Lockdown Protocol

This PC pairing—an AMD Ryzen 5 5500 with an NVIDIA GeForce RTX 3050 4 GB—is a mainstream desktop combination aimed at 1080p gaming. In Lockdown Protocol, the benchmark data shows a system that can handle the game comfortably at 1080p with quality settings, but which runs out of headroom as resolution increases. The following analysis breaks down the measured performance, the role of each component, and what settings you can realistically use.

FAQ

*Q: Can this PC run Lockdown Protocol at 1080p?*

A: Yes. The measured results show playable performance at 1080p on Low, Medium, and High settings. The High preset averages 70.4 FPS, Medium averages 80.3 FPS, and Low averages 114.4 FPS, all clearing the 60 FPS playable threshold.

Q: What is the best 1080p setting for this system?

A: The best playable setting at 1920x1080 is High, with an average of 70.4 FPS. This is the most demanding preset that stays at or above 60 FPS. The Ultra preset at this resolution drops to 50.0 FPS, which is below the playable threshold.

Q: Does the game run well at 1440p?

A: Only on the Low preset. At 2560x1440, the Low settings produce an average of 80.9 FPS, which is playable. Medium (56.5 FPS) and High (53.4 FPS) both fall short of 60 FPS, and Ultra (40.2 FPS) is significantly below the threshold.

Q: Is 4K gaming possible with this hardware?

A: No. At 3840x2160, even the Low preset only averages 51.1 FPS, which is below the 60 FPS playable threshold. Medium (40.0 FPS), High (33.6 FPS), and Ultra (25.3 FPS) are all unplayable by this standard.

Q: How does the CPU compare to similar processors?

A: The Ryzen 5 5500 has an average benchmark score of 19593, placing it in the 73rd percentile of all CPUs. Its nearest rival, the AMD Ryzen AI 5 430, scores 19617, which is only 0.1% higher. The Intel Core i5-12500 is 0.4% ahead, and the Intel Core i5-11600KF is 0.7% ahead, while the Intel Core i7-10700F trails by 0.5%.

Q: What is the GPU's performance percentile?

A: The RTX 3050 4 GB sits in the 50th percentile of all GPUs, indicating mid-pack performance. It is an end-of-life product (released January 2022) with 4 GB of GDDR6 memory on a 128-bit bus.

CPU and GPU Roles

The division of labor between the Ryzen 5 5500 and the RTX 3050 4 GB in Lockdown Protocol is best understood by looking at how frame rates scale with resolution and settings. The data shows a pattern typical of a GPU-bound title at higher resolutions, but with CPU headroom that becomes relevant at lower settings.

At 1920x1080, the frame rate varies dramatically with settings. The jump from Low (114.4 FPS) to Medium (80.3 FPS) is a 30% drop, and the drop from Medium to High (70.4 FPS) is another 12%. This strong scaling with settings indicates that the GPU is the primary limiter even at 1080p. The CPU's 6 cores and 12 threads, with a boost clock of 4.20 GHz, are sufficient to feed the GPU at these frame rates, as evidenced by the high Low-preset average.

Moving to 2560x1440, the GPU load increases further. The Low preset still delivers 80.9 FPS, but Medium drops to 56.5 FPS and High to 53.4 FPS. The gap between Medium and High narrows at 1440p compared to 1080p, which suggests that the GPU is becoming saturated and the settings have a smaller relative impact. The CPU's role diminishes as the GPU takes longer to render each frame.

At 3840x2160, the GPU is clearly the bottleneck. Even Low settings only produce 51.1 FPS, and High drops to 33.6 FPS. The 4K results show a steep decline from 1440p, with the Low preset losing 37% of its performance when moving from 1440p to 4K. This is a pure GPU limitation; no CPU adjustment would recover these frame rates.

In summary, the CPU is adequate for this game at all tested resolutions, as it never appears to cap performance. The GPU dictates playability entirely. At 1080p, the RTX 3050 4 GB has enough headroom for High settings. At 1440p, only Low is viable. At 4K, no settings are playable.

Similar Performance Alternatives

The CPU and GPU have different competitive landscapes, and the data provides clear comparisons for the processor.

The AMD Ryzen 5 5500's average benchmark score of 19593 places it in a tight cluster of rivals. The AMD Ryzen AI 5 430 scores 19617, a delta of -0.1% (meaning the Ryzen 5 5500 is essentially tied). The Intel Core i5-12500 scores 19668, which is 0.4% higher. The Intel Core i7-10700F scores 19499, which is 0.5% lower. The Intel Core i5-11600KF scores 19723, which is 0.7% higher. In practical terms, all four of these processors would deliver nearly identical performance in Lockdown Protocol, since the game's frame rates are not CPU-bound in the tested scenarios. Any of these CPUs would pair similarly with the RTX 3050 4 GB.

The GPU's nearestRivals list is empty in the data. However, its percentile ranking of 50 (mid-pack) and its specifications—2048 shading units, 64 TMUs, 32 ROPs, and a 128-bit memory interface—indicate it is a mainstream part. In the context of this game, the GPU's performance is the deciding factor; a GPU with a higher percentile would be needed to unlock Medium or High settings at 1440p.

The Verdict

The data is unambiguous: this PC can run Lockdown Protocol at 1080p with quality settings, but it cannot handle 1440p or 4K at playable frame rates.

At 1920x1080, the verdict list includes High, Low, and Medium as playable settings. The best settings are High, averaging 70.4 FPS. This clears the 60 FPS threshold with a reasonable margin, though it is not a massive cushion. For a more comfortable experience, Medium at 80.3 FPS or Low at 114.4 FPS are available.

At 2560x1440, the only playable setting is Low, averaging 80.9 FPS. This is playable, but it means sacrificing visual quality. Medium (56.5 FPS), High (53.4 FPS), and Ultra (40.2 FPS) all fail to reach 60 FPS.

At 3840x2160, there are no playable settings. The best result is Low at 51.1 FPS, which is below the threshold. Using this PC at 4K would require lowering the resolution or accepting a sub-60 FPS experience.

The overall combo rank for this game is 3258 out of 3714, indicating that this pairing is on the lower end of tested configurations. This is consistent with the mid-pack GPU percentile and the 73rd percentile CPU.

Measured FPS Breakdown

The measured data provides a full picture of performance across resolutions and settings. All values are average FPS; minimum and maximum values are not reported.

At 3840x2160, the results are:

• Ultra: 25.3 FPS
• High: 33.6 FPS
• Medium: 40.0 FPS
• Low: 51.1 FPS

At 2560x1440, the results are:

• Ultra: 40.2 FPS
• High: 53.4 FPS
• Medium: 56.5 FPS
• Low: 80.9 FPS

At 1920x1080, the results are:

• Ultra: 50.0 FPS
• High: 70.4 FPS
• Medium: 80.3 FPS
• Low: 114.4 FPS

The scaling pattern is consistent. At 1080p, the spread from Low to Ultra is 64.4 FPS, showing high GPU sensitivity to settings. At 1440p, the spread narrows to 40.7 FPS. At 4K, it narrows further to 25.8 FPS. This compression of frame rates at higher resolutions confirms that the GPU is the limiting factor; as resolution increases, the absolute cost of each setting level becomes a smaller fraction of the total render time.

The transition from 1080p Low to 1440p Low results in a 29% frame rate drop (114.4 to 80.9 FPS). The same transition for Medium is a 30% drop (80.3 to 56.5 FPS). For High, it is a 24% drop (70.4 to 53.4 FPS). These percentages are all substantial, reinforcing that resolution scaling is the primary determinant of playability.

Best Settings per Resolution

Selecting the right settings requires balancing visual quality against the 60 FPS playable threshold. The data identifies the most demanding preset that stays at or above 60 FPS for each resolution.

At 1920x1080, the best settings are High, averaging 70.4 FPS. This provides a solid 17% margin above the threshold. If you prefer higher frame rates, Medium (80.3 FPS) or Low (114.4 FPS) are options, but High is the maximum quality that remains playable. Ultra at 50.0 FPS is not viable.

At 2560x1440, the best settings are Low, averaging 80.9 FPS. This is the only preset that clears the threshold. The margin is comfortable, but the visual quality is limited. If you want to try Medium (56.5 FPS) or High (53.4 FPS), you would need to accept frame rates below 60 FPS, which is not recommended for a fast-paced FPS.

At 3840x2160, there is no best setting, as no preset reaches 60 FPS. The closest is Low at 51.1 FPS, but it falls short. The conclusion is to avoid 4K with this hardware for Lockdown Protocol.

For a practical recommendation, 1080p High is the sweet spot. It delivers a playable frame rate with the best visual fidelity the system can manage. At 1440p, Low is the only playable option, and the experience will look noticeably less detailed. The data suggests this PC is best suited to 1080p displays.