Lockdown Protocol

The AMD Ryzen 5 5500 and NVIDIA GeForce RTX 4070 combination delivers a strong showing in Lockdown Protocol, with measured frame rates that comfortably exceed the 60 FPS playable threshold at most resolution and settings combinations. The data indicates this pairing is well-suited for high-refresh-rate gaming at 1080p and 1440p, while 4K performance is respectable at medium-to-high settings, though Ultra settings fall below the playable threshold.

Measured FPS Breakdown

At 1920x1080, the combination produces excellent frame rates across all presets. The Low preset delivers an average of 238.8 FPS, which is the highest measured value for this resolution. Medium settings achieve 185.9 FPS, High settings reach 162.9 FPS, and even the demanding Ultra preset maintains a strong 121.1 FPS average. These numbers indicate that the system has substantial headroom at 1080p, with the Ultra preset still delivering more than double the 60 FPS playable threshold.

Moving to 2560x1440, performance remains very strong though naturally lower than 1080p. The Low preset yields 191.2 FPS, Medium settings produce 135.6 FPS, and High settings achieve 118.7 FPS. The Ultra preset at 1440p delivers 86.3 FPS, which remains comfortably above the playable threshold. The scaling from 1080p to 1440p shows a typical resolution penalty, with the Ultra preset dropping from 121.1 FPS to 86.3 FPS, a reduction of approximately 29 percent.

At 3840x2160, the performance picture changes more dramatically. The Low preset still delivers a strong 126.1 FPS, which is remarkable for 4K. Medium settings achieve 90.7 FPS, and High settings produce 75.1 FPS. However, the Ultra preset drops to 56.6 FPS, which falls below the 60 FPS playable threshold. This makes Ultra settings at 4K the only configuration in the measured data that fails to maintain playable frame rates.

The spread between presets grows substantially as resolution increases. At 1080p, the difference between Low and Ultra is 117.7 FPS, while at 1440p the spread narrows to 104.9 FPS, and at 4K it compresses to 69.5 FPS. This pattern suggests that at higher resolutions, the GPU becomes the limiting factor, reducing the relative impact of graphics settings. Conversely, at 1080p, the CPU has more influence on the upper frame rate ceiling, which is why the Low preset reaches such high values.

CPU and GPU Roles

The benchmark results reveal a clear division of labor between the Ryzen 5 5500 and RTX 4070 depending on resolution. At 1920x1080, the system achieves frame rates as high as 238.8 FPS on Low settings, indicating that the CPU is capable of feeding the GPU at very high rates. The Ryzen 5 5500, with its 6 cores and 12 threads based on Zen 3 architecture, appears sufficient to avoid bottlenecking the RTX 4070 at this resolution.

The scaling between 1080p and 1440p shows that the GPU begins to take on more responsibility as resolution increases. For the Low preset, performance drops from 238.8 FPS to 191.2 FPS, a 20 percent reduction. For the Ultra preset, the drop is from 121.1 FPS to 86.3 FPS, a 29 percent reduction. This larger relative drop at Ultra settings suggests that the GPU workload scales more steeply with resolution when higher quality effects are enabled.

At 3840x2160, the GPU's role becomes dominant. The Low preset still manages 126.1 FPS, which is only 34 percent lower than the 1440p Low result. However, the Ultra preset at 4K falls to 56.6 FPS, which is 34 percent below the 1440p Ultra result. The fact that the 4K Ultra result is the only measurement below 60 FPS strongly indicates that the RTX 4070's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are being pushed to their limits at this extreme configuration.

The RTX 4070's Ada Lovelace architecture, with 5888 shading units and 46 RT cores, provides ample compute for most scenarios. The processor's 16 MB of L3 cache and dual-channel DDR4 memory support at 51.2 GB/s bandwidth appear well-matched to the GPU's needs at 1080p and 1440p. At 4K, however, the GPU's 29.15 TFLOPS of FP32 performance becomes the primary constraint, particularly with Ultra settings that likely enable heavy post-processing and shadow effects.

FAQ

*Q: Can this system run Lockdown Protocol at 4K?*

A: Yes, but with limitations. The High preset achieves 75.1 FPS, Medium delivers 90.7 FPS, and Low reaches 126.1 FPS, all above the 60 FPS threshold. However, the Ultra preset falls to 56.6 FPS, which is below playable levels.

Q: What is the best settings preset for 1440p gaming?

A: The Ultra preset is fully playable at 1440p with an average of 86.3 FPS. Since this is the highest quality setting and still clears the 60 FPS threshold, it is the recommended choice for 1440p displays.

Q: How does the RTX 4070 compare to its nearest GPU rivals in this system?

A: The RTX 4070 has an average benchmark score of 37648, placing it slightly ahead of the NVIDIA Tesla P4 by 0.1 percent and the AMD Radeon RX Vega 56 by 0.4 percent. It trails the NVIDIA GeForce RTX 4080 Mobile by 1.3 percent and leads the AMD Radeon PRO W6400 by 1.3 percent.

Q: Is the Ryzen 5 5500 a bottleneck for the RTX 4070?

A: At 1080p, the data shows no significant bottleneck, as the system reaches 238.8 FPS on Low settings. At higher resolutions, the GPU becomes the limiting factor, meaning the CPU is not holding back performance in those scenarios.

Q: What frame rates can be expected at 1080p with High settings?

A: The High preset at 1920x1080 delivers an average of 162.9 FPS. This is well above the 60 FPS threshold and provides ample performance for high-refresh-rate monitors.

Q: Does the system meet the 60 FPS threshold at all resolutions?

A: No. The only configuration that fails to reach 60 FPS is 4K with Ultra settings, which averages 56.6 FPS. Every other combination of resolution and preset tested exceeds the 60 FPS threshold.

The Verdict

The verdict data shows that this combination of AMD Ryzen 5 5500 and NVIDIA GeForce RTX 4070 can run Lockdown Protocol effectively across most configurations. At 1920x1080, all four presets—Low, Medium, High, and Ultra—are playable, with the Ultra preset achieving 121.1 FPS. This makes 1080p gaming exceptionally smooth, even at maximum quality settings.

At 2560x1440, the system again clears the 60 FPS threshold at every preset. The Ultra settings deliver 86.3 FPS, which is the recommended configuration for 1440p displays. This resolution offers a strong balance between visual fidelity and performance, with the Ultra preset providing high-quality visuals while maintaining frame rates well above the playable threshold.

At 3840x2160, the situation is more nuanced. The High, Medium, and Low presets are all playable, with average frame rates of 75.1, 90.7, and 126.1 FPS respectively. The High preset is the best playable setting, offering the highest quality while still maintaining a 75.1 FPS average. However, the Ultra preset falls to 56.6 FPS, which is below the 60 FPS threshold. For 4K gaming, users should stick to High settings or lower to ensure smooth gameplay.

Overall, this system is well-suited for 1080p and 1440p gaming with room to spare, and it can handle 4K gaming at High settings. The only caveat is that 4K Ultra settings are not playable, so users with 4K displays should plan to use High settings for the best experience.

Similar Performance Alternatives

Looking at the CPU side, the Ryzen 5 5500 has an average benchmark score of 19593, placing it in the 73rd percentile of all CPUs. Its nearest rivals show very similar performance levels. The AMD Ryzen AI 5 430 scores 19617, a difference of -0.1 percent, making it essentially equivalent in performance. The Intel Core i5-12500 scores 19668, which is 0.4 percent higher, while the Intel Core i7-10700F scores 19499, which is 0.5 percent lower. The Intel Core i5-11600KF completes the group with a score of 19723, 0.7 percent higher.

These rival CPUs would produce nearly identical frame rates in Lockdown Protocol when paired with the RTX 4070. The performance deltas are all within 1 percent, meaning users with any of these processors would see virtually indistinguishable results. The choice between them would come down to platform features and pricing rather than gaming performance.

On the GPU side, the RTX 4070 has an average benchmark score of 37648, placing it in the 81st percentile of all GPUs. Its nearest rivals are also very close in performance. The NVIDIA Tesla P4 scores 37628, a 0.1 percent difference, while the AMD Radeon RX Vega 56 scores 37507, which is 0.4 percent lower. The NVIDIA GeForce RTX 4080 Mobile scores 38135, 1.3 percent higher, and the AMD Radeon PRO W6400 scores 37157, 1.3 percent lower.

When paired with the Ryzen 5 5500, these GPU alternatives would produce similar frame rates in Lockdown Protocol. The RTX 4080 Mobile would offer a marginal improvement, while the RX Vega 56 and PRO W6400 would be slightly slower. In practice, the differences are minor enough that all of these GPUs would deliver playable performance at 1080p and 1440p, with the RTX 4070 being the strongest of the group except for the RTX 4080 Mobile.

How This Combo Ranks

The combination of the Ryzen 5 5500 and RTX 4070 ranks 971st out of 3714 tested combinations in Lockdown Protocol. This places it in the top 26 percent of all systems tested, indicating that it performs well relative to the broader field of hardware configurations.

The ranking reflects the strong performance of the RTX 4070, which sits in the 81st percentile of all GPUs, combined with the mid-range Ryzen 5 5500, which sits in the 73rd percentile of all CPUs. The combination leverages the GPU's high performance while the CPU provides adequate support at most resolutions.

For users considering this build, the 971st ranking out of 3714 combinations demonstrates that it is a capable system for Lockdown Protocol, particularly at 1080p and 1440p where it delivers excellent frame rates. The fact that it ranks in the upper quartile of all tested combinations suggests that it will handle the game well without requiring compromises at standard gaming resolutions. The 4K Ultra limitation is the only notable weakness, and it is a common constraint for many mid-range to high-end systems.