9-12900T completes the group, scoring 0.3% higher. For Lockdown Protocol, where the GPU is likely the primary bottleneck at higher resolutions, these minor CPU differences would translate to a negligible impact on the final FPS numbers, making any of these processors a viable alternative without a perceptible change in performance.
On the GPU side, the RTX 4070 Ti is positioned among a more varied set of rivals. The NVIDIA GeForce RTX 5090 Mobile is 0.8% faster, while the AMD Radeon Pro 5500 XT and Intel Arc A730M are 1.3% and 1.7% faster, respectively. Conversely, the NVIDIA RTX A6000 is 1.6% slower. These deltas are small, but they do exist. For a game like Lockdown Protocol, a user with an RTX 5090 Mobile or an Intel Arc A730M could expect slightly higher frame rates, particularly at 4K where the GPU is more heavily utilized. However, the differences are so marginal that they fall within the range of run-to-run variance, meaning the gaming experience would be practically equivalent.
CPU and GPU Roles
The data suggests a clear shift in workload balance as resolution changes. At 1920x1080, the system is more capable of feeding the GPU, and the high FPS numbers at Low settings (230 FPS) indicate that neither component is a hard bottleneck. However, the significant drop from Low to Ultra settings (230 FPS to 142 FPS) shows that the GPU's rendering workload is the primary variable. At 2560x1440, the same pattern holds, but the absolute FPS values are lower, confirming that the GPU is taking on more work. The transition from 1080p Medium (202 FPS) to 1440p Medium (159 FPS) is a 21% reduction, which is typical for a resolution increase.
The picture becomes more defined at 3840x2160. Here, the GPU is unequivocally the dominant factor. The drop from Low to Ultra at 4K (144 FPS to 67 FPS) is a 53% reduction, which is far more pronounced than the 38% drop seen at 1440p (207 FPS to 104 FPS). This indicates that at 4K, the RTX 4070 Ti's shading units, memory bandwidth, and texture fill rate are fully saturated. The CPU, while not idle, is no longer the limiting factor; its 6 cores and 12 threads with 96 MB of L3 cache are sufficient to keep the GPU fed with draw calls and game logic. The data implies that users targeting 4K will see almost all performance scaling tied to the GPU, while at 1080p, the CPU's capabilities become more relevant for achieving the highest possible frame rates.
The Verdict
The benchmark data is unambiguous: this PC configuration can run Lockdown Protocol exceptionally well. According to the verdict by resolution, every single settings preset at every tested resolution is considered playable, as all average FPS values are above the 60 FPS playability threshold. At 1920x1080, the system achieves a minimum of 142 FPS on Ultra settings, which is more than double the target. At 2560x1440, the Ultra preset delivers a 104 FPS average, providing a smooth and highly responsive experience for competitive play. Even at 3840x2160, the most demanding scenario, the Ultra preset clears the threshold with a 67 FPS average, meaning users do not have to compromise on visual fidelity to maintain playability. This combo is not just able to run the game; it is able to run it with maximum settings at all tested resolutions.
Best Settings per Resolution
For players seeking the highest visual quality without dropping below 60 FPS, the choice is simple: the Ultra preset is the best option at every resolution.
- At 1920x1080, the Ultra preset yields an average of 142 FPS, which is well above the threshold and ideal for high-refresh-rate 1080p monitors.
- At 2560x1440, the Ultra preset produces a 104 FPS average, offering a great balance of visual fidelity and smoothness for 1440p displays.
- At 3840x2160, the Ultra preset still holds an average of 67 FPS, making it the recommended choice for 4K gaming, provided the user is comfortable with an average frame rate closer to the 60 FPS baseline.
Since all presets are playable, users with less powerful displays or those who prioritize competitive frame rates could also use the High preset, which offers a 189 FPS average at 1080p and a 90 FPS average at 4K, but the Ultra preset remains the benchmark for the best visual experience.
How This Combo Ranks
In the grand scheme of the benchmark database, this specific combination of the AMD Ryzen 5 5500X3D and the NVIDIA GeForce RTX 4070 Ti holds a rank of 616 out of 3714 tested combos for Lockdown Protocol. This places it in the top 16.6% of all configurations tested, which is a strong showing. The high rank is a direct consequence of the GPU's excellent performance, as the RTX 4070 Ti sits in the 84th percentile of all GPUs, while the CPU is in the 85th percentile of all CPUs. The combination of two high-percentile components results in a system that outperforms the vast majority of other tested setups, ensuring that users with this hardware are getting a top-tier experience in this specific title.
FAQ
Q: Can this PC run Lockdown Protocol at 4K with maximum settings?
A: Yes. The data shows that at 3840x2160 resolution with the Ultra preset, the system achieves an average of 67 FPS, which is above the 60 FPS playability threshold.
Q: What is the best settings preset for 1440p gaming?
A: The Ultra preset is the best choice, as it maintains an average of 104 FPS at 2560x1440, which is well above the playable threshold and provides the highest visual quality.
Q: How does the Ryzen 5 5500X3D compare to its closest CPU rival?
A: The closest rival is the AMD Ryzen 5 5600F, which has an average benchmark score that is 0.2% lower than the 5500X3D, indicating nearly identical performance.
Q: Is the frame rate stable, or are there significant dips?
A: The available min/max data shows stability. For example, at 2560x1440 with Medium settings, the average is 159 FPS with a minimum of 135 FPS and a maximum of 183 FPS, suggesting consistent performance.
Q: What is the lowest average FPS recorded for this combo?
A: The lowest average FPS recorded is 67, which occurs at 3840x2160 resolution with the Ultra preset. This is still the highest playable setting at that resolution.
Q: Does the GPU or CPU have a larger impact on performance at 1080p?
A: The data indicates that the GPU is the primary factor. At 1920x1080, the average FPS drops by 88 FPS when moving from Low to Ultra settings (230 to 142 FPS), showing that the rendering load on the GPU is the main performance variable.